QSC Cinema Core 110c Bruksanvisning

QSC Inte kategoriserad Cinema Core 110c

Läs nedan 📖 manual på svenska för QSC Cinema Core 110c (13 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/13

™

Hardware User Guide

Q-SYS Core 110f

Q-SYS Cinema Core 110c

TD-001541-01-B

*TD-001541-01*

TD-001541-01-B

EXPLANATION OF TERMS AND SYMBOLS

The term “WARNING!” indicates instructions regarding personal safety. If the instructions are not followed the result may be bodily injury or death.

The term “CAUTION!” indicates instructions regarding possible damage to physical equipment. If these instructions are not followed, it may result in

damage to the equipment that may not be covered under the warranty.

The term “IMPORTANT!” indicates instructions or information that are vital to the successful completion of theprocedure.

The term "NOTE" is used to indicate additional useful information.

The intent of the lightning ﬂash with arrowhead symbol in a triangle is to alert the user to the presence of un-insulated "dangerous"

voltage within the product's enclosure that may be of sufﬁcient magnitude to constitute a risk of electric shock to humans.

The intent of the exclamation point within an equilateral triangle is to alert the user to the presence of important safety, and operating and

maintenance instructions in this manual.

IMPORTANT SAFETY INSTRUCTIONS

WARNING!: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS

EQUIPMENT TO RAIN OR MOISTURE.

Elevated Operating Ambient - If installed in a closed or multi-unit rack assembly, the

ambient operating temperature of the rack environment may be greater than room

ambient. Consideration should be given to ensure that the maximum operating

temperature range (0°C to 50°C (32°F to 122°F ) is not exceeded. – Reduced Air Flow

Installation of the equipment in a rack should be such that the amount of air ﬂow

required for safe operation of the equipment is not compromised.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Do not submerge the apparatus in water or liquids.

7. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus.

8. Clean only with a dry cloth.

9. Do not block any ventilation opening. Install in accordance with the manufacturer's instructions.

10. Keep all ventilation openings free of dust or other matter.

11. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliﬁers) that produce heat.

12. To reduce the risk of electrical shock, the power cord shall be connected to a mains socket outlet with a protective earthing connection.

13. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A

grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided

plug does not ﬁt into your outlet, consult an electrician for replacement of the obsolete outlet.

14. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from

theapparatus.

15. Do not unplug the unit by pulling on the cord, use the plug.

16. Only use attachments/accessories speciﬁed by the manufacturer.

17. Unplug this apparatus during lightning storms or when unused for long periods of time.

18. Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been damaged in any way, such as

power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to

rain or moisture, does not operate normally, or has been dropped.

19. The appliance coupler, or the AC Mains plug, is the AC mains disconnect device and shall remain readily accessible after installation.

20. Adhere to all applicable, local codes.

21. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.

TD-001541-01-B

Maintenance and Repair

WARNING!: Advanced technology, e.g., the use of modern materials and

powerful electronics, requires specially adapted maintenance and repair

methods. To avoid a danger of subsequent damage to the apparatus, injuries

to persons and/or the creation of additional safety hazards, all maintenance

or repair work on the apparatus should be performed only by a QSC

authorized service station or an authorized QSC International Distributor.

QSC is not responsible for any injury, harm or related damages arising from

any failure of the customer, owner or user of the apparatus to facilitate those

repairs.

LITHIUM BATTERY WARNING

WARNING!: THIS EQUIPMENT CONTAINS A NON-RECHARGEABLE LITHIUM

BATTERY. LITHIUM IS A CHEMICAL KNOWN TO THE STATE OF CALIFORNIA TO

CAUSE CANCER OR BIRTH DEFECTS. THE NON-RECHARGEABLE LITHIUM

BATTERY CONTAINED IN THIS EQUIPMENT MAY EXPLODE IF IT IS EXPOSED TO

FIRE OR EXTREME HEAT. DO NOT SHORT CIRCUIT THE BATTERY. DO NOT

ATTEMPT TO RECHARGE THE NON-RECHARGEABLE LITHIUM BATTERY. THERE IS

A RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN INCORRECT TYPE.

FCC Statement

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the

FCCRules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses

and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

FCC Part 68 / ACTA

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the rear panel of this equipment is a label

that contains, among other information, a product identiﬁer in the format US:AAAEQ##TXXXX. If requested, this number must be provided to the

telephone company.

A plug and jack used to connect this equipment to the premises wiring and telephone network must comply with the applicable FCC Part 68 rules

and requirements adopted by the ACTA. A compliant telephone cord and modular plug is provided with this product. It is designed to be connected

to a compatible modular jack that is also compliant. See installation instructions for details.

The REN is used to determine the number of devices that may be connected to a telephone line. Excessive RENs on a telephone line may result in the

devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not exceed ﬁve (5.0). To be certain of the number

of devices that may be connected to a line, as determined by the total RENs, contact the local telephone company. The REN for this product is part of the