Samsung PN43H4000AH Bruksanvisning

Samsung Tv PN43H4000AH

Läs nedan 📖 manual på svenska för Samsung PN43H4000AH (2 sidor) i kategorin Tv. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

Memorizing channels

Auto Program

for Ecuador, Others (ISDB-T, Analog only)

(depending on country settings in setup menu)

Scans for a channel automatically and stores in the TV.

■

Both: Air and Cable antenna signals.

■

Air: Air antenna signal.

■

Cable: Cable antenna signal.

✎NOTE

xAutomatically allocated program numbers may not correspond to actual

or desired program numbers. If a channel is locked, the PIN input window

appears.

xIf the antenna is connected to ANT IN (CABLE), select and if it is Cable

connected to ANT IN (AIR), select .Air

xIf both ANT IN (CABLE) and ANT IN (AIR) are connected, select .Both

Auto Tuning for Panama, Others (DVB-T)

(depending on country settings in setup menu)

Scans for a channel automatically and stores in the TV.

When Antenna Source is set to Both, Air or Cable

When selecting : Provide a value to select both and Both Air Cable

options.

When selecting : Provide a value to scan for , and Air Both Digital

Analog channels.

When selecting : Provide a value to scan for channels.Cable Analog

- Analog Cable System Analog Cable System: Select the among

STD HRC IRC, and by pressing the or button, then press ▲ ▼

the .Search

Antenna

Before your television can begin memorizing the available channels, you

must specify the type of signal source that is connected to the TV (i.e.

an or a system).Air Cable

Using the Channel menu

Channel List

(depending on country settings in setup menu)

The contains the channels your TV displays (added Channel List

channels) when you press the channel button. You can view channel

information and channel mode. Press ( ) button to change the ►Mode

channel mode.

✎When you press the button, screen is CH LIST Channel List

displayed at once.

Channel Sorting for Panama, Others (DVB-T)

■

Number / Name: Arrange the channel order according to channel

number or name on the list.

Channel mode

■

Antenna Air Cable: Switch between and .

■

Edit Favorites: Set channels you watch frequently as favorites. Add

or delete the selected channel in .Favorites 1-5

✎For detailed information about using , refer to “Edit Favorites Edit

Favorites”.

■

Favorites 1-5: Show all favorite channels, arranged in up to ﬁve

groups. Each group has a separate screen.

✎The TV displays only if you have added favorites Favorites 1-5

using .Edit Favorites

■

Added Ch. for Ecuador, Others (ISDB-T, Analog only) : Show all

added channels.

■

All for Panama, Others (DVB-T) : Shows all currently available

channels.

■

TV for Panama, Others (DVB-T) : Shows all currently available digital

channels.

■

Analog for Panama, Others (DVB-T) : Shows all currently available

analog channels.

Guide for Ecuador, Panama, Others (ISDB-T, DVB-T)

(depending on country settings in setup menu)

The EPG (Electronic Program Guide) information is provided by

broadcasters. Program entries may appear blank or out of date

depending on a channel status.

■a

Red (Quick Nav): Viewing the TV programs on the list quickly

using buttons.◄/►

■b

Green (Channel category): Select the type of channels you want

to display.

■{

Yellow (Schedule Manager): Moves to the reserved programs in

Schedule Manager.

■T

(Tools): Displays the option menu. The option menu items that

appear may differ depending on the channel status and type.

−Watch / Schedule Viewing

✎When selecting the current program, you can watch the selected

program.

✎When selecting the future program, you can reserve to watch the

selected program. To cancel the schedule, press the ENTER

button again and select .Cancel Schedule

−More Info: Display details of the selected program.

Schedule Manager

You can set a desired channel to be displayed automatically at the

intended time. In addition, you can view, modify or delete a channel you

have reserved to watch.

✎You must set the current time first using the Time →Clock

function in the menu to use this function.System

1. Schedule Schedule ManagerPress the on the screen. The

Schedule Viewing menu appears.

2. Press the buttons to set each option menu.◄/►/▲/▼

■

Antenna: Select the desired broadcasting signal.

■

Channel: Select the desired channel.

■

Repeat Once Manual Sat~Sun Mon~Fri Everyday: Select , , , or . If

you select , you can set the day you want.Manual

✎A check (

) mark indicates a day you selected.

