Quoizel PCLS1722C Bruksanvisning

Quoizel Lättnad PCLS1722C

Läs nedan 📖 manual på svenska för Quoizel PCLS1722C (2 sidor) i kategorin Lättnad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
Package Contents
1of2
Assembly Instruction Sheet #IS-PCLS1722C
For Style PCLS1722C
CFixture Body
x 1
Crossbar
x 1
A
Mounting Screw
x 2
B
Please go to for product cleaning tips. Go to the selection.
Flathead screwdriver, Phillips screwdriver, pliers, wire cutters, wire strippers, electrical tape, safety glasses.
Integrated LED 22W
www.quoizel.com Care + Maintenance
Tools Required:
Light Source:
Estimated Assembly Time:
Preparation:
20-30 minutes
Identify and inspect all parts before beginning installation. Check package content list and diagrams below to be sure all parts are
present. If any parts are missing or damaged, do not attempt to assemble, install, or operate the fixture. Contact customer service for replacement
parts.
Compatible Dimmer Switches: Lutron DVELV-300Por Lutron SELV-300P.
Warnings and Cautions
Turn off electricity at circuit breaker or main fuse box before installation. Consult a licensed electrician if in doubt.
These instructions are provided for your safety. It is very important you read them completely before installing the fixture. We strongly
recommend that a licensed, professional electrician perform the installation.
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
2017 QuoizelInc.
G
G
G
GGND
ND
ND
NDND
2.4m m
2.4m m
2.4m m
2.4m m2.4m m
13 Ga
13
13
13
13 Ga
Ga
Ga
Ga
STEP 1 - Adjust Lamp Tube
A. By holding the metal part of the lamp tube, carefully rotate lamp
tubes anti-clockwise to your desired directions.
Note: The shortest lamp tube against the ceiling canopy is the fixed
lamp tube, which cannot be rotated.
ReleasedDate:2017-08-25
Fixed Lamp Tube
(Shortest one against
the ceiling canopy)
Fixed Lamp Tube
(Shortest one against
the ceiling canopy)
FRONT VIEW BOTTOM VIEW
Figure 1
ROTATE
ROTATE
ROTATE
ROTATE
Metal
STEP 2 Attach Crossbar to Outlet
Box
-
A. Attach the Crossbar (A) to Outlet
Box and secure by threading Outlet
Box Screws (not supplied) into the
Mounting Holes on the Outlet Box.
Tighten until snug.
A
Figure 2
Outlet
Box
Outlet Box
Screw
STEP 4 -Attach Ceiling Canopy to Crossbar
A. Line up the holes on the side of the ceiling canopy to the mounting
holes on the Crossbar (A). Secure them with Mounting Screws (B).
Tighten until sung.
Your fixture is now assembled and ready to use. Enjoy!
A
B Figure 4
Ceiling
Canopy
STEP 3 - Wire Connections
A. Wrap bare or green ground wire around green ground screw on the
crossbar, no less than 2 inches from the end of the wire. Tighten the
green ground screw.
B. Use standard wire connectors (not included) to make all wire
connections. Twist connectors until wires are tightly joined together.
Wrap each connection with approved electrical tape and carefully
stuff all the connected wires into the Outlet Box.
Figure 3
Green Ground Screw
on the Crossbar
White wire
from outlet box White wire
from fixture
Black wire from
outlet box (or Red)
Black wire
from fixture
Bare, or Green
Ground wire
from outlet box
Ground wire
from Fixture
2of2
Thank you for purchasing a Quoizel product.
Need assistance with parts or assembly? Call Quoizel customer service at 1-800-645-3184
or visit us on-line at www.quoizel.com
2017 QuoizelInc. Released Date:2017-08-25
PCLS1722C
FINISH: POLISHED CHROME
NOTE: ALL DIMENSIONS ARE ROUNDED UP TO THE NEAREST 1/4"
G
G
G
GG
ND
ND
ND
NDND
2.4m m
2.4m m
2.4m m
2.4m m2.4m m
13 Ga
13
13
13
13 Ga
Ga
Ga
Ga
22.25” Dia.
6” Dia.
7.75” Dia.
8.5

Produktspecifikationer

Varumärke: Quoizel
Kategori: Lättnad
Modell: PCLS1722C

Behöver du hjälp?

Om du behöver hjälp med Quoizel PCLS1722C ställ en fråga nedan och andra användare kommer att svara dig




Lättnad Quoizel Manualer

Lättnad Manualer

Nyaste Lättnad Manualer