Qazqa 44964 Bruksanvisning

Qazqa Lättnad 44964

Läs nedan 📖 manual på svenska för Qazqa 44964 (2 sidor) i kategorin Lättnad. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

INSTRUCTION MANUAL

These instructions are for your safety. Please read through them thoroughly prior to installation and

retain them for future reference.

Warnings

 This product is Class I and must be earthed.

 It is recommended that this fitting is installed by a qualified electrician.

 This fitting should be fitted in accordance with IEE Regulations and the Building Regulations.

 For you safety, switch off at the mains supply before installing or maintaining this fitting. Ensure

other persons cannot restore the electricity supply without you acknowledgement.

 If you are in any doubt, please consult a qualified electrician.

 If replacing an existing fitting, make a note of the connections.

 Always use the correct type and wattage bulb. Never exceed the wattage stated.

 When changing a bulb, always switch off at the mains and allow the old bulb to cool down before

handling. Dispose of used bulbs carefully.

 The bulb and surrounding parts can become extremely hot during use.

 Cable Type - The correct cable must be used for wiring this fitting. We suggest that you use

H05RN-F specification cable (not supplied) which is an outdoor grade, rubber sheathed cable.

Running it inside a plastic conduit (not supplied) should further protect it. Alternatively, if the cable is

to be in an area where it could become damaged, you should use special armoured cable. This type

of cable has a sheath that is strengthened to protect against damage from objects such as garden

tools, lawnmowers etc. The cable must have a minimum cross sectional area of 1.0mm² and

wherever possible, cables should be run horizontally. Bury the cable minimum of 50cm.

 A light fitting should be connected to a lighting circuit protected by a 5-amp fuse, (or 6-amp residual

current device). If a light fitting is to be connected to a ring main, a fused connection unit fitted with a

3-amp fuse should be installed. This product is only suitable for connection to AC 220-240V / 50Hz

supply.

 We always recommend the use of an approved RCD unit.

 Replace any cracked/damaged diffuser immediately-do not use if they are damaged.

 The fitting is suitable to be installed in normally non-accessible areas. The product cannot be

mounted in areas where motor vehicles may circulate, carriageways, parking areas.

 The product has a rated maximum surface temperature of 160 ºC.

 Dangerous voltage! To indicate hazards arising from dangerous voltages.

 We recommend only using the lamp that is with ultraviolet ray filter.

Specifications

Product type: 44964

Rated voltage: AC 220-240V, 50Hz

Source of light: 70W, G12 (included)

Degree of protection: IP67 ＆ IP65

Protection class: I

44964

Produktspecifikationer

Varumärke:	Qazqa
Kategori:	Lättnad
Modell:	44964

Behöver du hjälp?

Om du behöver hjälp med Qazqa 44964 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Lättnad Qazqa Manualer

Qazqa 90501 Bruksanvisning

11 September 2024

Qazqa 90497 Bruksanvisning

10 September 2024

Qazqa 89430 Bruksanvisning

10 September 2024

Qazqa 45095 Bruksanvisning

10 September 2024

Qazqa 44964 Bruksanvisning

10 September 2024

Lättnad Manualer

Nyaste Lättnad Manualer

Ansmann FL4500AC Bruksanvisning

27 Oktober 2024

Brennenstuhl 1171250801 Bruksanvisning

27 Oktober 2024

Steinel FRS 30 Bruksanvisning

27 Oktober 2024

Stairville DMX Invader 2420 MK II Bruksanvisning

27 Oktober 2024

Aqara LED Light Bulb (Tunable White) Bruksanvisning

26 Oktober 2024

V-Tac VT-7959 Bruksanvisning

26 Oktober 2024

Quoizel Latitude LTT1628EK Bruksanvisning

26 Oktober 2024

Elan Osk 83765 Bruksanvisning

25 Oktober 2024

ET2 Centrum E23312-24PC Bruksanvisning

23 Oktober 2024

ET2 Blossom E32797-93BK Bruksanvisning

23 Oktober 2024