Rikon 70-1824VSR Bruksanvisning

Rikon Inte kategoriserad 70-1824VSR

Läs nedan 📖 manual på svenska för Rikon 70-1824VSR (40 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/40

www.rikontools.com

70-1824VSRM3

18” x 24” VSR Lathes

Operator’s Manual

Serial Number: _________________________ Date of purchase: _________________________

For technical support or parts questions, email techsupport@rikontools.com or call toll free at (877) 884-5167

Record the serial number and date of purchase in your manual for future reference.

The serial number can be found on the specication label on the rear of your machine.

1.75HP, 115V and 2.5HP, 230V Models

TABLE OF CONTENTS

SPECIFICATIONS # 70-1824VSR & 70-1824VSR2

NOTE: The specications, photographs, drawings and information in this manual represent the current model when the manual was

prepared. Changes and improvements may be made at any time, with no obligation on the part of RIKON Power Tools, Inc. to modify

previously delivered units. Reasonable care has been taken to ensure that the information in this manual is correct, to provide you with

the guidelines for the proper safety, assembly and operation of this machine.

Specications..................................................................................................................... 2

Safety Instructions ........................................................................................................ 3 - 7

Electricals & Wiring Diagram .............................................................................. 5, 6, 24 & 25

Getting To Know Your Machine .............................................................................................. 8

Contents of Package ................................................................................................. 8 & 9

Installation ..................................................................................................................... 9

Assembly .................................................................................................................. 10 - 12

Operation .................................................................................................................. 13 - 17

Adjustments............................................................................................................... 18 - 22

Maintenance .................................................................................................................... 23

Troubleshooting ....................................................................................... 26 - 28

Notes ......................................................................................................................... 28

Parts Diagrams & Parts Lists ................................................................................. 29 - 36

Accessories ............................................................................................................ 37 & 38

Warranty .......................................................................................................................... 39

Motor TEFC ....................................................... 1.75 HP ..........................2.5 HP

Volts, Phase (Input/Output) ........................ 115 V, 3/1 Ph ................. 230 V, 3 Ph

Amps, Hertz ............................................. 16 A, 50/60 Hz .............14 A, 50/60 Hz

Motor Speed (no load) ................................................................ 1,720 RPM

Recommended Breaker Size ........................................................... 20 Amp

Spindle Rotation .............................................................. Forward/Reverse

Swing Over Bed ....................................................................... 18”(457 mm)

Swing Over Tool Rest Base............................................... 13-3/4” (350 mm)

Distance Between Centers...................................................... 24” (610 mm)

Speeds ................................................................. Variable 50 - 3,850 RPM

Speed Ranges (3) .......................... 50 - 900; 100 - 1,850; 200 - 3,850 RPM

Spindle Nose Threading.....................................................1-1/4” x 8 TPI RH

Headstock Taper .................................................................................. MT-2

Tailstock Taper ..................................................................................... MT-2

Hole Through Drive Spindle ..................................................... 3/8” (10 mm)

Hole Through Tailstock ............................................................ 3/8” (10 mm)

Tailstock RAM Travel Quill .................................................. 4-1/2" (115 mm)

Number of Indexing Positions.............................................. 24 (15 Degrees)

Headstock Rotation .................................................................. 180 Degrees

Tool Rest Post Diameter ...........................................................1” (25.4 mm)

Spindle to Floor Distance ............................................. 43-5/16“ (1100 mm)

Overall Height ................................................................. 47-3/8” (1205 mm)

Overall Length ...................................................................... 63” (1600 mm)

Overall Width .................................................................... 24-3/8” (620 mm)

Outboard Swing Over Bed Extension (optional) ............... 27-1/2” (700 mm)

Outboard Swing Over Tool Rest Base .............................. 23-1/2” (600 mm)

Outboard Swing 90° Forward Over Stand Leg ...................... 44” (1118 mm)

Base / Legs Size (LxW) ........................ 47-1/4” x 24-3/8” (1120 x 620 mm)

Net Weight ........................................................................ 373 lbs (169 kgs)

SAFETY SYMBOLS

IMPORTANT! Safety is the single most important consideration in the operation of this equipment. The following

instructions must be followed at all times. Failure to follow all instructions listed below may result in electric shock,

re, and/or serious personal injury.

