Samsung AM200AXVGGR Bruksanvisning

Samsung Luftkonditionering AM200AXVGGR

Läs nedan 📖 manual på svenska för Samsung AM200AXVGGR (70 sidor) i kategorin Luftkonditionering. Denna guide var användbar för 6 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/70

Air conditioner

Installation manual

AM***AXV***

• Thank you for purchasing this Samsung air conditioner.

• Before operating this unit, please read this installation manual carefully and retain it for future

reference.

2English

Contents

Safety Information 3

Installation Procedure 5

Preparations for Outdoor Unit 5

Choosing the installation location 10

Preparing materials and tools 12

Outdoor unit installation 12

Refrigerant pipe installation 16

Electrical wiring work 38

Air tightness test and vacuum drying 47

Pipe insulation 49

Refrigerant charging 51

Basic segment display 53

Setting outdoor unit option switch and key function 53

Optional: Setting the MCU and Pipe Addresses (for HR Only) 61

Performing final checks and trial operation 63

Appendix 65

Inspection and trial operation 65

Automatic refrigerant amount detection function 67

Product Information 68

Correct Disposal of This Product

(Waste Electrical & Electronic Equipment)

(Applicable in countries with separate collection systems)

This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger,

headset, USB cable) should not be disposed of with other household waste at the end of their working life. To prevent

possible harm to the environment or human health from uncontrolled waste disposal, please separate these items from

other types of waste and recycle them responsibly to promote the sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product, or their local government office, for

details of where and how they can take these items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the purchase contract. This product

and its electronic accessories should not be mixed with other commercial wastes for disposal.

For information on Samsung’s environmental commitments and product-specific regulatory obligations, e.g. REACH, visit:

https://www.samsung.com/uk/sustainability/environment/environment-data/

English

Safety Information

Please follow the following safety information for safety of the

installer and the user.

• DVM S2 air conditioner uses R-410A refrigerant.

– When using R-410A, moisture or foreign substances may

affect the performance and reliability of the product.

Safety precautions must be obeyed when installing the

refrigerant pipe.

– The designed maximum pressure of the system is 4.1MPa

and therefore select appropriate material and thickness

according to the regulations.

– R-410A is a quasi-azeotrope of two refrigerants and it has

to be charged in liquid phase when filling the refrigerant.

(If you charge vapor refrigerant, it may change the blend of

the refrigerant and cause product malfunction.)

• You must connect the indoor units for R-410A refrigerant.

Refer to product catalog to find out the models names for

connectable indoor units. (If you connect the indoor units that

are not designed for R-410A, it cannot operated normally.)

• After completing the installation and trial operation, explain to

the user how to use and maintain the product. Also, hand over

this installation manual so that it can be stored by the user.

• Manufacturer is not responsible for the incidents occurred by

improper installation. Installer is responsible for any installation

related claims from the user occurred by neglecting warnings

and cautions stated in this manual. (Installer will be responsible

for any service charges that may occur)

• Generally, system air conditioners should not be relocated

after installation. But when it has to be relocated for inevitable

reasons, please contact Samsung’s qualified dealers for system

air conditioners.

WARNING

• Hazards or unsafe practices that may result in severe personal

injury or death.

CAUTION

• Hazards or unsafe practices that may result in minor personal

injury (to installer/user) or property damage.

General information

WARNING

• Consult qualified installer or dealer for installation.

– When installation is done by unqualified person, problems

such as water leakage, electric shock or fire may occur.

• Installation work must be done properly according to this

installation manual.

– When installation is not done properly, it may cause water

leakage, electric shock or fire.

• When installing the unit in a small room, take measure to keep

the refrigerant concentration from exceeding allowable safety

limits in case of refrigerant leakage. Consult the dealer for

precautionary measure before the installation.

– When refrigerant leaks and exceed dangerous

concentration level, it may cause suffocation accidents.

• If any gas or impurities, except R-410A refrigerant, come into

the refrigerant pipe, serious problem may occur and it may

cause injury.

• Use the supplied accessories, specified components and tools

for the installation.

– Do not use the pipe and the installation product used for

refrigerants except R-410A.

– Failure to use the specified components can cause product

fall down, water leakage, electrical shock, and fire. (The

pipe and flare components used for refrigerants except

R-410A must not be used)

• Install the outdoor unit on a hard and even place that can

support its weight.

– If the place cannot support its weight, the outdoor unit may

fall down and it may cause injury.

• Check the following before installation and service work.

– Before welding, remove dangerous and inflammable things

that may cause an explosion and fire around the work.

– Before welding, remove the refrigerant from inside the

pipe or the product.

– If you perform welding while refrigerant is in the pipe, it

may increase the pressure of the refrigerant and cause

the pipe to burst. If the pipe bursts or explodes, it may

cause severe injury to the installer.