■

Date: You can set a desired date.

✎Date is available only when you select in .Once Repeat

■

Start Time: You can set the start time you want.

✎If you want to edit or cancel a reserved schedule, select the

reserved schedule on . Then press the Schedule Manager

ENTER

button and select the or .Edit Delete

Edit Channel

(depending on country settings in setup menu)

You can add, edit or delete channels.

Deleting a channel from the channel list

1 Edit ChannelGo to screen.

2. Press the buttons to select the desired channel, and then ▲/▼

press ENTER

button. The (

) mark indicates the channel

you’ve selected.

✎You can select more than one channel.

✎Press ENTER

button again to deselect the channel.

3. Press

( ) button. The selected channel has been deleted Delete

from the channel list.

Adding a channel to the channel list

for Ecuador, Others (ISDB-T, Analog only)

1. Edit ChannelOn the screen, press the button, and then TOOLS

select the .Category

2. All OKSelect and press the button. A deleted channel appears in

All channel list.

✎Your TV will display all channels, including channels you deleted

from the channel list, on the .All

✎A gray-colored channel indicates the channel has been deleted.

3. Select a deleted channel, and then press the

( ) button.Add

yThe slots and openings in the cabinet and in the back or bottom are provided for necessary ventilation. To ensure reliable operation of this

apparatus, and to protect it from overheating, these slots and openings must never be blocked or covered.

- Do not cover the slots and openings with a cloth or other materials.

- Do not block the slots and openings by placing this apparatus on a bed, sofa, rug or other similar surface.

- Do not place this apparatus in a confined space, such as a bookcase or built-in cabinet, unless proper ventilation is provided.

yDo not place this apparatus near or over a radiator or heat register, or where it is exposed to direct sunlight.

yDo not place a vessel containing water (vases etc.) on this apparatus, as this can result in a risk of ﬁre or electric shock.

yDo not expose this apparatus to rain or place it near water (near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement, or near

a swimming pool etc.). If this apparatus accidentally gets wet, unplug it and contact an authorized dealer immediately.

yMake sure to pull out the power cord from the outlet before cleaning.

yThis apparatus use batteries. In your community, there might be regulations that require you to dispose of these batteries properly to protect

the environment. Please contact your local authorities for disposal or recycling information.

yDo not overload wall outlets, extension cords, or adaptors beyond their capacity, since this can result in ﬁre or electric shock.

yPower-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them. Pay

particular attention to cords at the plug end, where connected to adaptors, and at the point where they exit from the apparatus.

yTo protect this apparatus from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet

and disconnect the antenna or cable system. This will prevent damage to the set due to lightning and power line surges.

yBefore connecting the AC power cord to the DC adaptor outlet, make sure the voltage designation of the DC adaptor corresponds to the local

electrical supply. (depending on the model)

yNever insert anything metallic into the open parts of this apparatus. Doing so may create a danger of electric shock.

yTo avoid electric shock, never touch the inside of this apparatus. Only a qualiﬁed technician should open this apparatus.

yMake sure to plug the power cord in until it is ﬁrmly inserted. Pull on the plug, not the cord, when removing the power cord from the outlet. Do

not touch the power cord with wet hands.

yIf this apparatus does not operate normally - in particular, if there are any unusual sounds or smells coming from it - unplug it immediately and

contact an authorized dealer or service center.

yBe sure to pull the power plug out of the outlet if the TV is to remain unused or if you are to leave the house for an extended period of time

(especially when children, elderly or disabled people will be left alone in the house).

- Accumulated dust can cause an electric shock, an electric leakage, or a fire by causing the power cord to generate sparks and heat,

or cause the insulation to deteriorate.

yBe sure to contact an authorized service center, when installing your set in a location with heavy dust, high or low temperatures, high humidity,

chemical substances or where it will operate for 24 hours a day such as in an airport, a train station, etc. Failure to do so may cause serious

damage to your set.

yUse only a properly grounded plug and receptacle.

