RCBS AMMOMASTER-2 Bruksanvisning

RCBS Inte kategoriserad AMMOMASTER-2

Läs nedan 📖 manual på svenska för RCBS AMMOMASTER-2 (8 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/8
AMMOMASTER-2 SINGLE
STAGE RELOADING PRESS
PRODUCT INSTRUCTIONS
- 2 -
WARNING
Before using the RCBS AmmoMaster-2, read these instructions carefully to fully learn how to safely operate the related
reloading equipment. Failure to properly operate the related reloading equipment can result in severe personal injury
and/or equipment damage.
If you have any questions while assembling or operating this tool,
Call us at 1-800-533-5000 or 1-530-533-5191
Monday – Thursday 6:30 am – 4:00 pm Pacific Time
(hours may vary)
Or email us at rcbs.tech@atk.com
This instruction manual contains specific safety and operating information. It should be considered a permanent part of
your reloading equipment and remain with the equipment at all times for easy reference.
LIMITED LIFETIME WARRANTY
Your AmmoMaster-2 is warranted to be free from
defects in material or workmanship for as long as the
original owner owns it. This warranty is extended only to
the original consumer purchaser. All RCBS products are
intended for non-commercial use by hobbyists. Any
other use of these products will void the warranty.
Should you believe that your AmmoMaster-2 is defective
in material or workmanship, you must return it to
Ammunition Accessories Inc. through its Oroville
operation (hereinafter “Oroville Operations”) postage
paid for evaluation. If defective, the product will be
repaired or replaced at Oroville Operations’ option, at no
charge.
Send a dated proof of purchase to Oroville Operations
for return shipping and handling, along with the
AmmoMaster-2 to:
Ammunition Accessories Inc.,
Oroville Operations
605 Oro Dam Blvd East
Oroville, California 95965
Warranty services cannot be provided without meeting
the above requirements.
THIS LIMITED LIFETIME WARRANTY DOES NOT
COVER DEFECTS OR DAMAGE RESULTING FROM:
CARELESSNESS, MISUSE, COMMERCIAL USE,
ABUSE, IMPROPER INSTALLATION, MODIFICATION,
OR NORMAL WEAR AND TEAR. THE IMPLIED
WARRANTIES OF MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE ARE LIMITED TO
THE DURATION OF THIS LIMITED LIFETIME
WARRANTY. OROVILLE OPERATIONS IS NOT
LIABLE FOR DAMAGES IN EXCESS OF THE
PURCHASE PRICE OF THE PRODUCT AND UNDER
NO CIRCUMSTANCES SHALL OROVILLE OPERA-
TIONS BE LIABLE FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES. HOWEVER, SOME STATES
DO NOT ALLOW LIMITATIONS ON INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE
LIMITATION OR EXCLUSION MAY NOT APPLY TO
YOU.
The above warranty provides the sole and exclusive
warranty available to the customer in the event of a
defect in material or workmanship in the reloading press.
This warranty gives you specific legal rights, and you
may also have other rights which vary from State to
State.
SAFETY
Reloading is an enjoyable and rewarding hobby that can
be conducted safely. But, as with any hobby,
carelessness or negligence can make reloading
hazardous. This product has been designed from the
beginning with the user's safety in mind. When
reloading, safety rules must be followed. By observing
these rules, the chance of a hazardous occurrence
causing personal injury or property damage is
minimized.
GENERAL
• Use all equipment as the manufacturer recommends.
Study the instructions carefully and become
thoroughly familiar with the operation of the product. If
you do not have written instructions, request a copy
from the equipment manufacturer.
• Do not take short cuts. Attempting to bypass
established procedures is an invitation to an accident.
• Observe "good housekeeping" in the reloading area.
Keep tools and components neat, clean and orderly.
Promptly and completely clean up primer and powder
spills.
• Reload only when you can give your undivided
attention. Do not reload when fatigued or ill, or under
the influence of medications or alcohol.
• Develop a reloading routine to avoid mistakes which
may prove hazardous. Do not rush - load at a leisurely
pace.
• Always wear adequate eye protection to protect your
eyes from flying particles. You assume unnecessary
risk when reloading without wearing safety glasses.
LOADING DATA
• Use only laboratory tested reloading data. We highly
recommend the current SPEER Reloading Manual.