– When welding, use the nitrogen gas to eliminate oxidation

inside the pipe.

• Do not modify the product on your own.

– Potential risk of electric shock, fire, product failure or injury.

• Fix the outdoor unit securely on foundation to resist strong

wind or earthquake.

– If the outdoor unit is not properly fixed, it turns over and

accidents may occur.

• Electric work must be done by qualified persons, complying

the national wiring regulations and installed according to the

instruction stated in the installation manual with leased circuit.

– Capacity shortage on the leased circuit and improper

installation may cause electric shock or fire.

• Make sure to perform grounding work.

– Do not connect the ground wire to a gas pipe, water pipe,

lightning rod or telephone grounding. Improper grounding

could cause electric shock.

• Wiring must be connected with the designated wires and it

must be fixed securely so that it does not apply any external

force to the connection part of the terminals.

– If connection for fixation is not properly done, it may cause

heat generation or fire.

• Neatly arrange the wires in the electrical parts to make sure

that electrical cover is closed securely without any gaps.

– If the cover is not properly closed, heat may generate on

the electrical terminal and cause electric shock or fire.

• Exclusive circuit breaker (MCCB, ELB) must be installed to the

power supply.

– When overcurrent or current leakage occurs with no circuit

breaker installed, power will not be cut-off and it may

cause electric shock or fire.

– Do not use damaged parts. It may cause fire or electric shock.

• You must cut-off the power before you work on, or adjust any

power supply part for product installation, maintenance, repair

or any other services.

– There is risk of electric shock.

– Even when the power is off, it is dangerous when you come

in contact with inverter PCB, fan PCB since high pressure

DC voltage is charged to those parts.

Safety Information

Produktspecifikationer

Varumärke:	Samsung
Kategori:	Luftkonditionering
Modell:	AM200AXVGGR
Färg på produkten:	Zwart
Vikt:	60000 g
Bredd:	1791.8 mm
Djup:	103.1 mm
Höjd:	1114.9 mm
Förpackningens vikt:	82500 g
Förpackningens bredd:	2092 mm
Djuppackning:	286 mm
Förpackningshöjd:	1319 mm
Skärm diagonal:	75 "
Upplösning:	3840 x 2160 Pixels
Pekskärm:	Ja
Original bildförhållande:	16:9
USB-kontakttyp:	USB Type-B
Typ av anslutningskontakt:	3,5 mm
Ethernet LAN:	Ja
Betraktningsvinkel, horisontell:	178 °
Betraktningsvinkel, vertikal:	178 °
Medföljande kablar:	AC, HDMI, USB Type-A to USB Type-B
Typiskt kontrastförhållande:	4000:1
Touch-teknik:	Multi-touch
Ljusstyrka:	370 cd/m²
Snabbstartsguide:	Ja
LED-bakgrundsbelysning:	Ja
VGA (D-Sub) port(ar):	1
Antal HDMI-portar:	6
Antal Ethernet LAN (RJ-45)-portar:	1
Inbyggda högtalare:	Ja
Antal inbyggda högtalare:	2
Strömförbrukning (i standby):	0.5 W
Strömförbrukning (max):	300 W
Maximal uppdateringshastighet:	60 Hz
HD typ:	4K Ultra HD
Inbyggd mikrofon:	Ja
RS-232 port:	1
HDMI-version:	2.0
Respons tid:	8 ms
Antireflexskärm:	Ja
Antal DisplayPorts:	1
Antal per paket:	1 stuk(s)
Stöder Windows:	Ja
Förvaringstemperatur:	-20 - 60 °C
LED backlight-type:	Direct-lit LED
Stöder Mac-operativsystem:	Ja
Mac-kompatibilitet:	Ja
Stöder Linux:	Ja
DisplayPort-version:	1.2a
Antal samtidiga beröringspunkter:	20
Inkluderar en penna:	Ja
S/PDIF-utgång:	Ja
Power högtalare:	30 W
Antal-HDMI-utgångar:	1
USB-kabelns längd:	3 m
Fjärrkontroll ingår:	Ja
Microfoonaansluiting:	3,5 mm
AC-ingångsspänning:	100 - 240 V
AC-ingångsfrekvens:	50/60 Hz
Drifttemperatur (TT):	0 - 40 °C
Relativ luftfuktighet i drift (VV):	20 - 85 procent
Batterier-ingår:	Ja
Arbetsplats:	- mm
Antal USB 2.0 Type-A-hubportar:	1
Antal USB 3.2-hubportar typ A (3.1 Gen 1):	2
Inbyggd projektor:	Nee
OPS-plats:	1
Typ penna:	Passief
Antal USB 2.0 Type-B Touch-portar:	3