- An improper ground may cause electric shock or equipment damage. (Class l Equipment only.)

yTo turn off the apparatus completely, you must pull the power plug out of the wall socket. Consequently, the power plug should be readily

accessible at all times.

yDo not allow children to hang onto the product.

yStore the accessories (batteries, etc.) in a location safely out of the reach of children.

yDo not install the product in an unstable location such as a shaky self, a slanted ﬂoor, or a location exposed to vibration.

yDo not drop or impart a shock to the product. If the product is damaged, disconnect the power cord and contact a service center.

yTo clean the product, unplug the power cord from the power outlet and wipe the product using a soft cloth dipped in a small amount of water.

Do not use any chemicals such as wax, benzene, alcohol, thinners, insecticide, air freshener, lubricant or detergent. This may damage the

appearance or erase the printing on the product.

yDo not expose the apparatus to dripping or splashing.

yDo not dispose of batteries in a ﬁre.

yDo not short circuit, disassemble, or overheat the batteries.

yThere is a danger of explosion if you replace the batteries with the wrong type of battery. Replace only with the same or equivalent type.

yWARNING - TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OTHER OPEN FLAMES AWAY FROM THIS PRODUCT AT ALL

TIMES.

Warning! Important Safety Instructions

Please read the safety instructions below before installing and using the product.

CAUTION

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK). THERE

ARE NO USER SERVICEABLE PARTS INSIDE. REFER

ALL SERVICING TO QUALIFIED PERSONNEL.

RISK OF ELECTRIC SHOCK. DO NOT OPEN.

This symbol indicates that high voltage is

present inside. It is dangerous to make any kind

of contact with any internal part of this product.

This symbol indicates that important literature

concerning operation and maintenance has

been included with this product.

Adding a channel to the channel list

for Panama, Others (DVB-T) (analog channels only)

1. Press the TOOLS button on the screen, and then select Channel

Add/Delete.

2. Press the button to select the deleted channel, and then select ▲/▼

Add.

Using the colored and function buttons with the Edit Channel

■a

Red (Change Number) for Panama, Others (DVB-T) : (digital

channels only) Changes channel order on the channel list.

■b

Green (Delete / Add for Ecuador, Others (ISDB-T, Analog only) )

−Delete: Deletes a channel from the channel list.

−Add: Adds a deleted channel. It only appears when you select the

deleted channel in .All

■{

Yellow (Lock / Unlock): Lock a channel so that the channel

cannot be selected and viewed. / Unlock the channel that you locked.

✎This function is available only when the is set to Channel Lock

On.

✎The PIN input screen appears. Enter your 4-digit PIN, the default

of which is “0-0-0-0”.

■}

Blue (Select All / Deselect All): Selects or deselects all channels

at once.

■

(Go To): Goes to channel directly by pressing numbers (0~9).

■k

(Page): Moves to next or previous page.

■T

(Tools): Displays the option menu. The option menu items that

appear may differ depending on the channel status and type.

−Sorting for Panama, Others (DVB-T) : (digital channels only)

Change the list ordered by channel number or channel name.

−Antenna: Select the desired broadcasting signal.

−Category: Change the channel mode. The selected channel mode

is displayed.

−Edit Favorites Edit Favorites: Go to screen directly.

−Rename Channel: (analog channels only) Assign a name of up to

ﬁve characters to a channel.

−Channel Info

for Panama, Others (DVB-T) : (digital channels only)

Display details of the selected channel.

−Information: Display details of the selected program.

Edit Favorites

You can add, edit or delete favorite channels.

Adding a channel to the Favorites 1-5

1. Edit FavoritesGo to screen.

2. Press the buttons to select the desired channel, and then press ▲/▼

ENTER

button.

3. Favorites 1-5Choose a speciﬁc favorite list among using

(Change Fav.) button, and then press the

}

( ) button. The Add

selected channel has been added in .Favorites 1-5

✎One favorites channel can be added in several of favorites among

Favorites 1-5.

Deleting a channel from the Favorites 1-5

1. Edit FavoritesOn the screen, select the favorite list using

(Change Fav.) button.

2. Move to favorite list, and then select the desired channel you want to

delete.

3. Press the

}

( ) button. The selected channel has been deleted Delete

from the .Favorites 1-5

✎If you want to change the favorite channel order, press the

( ) button and change the order using buttons.Change order ▲/▼

Using the colored and function buttons with the Edit Favorites

■a

Red (Category / Change order)

−Category: Change the channel mode. The selected channel mode

is displayed.

