QSC HF-63 Bruksanvisning

QSC högtalare HF-63

Läs nedan 📖 manual på svenska för QSC HF-63 (20 sidor) i kategorin högtalare. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/20
*TD-000149-00*
Cinema Loudspeaker Systems User Manual
HF-63 High Frequency Component
Introduction
The HF-63 is the high frequency component of two-way, biamplified screen
channel loudspeaker systems for high performance cinema applications. It
was designed to operate with and be directly mounted on QSC’s LF-3115 or
LF-3215 cinema woofer.
The HF-63 high-frequency system features a large format, 2.5” (63.5mm)
titanium diaphragm compression driver mounted on a custom designed high-
frequency cinema horn with an adjustable pan and tilt bracket. The horn fea-
tures broad horizontal and vertical coverage angles to ensure coverage of
every seat in the auditorium. The horn is a low-distortion waveguide provid-
ing highly articulate dialogue without coloration associated with conven-
tional horn loudspeakers.
The HF-63 includes a driver protection and equalization network to assure
reliable operation. DC blocking capacitors protect against DC or low-fre-
quency signals that could damage an unprotected driver. Power limiter cir-
cuitry protects the driver from over-powering and a response correction filter
smoothes the frequency response of the horn/driver combination. Outboard
processing is required, however, as the response correction filter is not a
crossover.
The HF-63 components come pre-assembled to reduce field assembly time.
Three bolts are all that are required to secure the HF-63 to the top of a QSC
low frequency enclosure.
Mounting
Refer to the illustration for mounting information. The HF-63 attaches to the
top of the LF-3115 or LF-3215 with three 5/16-18 bolts, 0.75” long, with lock
washers. This hardware ships installed on the low frequency cabinet. We
recommend the use of serviceable thread locking compound when installing
the bolts to prevent loosening due to vibration. Aim the horn in the horizon-
tal plane (pan) before tightening. Adjust the vertical tilt with the bracket
adjustment.
Install in accordance with QSC Audio Product’s instructions
and a licensed, professional engineer. Only use attachments,
mounts, accessories, or brackets specified by QSC Audio
Products, Inc. Refer all servicing to qualified personnel. Ser-
vicing is required when the apparatus has been damaged in
any way.
WARNING! Before placing, installing, rigging, or suspending
any speaker product, inspect all hardware, suspension, cab-
inets, transducers, brackets and associated equipment for
damage. Any missing, corroded, deformed or non-load rated
component could significantly reduce the strength of the
installation, placement, or array. Any such condition
severely reduces the safety of the installation and should be
immediately corrected. Use only hardware which is rated for
the loading conditions of the installation and any possible
short-term unexpected overloading. Never exceed the rating
of the hardware or equipment. Consult a licensed, profes-
sional engineer when any doubt or questions arise regarding
a physical equipment installation.
TD-000170-00 rev.C
© Copyright 2004, QSC Audio Products, Inc.
QSC® is a registered trademark of QSC Audio Products, Inc.
“QSC” and the QSC logo are registered with the U.S. Patent and Trademark Office
1675 MacArthur Blvd., Costa Mesa, CA, 92626 USA
Main Number (714) 754-6175 Sales & Marketing (714) 957-7100 or toll free (USA only) (800) 854-4079
Customer Service(714) 957-7150 or toll free (USA only) (800) 772-2834
Connections
HF INPUT Terminals
The HF-63 has barrier strip screw terminals that accept up to #10 AWG (5.3mm 2) stranded loudspeaker wire. Connect the amplifier’s
high frequency output signal to the loudspeaker’s HF INPUT terminals. Observe proper polarity; amplifier’s + signal to loudspeaker +
HF INPUT, amplifier’s - signal to loudspeaker - HF INPUT. Use the largest wire size and shortest wire length for the application.
NOTE! Maintain proper loudspeaker connection polarity throughout the entire system for maximum performance.
Do not apply full range signal to the HF-63! There is no crossover in the HF-63, only an equalization and protection
network. All required signal processing must be done before the signal is applied to the HF-63.
HF OUTPUT Terminals
The HF OUTPUT terminals are factory-connected to the compression driver. These terminals should ONLY be connected to the HF-63’s
compression driver.
Compression
Driver
Amplifier
Processed high
frequency pro-
gram signal
QSC DCM or other
active crossover
Note: The HF-63 connection enclosure
does not contain a crossover network!
Ensure only high frequency signal is
applied to HF INPUT terminals or com-
pression driver damage will occur.
HF-63 connec-
tion terminals
HF-63 Specifications (subject to change without notice)
Frequency Range: 400 - 16k Hz (-6 dB, full space)
Nominal Coverage: 90° horizontal X +15 to -35° vertical (50° total, adjustable mount provides for vertical plane adjustments. The hori-
zontal plane can be adjusted by altering mounting position on the low frequency enclosure before tightening bolts.
DI: 9.0 dB (600 to 16,000 Hertz average)
Q: 8.0 (600 to 16,000 Hertz average)
Maximum Output: 131.5 dB SPL calculated peak, 1 meter, half space.
Impedance: 8 ohms nominal
9.0 ohms minimum at 8,000 Hertz
30 ohms maximum at 475 Hertz
Maximum Input Power: 50 watts rms (8 hours of 6 dB crest factor pink noise, 1,000 to 10,000 Hertz)
60 watts rms (2 hours of 6 dB crest factor pink noise, 1,000 - 10,000 Hertz, AES method)
Sensitivity: 107.5 dB half space, 1 watt, 1 meter
Crossover Frequency: 1,000 Hertz or higher, 24 dB per octave
Connectors: Barrier strip screw terminals accept up to #10 AWG stranded wire. Four terminals: (two HF INPUT and two post
compensation HF OUTPUT). HF OUTPUT factory wired to compression driver.
Transducers: 1.5” (38mm) exit, 2.5” (63.5mm) titanium diaphragm compression driver.
Mounting Hardware: Attaches to top of the low frequency cabinet using three 5/16”-18 x 3/4” long bolts.
Size: 30” wide X 16” high X 20” deep (762mm X 406mm X 508mm)
Weight: 50 lbs. (shipping), 40 lbs. (net), 22.7/18.4 kilograms
SPL and Impedance vs. Frequency
SPL (dB)
Frequency (Hertz)
Impedance (Ohms)
Impedance
SPL