• OBSERVE ALL WARNINGS ABOUT THE USE OF
MAXIMUM LISTED LOADS
WARNING/CAUTION
PRIMERS AND POWDER
• Store primers and powder beyond the reach of
children and away from heat, dampness, open flames
and electrical equipment. Avoid areas where static
electricity is evident.
• DO NOT use primers of unknown identity.
• Dispose of unknown primers in accordance with
applicable regulations.
• Keep primers in the original factory container until
ready to use. Return unused primers to the same
factory packaging for safety and to preserve their
identity. Primer packaging is designed to provide safe
storage.
• DO NOT store primers in bulk. The blast of just a few
hundred primers is sufficient to cause serious injury to
anyone nearby.
• DO NOT force primers. Use care in handling primers.
• DO NOT have more than one can of powder on the
bench at one time. Powder cans should be stored
away from the bench to avoid picking up the wrong
one.
• DO NOT use any powder unless its identity is
positively known. The only positive identification is the
manufacturer's label on the original canister. Discard
all mixed powders and those of uncertain identity.
• DO NOT attempt to prime military cartridge cases with
crimped/staked primer pockets until the crimp/staking
has been removed with a reamer or by swaging.
Attempting to seat primers into staked/crimped primer
pockets can result in primer detonation, which can
cause serious personal injury.
• DO NOT decap live primers. This is extremely
dangerous and can result in primer detonation
causing serious personal injury.
• If you use a powder measure, replace the lids on both
the powder hopper and powder can after the powder
hopper has been filled.
• When using a powder measure, settle the powder in
the powder hopper before charging any cases. Throw
and check the weight of at least ten charges. This will
assure you that the correct powder charge is being
thrown.
• When you finish a reloading session, pour any
remaining powder back into its original factory
container. This will preserve the identity and shelf life
of the powder.
• DO NOT smoke while reloading.
RECORD KEEPING
• Keep complete records of reloads. Apply a descriptive
label to each box showing the date produced, and the
primer, powder and bullet used. Labels for this
purpose are packed with SPEER bullets.
• Never attempt to guess at the identity of your
ammunition.
Because RCBS has no control over the choice of components, the manner in which they are assembled, the use of this
product, or the firearms in which the resulting ammunition may be used, we assume no responsibility, expressed or
implied, for the use of ammunition reloaded with this product.
GENERAL INFORMATION
The single-stage AmmoMaster-2 is a large, strong press that provides the handloader with all the clearance, strength, and
leverage to reload all rifle and pistol calibers. With the RCBS legendary compound leverage system and massive 1 1/2”
diameter ram, the AmmoMaster-2 will form cases or swage bullets. The 7/8”-14 top thread allows the use of standard
reloading dies and many RCBS accessories. With 7” between the top plate and the main press frame, the AmmoMaster-2
will easily handle the longest standard cartridge including the .50 BMG(additional products required).
UNPACKING
Unpack the press carefully and look for the items listed below. Refer to the parts list for identification.
• Press
• Handle and handle nut
• Primer catcher
• Ram Priming Unit

Produktspecifikationer

Varumärke: RCBS
Kategori: Inte kategoriserad
Modell: AMMOMASTER-2

Behöver du hjälp?

Om du behöver hjälp med RCBS AMMOMASTER-2 ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad RCBS Manualer

RCBS

RCBS Rock Chucker Supreme Auto Prime Bruksanvisning

22 September 2024
RCBS

RCBS Trim Pro 2 Bruksanvisning

19 September 2024
RCBS

RCBS Lead Thermometer Bruksanvisning

17 September 2024
RCBS

RCBS Powder Trickler-2 Bruksanvisning

17 September 2024
RCBS

RCBS Case Activated Linkage Kit Bruksanvisning

17 September 2024
RCBS

RCBS Lube-A-Matic 2 Bruksanvisning

16 September 2024
RCBS

RCBS M1000 Bruksanvisning

14 September 2024
RCBS

RCBS Cowboy Dies Bruksanvisning

14 September 2024
RCBS

RCBS Rangemaster 2000 Bruksanvisning

14 September 2024
RCBS

RCBS Pro Melt 2 Bruksanvisning

14 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024