−Change order: Changes the favorite channel order.

−

(Done): Completes changing the channel order.

■b

Green (Change Fav.) Favorites 1-5: Changes favorite list among .

■{

Yellow (Select All / Deselect All): Selects or deselects all

channels at once.

■}

Blue (Add / Delete)

−Add Favorites 1-5: Adds selected channels to .

−Delete Favorites 1-5: Deletes the favorite channel from .

■

(Go To): Goes to channel directly by pressing numbers (0~9).

■k

(Page): Moves to next or previous page.

■T

(Tools): Displays the option menu. The option menu items that

appear may differ depending on the channel status and type.

−Copy to Favorites Favorites : Edit the selected favorite channel in

1-5. You can add or delete from favorite list.

−Rename Favorites: Assign your own favorite channel name.

−Antenna: Select the desired broadcasting signal.

−Sorting for Panama, Others (DVB-T) : (digital channels only)

Change the list ordered by channel number or channel name.

−Edit Channel Edit Channel: Go to screen directly.

−Information: Display details of the selected program.

Locking Programs

Program Rating Lock for Ecuador, Others (ISDB-T)

(depending on country settings in setup menu)

■

Program Rating Lock: Prevent unauthorized users, such as children,

from watching unsuitable program with a user deﬁned 4-digit PIN

code.

✎It is only available in Brazil signal.

✎The PIN input screen appears before the setup screen.

✎Enter your 4-digit PIN, the default of which is 0-0-0-0. Change the

PIN using the option.Change PIN

Channel Lock

Lock channels to prevent unauthorized users, such as children, from

watching unsuitable program.

✎The PIN input screen appears. Enter your 4-digit PIN, the default of

which is “0-0-0-0”.

Other Features

Channel Settings

(depending on country settings in setup menu)

■

Digital Manual Tuning for Panama, Others (DVB-T) : (digital

channels only) Scans for a digital channel manually and stores in the

TV. Press the button to search the digital channels by adjusting New

the or .Channel Frequency

✎If a channel is locked, the PIN input window appears.

✎Digital Manual Tuning is only available in digital TV mode.

xChannel: Set the channel number using the or number ▲/▼

(0~9) buttons.

xFrequency: Set the frequency using the number buttons.

■

Fine Tune : (analog channels only) If the reception is clear, you do not

have to ﬁne tune the channel, as this is done automatically during the

search and store operation. If the signal is weak or distorted, ﬁne tune

the channel manually.

✎Fine tuned channels that have been saved are marked with an

asterisk “*” on the right-hand side of the channel number in the

channel banner.

✎To reset the fine-tuning, select .Reset

■

Color System for Ecuador, Panama, Others (ISDB-T, DVB-T) :

(analog channels only) Normally the TV can receive image and sound

with good quality in mode. This mode detects the color signal Auto

sources automatically. If the color implementation is unsatisfactory,

select any of PAL-M PAL-N NTSC, or .

Subtitle

for Panama, Others (DVB-T)

(digital channels only) (depending on country settings in setup menu)

Use this menu to set the mode.Subtitle

✎The subtitle feature does not work in Component or HDMI modes.

■

Subtitle: Switches subtitles on or off.

Subtitle Mode: Sets the subtitle mode.

Subtitle Language: Sets the subtitle language.

✎If the program you are watching does not support the Hearing

Impaired Normal function, automatically activates even if the

Hearing Impaired mode is selected.

✎English is the default in cases where the selected language is

unavailable in the broadcast.

■

Primary Subtitle: Sets the primary subtitle.

■

Secondary Subtitle: Sets the secondary subtitle.

Caption

(On-Screen Text Messages)

■

Caption: You can switch the caption function on or off. If captions are

not available, they will not be displayed on the screen.

✎The Caption feature does not work in Component or HDMI

modes.

■

Caption Mode: You can select the desired caption mode.

✎The availability of captions depends on the program being

broadcasted.

CC1~CC4 / Text1~Text4: (analog channels only) The Analog Caption

function operates in either analog TV channel mode or when a signal

is supplied from an external device to the TV. (Depending on the

broadcasting signal, the Analog Caption function may or may not

work with digital channels.)