There are certain applications for which this tool was designed. We strongly recommend that this tool not be modied

and/or used for any other application other than that for which it was designed. If you have any questions about its

application, do not use the tool until you have contacted us and we have advised you.

SAFETY INSTRUCTIONS

GENERAL SAFETY

KNOW YOUR POWER TOOL. Read the owner’s manual

carefully. Learn the tool’s applications, work capabilities,

and its specic potential hazards.

BEFORE USING YOUR MACHINE

To avoid serious injury and damage to the tool, read and

follow all of the Safety and Operating Instructions before

operating the machine.

1. Some dust created by using power

tools contains chemicals known to the State of California

to cause cancer, birth defects, or other reproductive harm.

Some examples of these chemicals are:

• Lead from lead-based paints.

• Crystalline silica from bricks, cement, and other

• masonry products.

• Arsenic and chromium from chemically treated lumber.

Your risk from these exposures varies, depending on how

often you do this type of work. To reduce your exposure to

these chemicals: work in a well ventilated area and work

with approved safety equipment, such as those dust masks

that are specially designed to lter out microscopic

particles.

2. the entire Owner’s Manual. how to use READ LEARN

the tool for its intended applications.

3. If the tool is supplied with a 3 GROUND ALL TOOLS.

prong plug, it must be plugged into a 3-contact electrical

receptacle. The 3rd prong is used to ground the tool and

provide protection against accidental electric shock. DO

NOT remove the 3rd prong. See Grounding Instructions

on the following pages.

4. AVOID A DANGEROUS WORKING ENVIRONMENT.

DO NOT use electrical tools in a damp environment or

expose them to rain.

5. use electrical tools in the presence of DO NOT

ammable liquids or gases.

6. ALWAYS keep the work area clean, well lit, and

organized. work in an environment with oor DO NOT

surfaces that are slippery from debris, grease, and wax.

7. KEEP VISITORS AND CHILDREN AWAY. DO NOT

permit people to be in the immediate work area,

especially when the electrical tool is operating.

8. to perform an operation DO NOT FORCE THE TOOL

for which it was not designed. It will do a safer and

higher quality job by only performing operations for

which the tool was intended.

9. wear loose WEAR PROPER CLOTHING. DO NOT

clothing, gloves, neckties, or jewelry. These items can

get caught in the machine during operations and pull the

operator into the moving parts. The user must wear a

protective cover on their hair, if the hair is long, to

prevent it from contacting any moving parts.

10. CHILDPROOF THE WORKSHOP AREA by

removing switch keys, unplugging tools from the

electrical receptacles, and using padlocks.

11. ALWAYS UNPLUG THE TOOL FROM THE

ELECTRICAL RECEPTACLE when making adjust-

ments, changing parts or performing any maintenance.

SAFETY ALERT SYMBOL: Indicates DANGER, WARNING, or CAUTION. This symbol may be used

in conjunction with other symbols or pictographs.

Indicates an imminently hazardous situation, which, if not avoided, could result in death or

serious injury.

Indicates a potentially hazardous situation, which, if not avoided, could result in death or serious

injury.

Indicates a potentially hazardous situation, which, if not avoided, could result in minor or

moderate injury.

NOTICE: Shown without Safety Alert Symbol indicates a situation that may result in property damage.

