QSC NM-T1 Bruksanvisning

QSC Inte kategoriserad NM-T1

Läs nedan 📖 manual på svenska för QSC NM-T1 (6 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/6
™
Hardware User Manual
NM-T1
Tabletop Conference Microphone
®
TD-001639-01-A
*TD-001639-01*
2
The lightning flash with arrowhead symbol in a triangle alerts the user to the presence of uninsulated dangerous voltage within the
product’s enclosure that may constitute a risk of electric shock to humans.
The exclamation point within a triangle alerts the user to important safety, operating, and maintenance instructions in this manual.
WARNING!: TO PREVENT FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.
1. Read, follow, and keep these instructions.
2. Heed all warnings.
3. Do not use this apparatus near water.
4. Refer to the “Cleaning” section for product cleaning requirements.
5. Do not install near heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
6. Only use attachments/accessories specified by the manufacturer.
7. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
when the power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate normally, or has been dropped.
8. Do not use this apparatus in or near water or liquids.
9. Do not submerge the apparatus in water or liquids.
10. Do not use any aerosol spray, cleaner, disinfectant or fumigant on, near or into the apparatus.
11. Adhere to all applicable, local codes.
12. Consult a licensed, professional engineer when any doubt or questions arise regarding a physical equipment installation.
Maintenance and Repair
WARNING: Advanced technology, e.g., the use of modern materials and powerful electronics requires specially adapted
maintenance and repair methods. To avoid a danger of subsequent damage to the apparatus, injuries to persons and/or the creation of
additional safety hazards, all maintenance or repair work on the apparatus should be performed only by a QSC authorized service station
or an authorized QSC international distributor. QSC is not responsible for any injury, harm or related damages arising from any failure of
the customer, owner or user of the apparatus to facilitate those repairs.
IMPORTANT! PoE Power Input – PoE Type 1 Class 2 required. See “Connections and Controls”.
Specifications and Dimensions
Product specifications and dimension drawings for the NM-T1 can be found online at www.qsc.com.
IMPORTANT SAFETY INSTRUCTIONS
EXPLANATION OF TERMS AND SYMBOLS
The term “WARNING” indicates instructions regarding personal safety. Failure to follow them may result in bodily injury or death.
The term “ ” indicates instructions regarding possible damage to physical equipment. Failure to follow them may result in CAUTION
equipment damage to equipment that may not be covered under the warranty.
The term “IMPORTANT” indicates instructions or information that are vital to the successful completion of theprocedure.
The term “ ” indicates additional useful information.NOTE
3
Cleaning
WARNING: Liquids entering the housing may damage the internal electronics. Keep liquids away and do not use any solvents or
chemicals to clean this product.
The NM-T1 grille may collect dust and small debris over time. Use only a solvent-free damp cloth or small vacuum intended for use with
electronics to clean the NM-T1control ring and grille. The vacuum should be used with a soft bristle attachment to minimize the force of air
drawn directly through the microphone grille. Do not use compressed air to clean the NM-T1.
FCC Statement
: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of NOTE
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help
Environmental
• Expected Product Life Cycle: 10 years
• Storage Temperature Range: -20°C to +70°C
• Relative Humidity: 5 to 85% RH, non-condensing
RoHS Statement
The QSC Q-SYS NM-T1 is in compliance with European Directive 2011/65/EU – Restriction of Hazardous Substances (RoHS2).
The QSC Q-SYS NM-T1 is in compliance with “China RoHS” directives per GB/T 26572. The following chart is provided for product use in
China and its territories:
QSC Q-SYS NM-T1
部件名称
(Part Name)
有害物质
(Hazardous Substances)
铅
(Pb)
汞
(Hg)
镉
(Cd)
六价铬
(Cr(vi))
多溴联苯
(PBB)
多溴二苯醚
(PBDE)
电路板组件
(PCB Assemblies)
X O O O O O
机壳装配件
(Chassis Assemblies)
X O O O O O
本表格依据 SJ/T 11364 的规定编制。
O: 表示该有害物质在该部件所有均质材料中的含量均在 GB/T 26572 规定的限量要求以下。
X: 表示该有害物质至少在该部件的某一均质材料中的含量超出 GB/T 26572 规定的限量要求。
（目前由于技术或经济的原因暂时无法实现替代或减量化。）
This table is prepared following the requirement of SJ/T 11364.
O: Indicates that the concentration of the substance in all homogeneous materials of the part is below the relevant
threshold specified in GB/T 26572.
X: Indicates that the concentration of the substance in at least one of all homogeneous materials of the part is above the
relevant threshold specified in GB/T 26572.
(Replacement and reduction of content cannot be achieved currently because of the technical or economic reason.)

Produktspecifikationer

Varumärke: QSC
Kategori: Inte kategoriserad
Modell: NM-T1

Behöver du hjälp?

Om du behöver hjälp med QSC NM-T1 ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad QSC Manualer

QSC

QSC CX204V Bruksanvisning

19 Oktober 2024
QSC

QSC CX902 Bruksanvisning

18 Oktober 2024
QSC

QSC CX-Qn 8K4 Bruksanvisning

2 Oktober 2024
QSC

QSC DPA-4K4Qn Bruksanvisning

29 September 2024
QSC

QSC QIO-ML4i Bruksanvisning

27 September 2024
QSC

QSC AcousticDesign YS8T Bruksanvisning

26 September 2024
QSC

QSC DCA 1622 Bruksanvisning

21 September 2024
QSC

QSC Cinema Core 110c Bruksanvisning

20 September 2024
QSC

QSC Core 510i Bruksanvisning

28 Augusti 2024
QSC

QSC CXD4.3Q Bruksanvisning

25 Augusti 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024