Audio Options

(depending on country settings in setup menu)

■

Multi-Track Sound

: (analog channels only)

Mono: Choose for channels that are broadcasting in mono or if you

are having difﬁculty receiving a stereo signal.

Stereo: Choose for channels that are broadcasting in stereo.

SAP: Choose to listen to the Separate Audio Program, which is

usually a foreign-language translation.

✎Depending on the particular program being broadcast, you can

listen to , or .Mono Stereo SAP

■

Audio Language

: (digital channels only) Change the default

value for audio languages.

Primary Audio / Secondary Audio for Panama, Others (DVB-T)

: You can set the primary or secondary audio.

✎The available language may differ depending on the broadcast.

■

Audio Format for Panama, Others (DVB-T) : (digital channels only)

Select the audio format of current broadcasting. The available items

may differ depending on the broadcasting status.

Picture Menu

Changing the Preset Picture Mode

Picture Mode

Select your preferred picture type.

■

Dynamic: Suitable for a bright room.

■

Standard: Suitable for a normal environment.

■

Movie: Suitable for watching movies in a dark room.

Adjusting Picture Settings

Cell Light / Contrast / Brightness / Sharpness /

Color / Tint (G/R)

Your television has several setting options for picture quality control.

✎You can adjust and store settings for each external device

connected to the TV.

✎Lowering picture brightness reduces power consumption.

Picture Size

(depending on country settings in setup menu)

Set the various picture options such as picture size and aspect ratio.

✎The picture size can vary depending on the input resolution when you play

content using Videos in Media Play.

✎HD (High Definition): 16:9 - 1080i/1080p (1920x1080), 720p (1280x720)

✎You can adjust and store settings for each external device you have

connected to an input on the TV.

✎Depending on the input source, the picture size options may vary.

■

Picture Size: If you have a cable box or satellite receiver, it may have

its own set of screen sizes as well. However, we highly recommend

you use your TV’s 16:9 mode most of the time.

−16:9: Sets the picture to 16:9 wide screen mode.

−Zoom1 for Ecuador, Others (ISDB-T, Analog only) : Use for

moderate magniﬁcation.

−Zoom2 for Ecuador, Others (ISDB-T, Analog only) : Use for a

stronger magniﬁcation.

−Wide Fit for Ecuador, Others (ISDB-T, Analog only) : Enlarges the

aspect ratio of the picture to ﬁt the entire screen.

−Wide Zoom

for Panama, Others (DVB-T) : Magniﬁes the picture

size more than 4:3.

−Zoom for Panama, Others (DVB-T) : Magniﬁes the 16:9 wide

pictures vertically to ﬁt the screen size.

−4:3: Sets the picture to basic (4:3) mode.

✎Do not watch in 4:3 format for a long time. Traces of borders

displayed on the left, right and center of the screen may cause

image retention (screen burn) which are not covered by the

warranty.

−Screen Fit: Displays the full image without any cut-off when HDMI

(720p / 1080i / 1080p) or Component (1080i / 1080p) signals are

input.

■

Position: Adjusts the picture position.

- Only available in , , or .Zoom1 Zoom2 Wide Fit Screen Fit

for Ecuador, Others (ISDB-T, Analog only)

- Only available in or .Screen Fit Wide Zoom

for Panama, Others (DVB-T)

✎Adjust the by using buttons in the Position ▲/▼ Position

screen.

■

Zoom/Position for Panama, Others (DVB-T) : Adjust the picture size

and position. It is only available in .Zoom

✎Adjust the or by using buttons in the Zoom Position ▲/▼

Zoom/Position screen.

PIP

You can watch the TV tuner and one external video source

simultaneously. (Picture-in-Picture) does not function in the same PIP

mode.

✎For PIP sound, refer to the instructions.Sound Select

✎If you turn the TV off while watching in PIP mode, the PIP window

will disappear.

✎You may notice that the picture in the PIP window becomes slightly

unnatural when you use the main screen to view a game or karaoke.

PIP Settings

Main picture Sub picture

Component, HDMI TV

■

PIP: Activate or deactivate the PIP function.

■

Antenna Air Cable: Select either or as the input source for the sub-

screen.

■

Channel: Select the channel for the sub-screen.