Produktspecifikationer

Varumärke: QSC
Kategori: högtalare
Modell: HF-63

Behöver du hjälp?

Om du behöver hjälp med QSC HF-63 ställ en fråga nedan och andra användare kommer att svara dig


högtalare QSC Manualer

QSC

QSC Wideline 10 WL2102-w Bruksanvisning

8 Januari 2025
QSC

QSC AD-C6T-LPZB Bruksanvisning

7 Januari 2025
QSC

QSC AD-C6T-ZB Bruksanvisning

7 Januari 2025
QSC

QSC AD-C4T-LPZB Bruksanvisning

7 Januari 2025
QSC

QSC AD-C4T-ZB Bruksanvisning

7 Januari 2025
QSC

QSC HF-75BX1 Bruksanvisning

7 Januari 2025
QSC

QSC SC-323 Bruksanvisning

7 Januari 2025
QSC

QSC HF-63 Bruksanvisning

7 Januari 2025
QSC

QSC SC-322 Bruksanvisning

7 Januari 2025
QSC

QSC SR-110B Bruksanvisning

7 Januari 2025

högtalare Manualer

Nyaste högtalare Manualer

Klipsch

Klipsch ProMedia 2.1 Wireless Bruksanvisning

8 Januari 2025
Polk

Polk F/X 1000 Bruksanvisning

8 Januari 2025
RCF

RCF HDL 36-AS Bruksanvisning

8 Januari 2025
Anchor Audio

Anchor Audio MEGA-DP DUAL/EM/CM Bruksanvisning

8 Januari 2025
IDance

IDance Cuty Cat Bruksanvisning

8 Januari 2025
Omnitronic

Omnitronic DX-2522 Bruksanvisning

8 Januari 2025
Monacor

Monacor TXA-1022CD Bruksanvisning

8 Januari 2025
Magnavox

Magnavox MSB2600 Bruksanvisning

8 Januari 2025
Magnavox

Magnavox MSB5300 Bruksanvisning

8 Januari 2025
Magnavox

Magnavox MSB5305 Bruksanvisning

8 Januari 2025