Produktspecifikationer

Varumärke:	Rikon
Kategori:	Inte kategoriserad
Modell:	70-1824VSR
Färg på produkten:	Zwart
Förpackningens vikt:	9200 g
Förpackningens bredd:	820 mm
Djuppackning:	160 mm
Förpackningshöjd:	500 mm
Justerbar i höjdled:	Ja
Skärm diagonal:	27 "
Upplösning:	2560 x 1440 Pixels
Pekskärm:	Nee
Pixel densitet:	109 ppi
Original bildförhållande:	16:9
Betraktningsvinkel, horisontell:	178 °
Betraktningsvinkel, vertikal:	178 °
Medföljande kablar:	AC, DisplayPort
Färgnamn:	Raven black
Skärmform:	Flat
Typiskt kontrastförhållande:	1000:1
Garantikort:	Ja
Marknadspositionering:	Gamen
Antal HDMI-portar:	2
Monteringsalternativ för kabellås:	Ja
Kabellåsspårtyp:	Kensington
Inbyggda högtalare:	Ja
Genomsnittlig effekt:	6 W
Strömförbrukning (i standby):	0.5 W
Strömförbrukning (max):	50 W
Antal högtalare:	2
Certifiering:	Eyesafe® Certified 2.0\nTÜV Rheinland® Eye Comfort Certification\nTÜV Rheinland Low Blue Light (Hardware Solution)
Display, antal färger:	1,07 miljard kleuren
Strömförbrukning (när avstängd):	0.5 W
Maximal uppdateringshastighet:	165 Hz
High Dynamic Range (HDR)-teknologi:	DisplayHDR 400
HDR-stöd:	Ja
HD typ:	Quad HD
Ljudutgång:	Ja
HDMI:	Ja
HDMI-version:	2.1
Displayteknik:	LED
Respons tid:	4 ms
Pixelpitch:	0.233 x 0.233 mm
VESA montering:	Ja
Panelmonteringsgränssnitt:	100 x 100 mm
Rambredd (nederst):	22 mm
Rambredd (sida):	2 mm
Rambredd (överst):	2 mm
Antireflexskärm:	Ja
Hållbarhetscertifikat:	RoHS
Ljusstyrka (typiskt):	350 cd/m²
Kontrastförhållande (dynamisk):	3000000:1
Inbyggd kamera:	Nee
Djup (utan bas):	58.5 mm
Höjd (utan bas):	367.6 mm
Bredd (utan bas):	613.6 mm
Vikt (utan bas):	3900 g
Antal DisplayPorts:	1
Energiförbrukning (HDR) per 1000 timmar:	36 kWu
Energieffektivitetsklass (SDR):	F
Energiförbrukning (SDR) per 1000 timmar:	26 kWu
Energieffektivitetsklass (HDR):	G
Enhetsbredd (med stativ):	613.6 mm
Djupenhet (med stativ):	258.8 mm
Enhetshöjd (med stativ):	392.4 mm
Vikt (med stativ):	5800 g
AMD FreeSync:	Ja
NVIDIA G-SYNC:	Nee
Färgdjup:	10 Bit
Stöder Windows:	Windows 10, Windows 11
Typ av bakgrundsbelysning:	W-LED
Typ av mat:	Intern
Typ av panel:	IPS
Roterbar:	Ja
Horisontellt vridbar:	30 - 30 °
Hörlurarna avstängda:	Nee
Inbyggd USB-hubb:	Nee
Bildstorlek (horisontell):	596.7 mm
Bildstorlek (vertikal):	335.7 mm
Stativ ingår:	Ja
Kant fram:	Zwart
Fötter färg:	Zwart
sRGB-täckning (genomsnitt):	99 procent
Teknik för lågt blått ljus:	Ja
DisplayPort-version:	1.4
Gångjärn:	Ja
Pivothörn:	-90 - 90 °
Inklusive skruvar:	Ja
Gleurengamma DCI-P3:	90 procent
AMD FreeSync-typ:	FreeSync Premium
Skärmens ljusstyrka (topp):	400 cd/m²
Förbättrad kabelhantering:	Ja
AC-ingångsspänning:	100 - 240 V
AC-ingångsfrekvens:	50/60 Hz
Strömförbrukning (typiskt):	30 W
Tiltvinkelområde:	-5 - 22 °
Energieffektivitetsskala:	A tot G
DisplayPort-kabellängd:	1.8 m
Strömkabelns-längd:	1.5 m
lutningsjusteringar:	Ja
Svarstid (extrem):	0.5 ms
European Product Register for Energy Labeling (EPREL)-kod:	1656085