Roland TR-8 Bruksanvisning

Roland Inte kategoriserad TR-8

Läs nedan 📖 manual på svenska för Roland TR-8 (5 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/5
1
Contents of Ver. 1.50
Playing the SP-404A (or SP-404SX) from the TR-8
If you connect the TR-8 via MIDI to the SP-404A or SP-404SX
(subsequently called the “SP”), you can use operations on the TR-8 to
trigger sounds on the SP.
The order in which the TR-8’s INST select buttons are arranged ([BD],
[SD], ... , [RC] button) corresponds to the SP’s pads [1]–[11].
MEMO
It’s not possible to trigger the SP’s pad [12] from the TR-8.
1. Use a MIDI cable to connect the TR-8’s MIDI OUT connector
to the SP’s MIDI IN connector.
2. SP While holding down the [SHIFT] button (or [FUNC]
button), press pad [9] (MIDI CH).
3. SP Turn the [CTRL 3] knob to set the MIDI channel to “1.”
4. SP Press the [REC] button.
The SP’s MIDI channel (Pad Base Ch.) is set to “1.”
MEMO
MIDI channels 1 and 2 are used to trigger the SP from the TR-8.
In order to trigger the SP correctly, set the TR-8’s MIDI channel
(the MIDI channel used to trigger the TR-8’s internal sounds) to
something other than 1 or 2 (default: channel 10).
5. SP While holding down the [SHIFT] button (or [FUNC]
button), press pad [10] (MIDI SYNC).
6. SP Turn the [CTRL 3] knob to set the MIDI
synchronization mode to “tnP” (Tempo Sync) or “oFF” (Sync
OFF).
7. SP Press the [REC] button.
The SP’s MIDI synchronization mode is set to “tnP” (Tempo Sync) or
“oFF” (Sync OFF).
8. TR-8 Turn on the power, and press the DRUM SELECT
[INST] button.
9. TR-8 Press pad [16] to select which sound module is
played when you press the [BD]–[RC] buttons.
The color changes each time you press pad [16].
Pad [16]
status Sound module that is played
Lit white The TR-8’s internal sounds are played.
Blinking
yellow
The TR-8’s internal sounds and the SP’s sounds are played
simultaneously.
Blinking
blue The SP’s internal sounds are played.
MEMO
When the pad [16] color is yellow or blue, you can turn the
[TEMPO] knob to select the sample bank (or pattern bank) that is
played by the SP.
Support for USB Audio Sample Rates 44.1/48/96 kHz
Windows users
1. Access the control panel as follows.
1. Click the [Start] button.
2. Click the [TR-8] icon.
The control panel appears.
2. From the SAMPLE RATE parameter, select the sample rate.
Copyright © 2014 ROLAND CORPORATION
04
TR-8 Update
TR-8 Update
2
Mac users
1. In the Finder menu item “Move,” click “Application.”
The application folder appears.
2. Double-click the [Utility] folder.
3. Double-click the [Audio MIDI Settings] icon.
The “Audio Devices” screen appears.
If the audio devices screen does not appear, choose the Audio MIDI
Settings menu item “Windows” and click “Show Audio Devices.”
4. From the Format parameter, select the sample rate.
TR-8 Update
3
Contents of Ver. 1.20
Additional sounds
The sounds of the TR-606 have been added.
* These sounds are added only if the 7X7-TR8 Drum Machine
Expansion is installed.
Switching the cymbal parameter operating mode
We’ve added a HIHAT Link mode that lets you operate the CH (closed
hi-hat) and OH (open hi-hat) parameters simultaneously.
This mode makes it possible to adjust the master tuning of cymbal-
type sounds.
* (TR-606/TR-808 sounds only)
1. While holding down the [PTN SELECT] button, turn on the
power.
2. Press pad [8] to switch the operating mode.
ON (lit)
Use the CH [TUNE] knob to simultaneously adjust the tuning
of CH and OH. The CH [LEVEL] fader simultaneously adjusts
the volume of CH and OH.
The OH [TUNE] knob adjusts the master tuning of cymbal-
type sounds (TR-606/TR-808 sounds only).
OFF (unlit) The CH/OH tuning and volume are adjusted by each
controller (default setting).
Fixed a problem when the sequencer is running
5We xed a problem that had caused notes to sometimes be
unintentionally delayed.
5We xed a problem that had caused data diering from that
listed in the MIDI implementation chart to be output when using
alternate sounds.
Fixed a problem in INST PLAY
We xed a problem that had caused the wrong MIDI data to be
output when the ROLL button is operated while muted.
Fixed a problem in SIDE CHAIN operation
We xed a problem that had caused the SD (snare drum) COMP to
stop working when the SIDE CHAIN type is set to 4 or 7.
Contents of Ver. 1.12
Switching the pattern sequencer’s operating mode
Now you can change the operating mode of the pattern sequencer.
* Until Ver. 1.11, the sequencer operated with timing that models
the TR-808.
1. While holding down the [PTN SELECT] button, turn on the
power.
2. Press pad [7] to switch the operating mode.
ON (lit) The pattern sequencer operates with precise timing.
OFF (unlit) The pattern sequencer operates with timing that models the
TR-808. (Default)
Fixed a problem with TR-REC
We xed the problem in which it became impossible to set LAST
STEP to “1.”
Contents of Ver. 1.11
Adding an accent to an instrument’s performance
5When using INST-PLAY (realtime performance) or INST-REC (realtime
recording), you can hold down the ACCENT [STEP] button and press a
pad to add an accent to the specied step.
To adjust the volume of the accent, use the ACCENT [LEVEL] knob in
the same way as for TR-REC (step recording).
5INST-REC (realtime recording) now lets you record an accent at the
step location that you play.
Color indication of the instrument’s sound (tone)
When selecting a tone, the color that is shown when you press a pad
now distinguishes the tone.
TR-808 type Pink
TR-909 type Yellow
Fixed a problem with ASSIGNABLE OUT
We have xed a problem that had caused the eect sound to be sent
to MIX OUT when an instrument with reverb or delay applied was
assigned to ASSIGNABLE OUT.
* Properly speaking, an instrument assigned to ASSIGNABLE OUT
should not be output from MIX OUT.

Produktspecifikationer

Varumärke: Roland
Kategori: Inte kategoriserad
Modell: TR-8

Behöver du hjälp?

Om du behöver hjälp med Roland TR-8 ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Roland Manualer

Roland

Roland SD-20 Bruksanvisning

16 Oktober 2024
Roland

Roland FR-18 Diatonic Bruksanvisning

15 Oktober 2024
Roland

Roland RD-300GX Bruksanvisning

13 Oktober 2024
Roland

Roland Fantom FA-76 Bruksanvisning

12 Oktober 2024
Roland

Roland M-1000 Bruksanvisning

12 Oktober 2024
Roland

Roland KD-200 Bruksanvisning

7 Oktober 2024
Roland

Roland DM-10 Bruksanvisning

5 Oktober 2024
Roland

Roland RD-88 EX Bruksanvisning

26 September 2024
Roland

Roland VR-400UHD Bruksanvisning

25 September 2024
Roland

Roland GO:PODCAST Bruksanvisning

23 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024