QTX QR5B Bruksanvisning

Läs nedan 📖 manual på svenska för QTX QR5B (4 sidor) i kategorin högtalare. Denna guide var användbar för 10 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/4
QR5A
5.25” ACTIVE STEREO SPEAKER SET
Item ref: 178.200UK, 178.201UK
User Manual
Version 2.1
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
178.200UK, 178.201UK User Manual
Introduction
Thank you for choosing the 5 active speaker set. Please read this manual prior to use to avoid damage to QR
the item. These compact, self-contained stereo speaker sets are designed to deliver high quality near-field or
perimeter coverage for various monitoring and installed sound applications.
Contents
Please take care when unpacking this product. Inspect for any damage and ensure you have the following
components:
QR5 active speaker with built-in amplifier
QR5 passive satellite speaker
2 x wall-mounting brackets with screw caps
Satellite speaker wire
Safety Conventions
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC ELECTRIQUE NE
PAS OUVRIR
This symbol indicates that dangerous voltage constituting a risk of electric shock is
present within this unit
This symbol indicates that there are important operating and maintenance instructions
in the literature accompanying this unit.
Warning
To prevent the risk of fire or electric shock, do not expose this appliance to rain or moisture.
To prevent electric shock do not remove the rear cover.
No user serviceable parts inside. Refer servicing to qualified service personnel.
Safety
Prior to connecting to the mains, ensure that the supply voltage is correct.
Avoid ingress of water or particles into the enclosure.
Placement
Keep the unit out of direct sunlight and away from heat sources.
Keep the unit away from moisture or dusty environments.
Allow adequate space for cooling at the rear of the active speaker unit
Cleani ng
Use a soft cloth with a neutral detergent to clean the cabinet, panel and controls. Do not use solvents.
178.200UK, 178.201UK User Manual
Panel layout
Setting up
For near-field or desktop use, space speakers apart for adequate stereo separation depending on
proximity to the listener. For installations using the supplied wall-mount brackets, attach the brackets
to a solid surface using fixings which are sufficient to hold the weight of the active speaker. Take
care to mount the active unit close enough to a mains outlet for the supplied adaptor to reach.
Fix the speaker units to the brackets at top and bottom using the supplied screw caps. Each can be
rotated to aim the general direction of sound output.
If the speakers are mounted at height or where falling objects may be hazardous, it is advised to
attach a secondary means of support (e.g. drop-wire or chain)
Operation
Link the satellite speaker to the spring terminals on the powered speaker (5) using the supplied
speaker lead (connecting red to red and black to black)
With the rotary VOLUME (3) control set to minimum and TREBLE and BASS controls (1, 2) set to the
vertical (12 o’clock) position, connect the attached mains lead (7) to a suitable mains outlet. Connect
the source signal into the active unit via the L+R RCA connectors (4 Switch the power on (6) and ).
gradually turn the rotary VOLUME control clockwise and increase volume level to the required
amount.
Adjust TREBLE (2) and BASS (1) controls to provide the desired tonal response.
The centre position is unaffected, to the left is cut and to the right is boost.
Turn down the rotary VOLUME control before switching off.
1
TREBLE EQ control
2
BASS EQ control
3
VOLUME control
4
Signal input (L+R RCA)
5
Satellite speaker connection (spring terminals)
6
Power on/off switch
7
Mains power lead
8
Mains fuse holder

Produktspecifikationer

Varumärke: QTX
Kategori: högtalare
Modell: QR5B

Behöver du hjälp?

Om du behöver hjälp med QTX QR5B ställ en fråga nedan och andra användare kommer att svara dig




högtalare QTX Manualer

högtalare Manualer

Nyaste högtalare Manualer