■

Size: Select a size for the sub-picture.

■

Position: Select a position for the sub-picture.

■

Sound Select: You can choose the desired sound ( or ) in Main Sub

PIP mode.

Figures and illustrations in this User Manual are provided for reference only and

may differ from actual product appearance. Product design and speciﬁcations

may be changed without notice.

Important User Information

yScreen Image retention

Do not display a still image (such as on a video game) including the some small

ﬁxed logo on the plasma display panel for more than several minutes as it can cause

screen image retention.

This image retention is also known as “screen burn”. To avoid such image retention,

reduce the degree of brightness and contrast of the screen when displaying a still

image.

yHeat on the top of the Plasma TV

The top side of the TV may become hot after long periods of use as heat dissipates

from the panel through the vent hole in the upper part of the TV.

This is normal and does not indicate any defect or operational failure of the unit.

However, children should be prevented from touching the upper part of the TV.

The TV is making a ‘cracking’ noise.

A ‘cracking’ noise may occur when the TV contracts or expands due to a change

in the surrounding environment such as temperature or humidity. This is normal and

not a defect.

yCell Defects

Your plasma TV has a panel containing 2,360,000 (HD-level) to 6,221,000 (FHD-

level) pixels which require sophisticated technology to produce. However, there may

be a few bright or dark pixels on the screen. These pixels will have no impact on the

performance of the product.

yAvoid operating the TV at temperatures below 41°F (5°C)

yA still image displayed too long may cause permanent damage to the PDP

Panel.

Watching the Plasma TV in 4:3 format for a long period of

time may leave traces of the borders on the left, right, top, or

bottom of the screen. Playing a DVD or a game console may

have a similar effect.

Damage caused by the above effect is not covered by the

warranty.

yAfter-images on the Screen.

Displaying still images from Video games and PC for longer than a certain period of

time may produce partial after-images.

To prevent this effect, reduce the ‘brightness’ and ‘contrast’ when displaying still

images for a long time.

yWarranty

Warranty does not cover any damage caused by image retention.

Burn-in is not covered by the warranty.

Securing the Installation Space

Keep the required distances between the product and other objects (e.g. walls) to

ensure proper ventilation.

Failing to do so may result in ﬁre or a problem with the product due to an increase in

the internal temperature of the product.

✎When using a stand or wall-mount, use parts provided by Samsung

Electronics only.

xIf you use parts provided by another manufacturer, it may result in a problem

with the product or an injury due to the product falling.

✎The appearance may differ depending on the product.

✎Be careful when you contact the TV because some parts can be somewhat

hot.

Installation with a stand. Installation with a wall-mount.

10cm

10cm10cm

10cm

Contact SAMSUNG WORLD WIDE

If you have any questions or comments relating to Samsung products, please contact

the SAMSUNG customer care center.

Country Customer Care Center Web Site

ARGENTINE 0800 333 3733 www.samsung.com.ar

BRAZIL

0800-124-421 (Demais cidades

e regiões)

4004-0000 (Capitais e grandes

centros)

www.samsung.com.br

BOLIVIA 800-10-7260 www.samsung.com

CHILE 800-SAMSUNG(726-7864) www.samsung.com/cl

COLOMBIA 01 8000 112 112

Bogotá 600 12 72 www.samsung.com/co

COSTA RICA 0-800-507-7267 www.samsung.com/latin (Spanish)

www.samsung.com/latin_en (English)

DOMINICA 1-800-751-2676 www.samsung.com/latin (Spanish)

www.samsung.com/latin_en (English)

ECUADOR 1-800-10-7267 www.samsung.com/latin (Spanish)

www.samsung.com/latin_en (English)

EL SALVADOR 800-6225 www.samsung.com/latin (Spanish)

www.samsung.com/latin_en (English)

GUATEMALA 1-800-299-0013 www.samsung.com/latin (Spanish)

www.samsung.com/latin_en (English)

HONDURAS 800-27919267 www.samsung.com/latin (Spanish)

www.samsung.com/latin_en (English)

JAMAICA 1-800-234-7267 www.samsung.com

NICARAGUA 001-800-5077267 www.samsung.com/latin (Spanish)

www.samsung.com/latin_en (English)

PANAMA 800-7267 www.samsung.com/latin (Spanish)

www.samsung.com/latin_en (English)

PARAGUAY 009 800 542 0001 www.samsung.com.py

PERU 0-800-777-08 www.samsung.com/pe

PUERTO RICO 1-800-682-3180 www.samsung.com

TRINIDAD &

TOBAGO 1-800-SAMSUNG(726-7864) www.samsung.com

URUGUAY 000 405 437 33 www.samsung.com

VENEZUELA 0-800-100-5303 www.samsung.com/ve

Plasma TV

User Manual

BN68-05772E-00

Getting Started

Accessories

yRemote Control & Batteries (AAA x 2)

yWarranty Card / Regulatory Guide (Not available in some locations)

yCable Holder

yPower Cord

yOwner’s Instructions

Input Cables (Sold Separately)

yComposite (AV)

yComponent

yCoaxial (RF)

yHDMI

Arrange the cables using the Cable Holder

TV Controller (Panel Key)

The TV’s Controller, a small joy stick like button on the rear left side of the TV, lets you control the TV without the remote control.

Remote control sensor

TV Controller

The image is drawn by

facing the front side of

the TV.

Function menu

Return

Selecting the Media Play

Selecting a Source

Selecting the Menu

Power Off

✎The product color and shape may vary depending on the model.

✎Exits the menu when pressing the controller more than 1 second.

✎When selecting the function by moving the controller to the up/down/left/right directions, be sure not to press the controller. If you press it first,

you cannot operate it to move the up/down/left/right directions.

Setup (Initial Setup)

When you turn the TV on for the ﬁrst time, a sequence of screens and on-screen prompts will assist you in conﬁguring the TV’s basic settings. Plug

the power cord into a wall outlet, and then press the button to turn on the TV. Set the initial setup following instructions that the TV guides.POWER

✎Setup Source is available only when the is set to TV.

✎To start the , enter the password using the remote control. The default password is 0-0-0-0.Setup

✎Select the proper county. The setup process and TV menu will differ depending on selecting country.

Connections

Connect your TV to an antenna or cable connection, and then connect your peripherals. When done, connect the power cord to the TV, and then connect the power cord to

an AC wall outlet. If you are connecting your TV to a cable or satellite box using HDMI, Component, or Composite connections, you do not need to connect the ANT IN jack to

an antenna or a cable connection.

yFor the best picture and audio quality, connect digital devices using an HDMI cable.

yIf you connect an external device to the TV that uses an older version of HDMI, the

video and audio may not work. If this occurs, ask the manufacturer of the device

about the HDMI version and, if it is out of date, request an upgrade.

yBe sure to purchase a certiﬁed HDMI cable. Otherwise, the picture may not display

or a connection error may occur.

yFor set-top box connection using HDMI cable, we highly recommend you to

connect the port.HDMI IN 1(STB)

yThe TV model is not allowed for PC connection (distortion or incorrect picture

displaying can appear).

Changing the Input Source

Source

When you are watching TV and you want to watch a movie on your

DVD player or Blu-ray player or switch to your cable box or STB satellite

receiver, you need to change the Source.

1. Press the SOURCE button on your remote.

2. Select a desired external input source.

■

TV / HDMI1 / HDMI2 / AV / Component

✎You can only choose external devices that are connected to the TV.

In the , connected inputs are highlighted.Source

How to Use Edit Name

Edit Name lets you associate a device name to an input source. To

access , press the button when the is Edit Name TOOLS Source

displayed. Select the name of the device connected to each input jack to

make your input source selection easier.

Information

You can see detailed information about the connected external device.

Remote Control

✎This remote control has Braille points on the Power, Channel, and Volume buttons and can be used by visually impaired persons.

Press to select additional channels (digital) being

broadcasted by the same station. For example, to

select channel ‘54-3’, press ‘54’, then press ‘-’ and ‘3’.

(Not available in some countries.)

Returns to the previous channel.

Press to directly access to channels.

Turns the TV on and off.

Use these buttons in a speciﬁc feature.

E-MANUAL: It's Not available.

P.SIZE: Lets you choose the picture size.

: Turns the on or off.Soccer Mode

Cuts off the sound temporarily.

Display the EPG (Electronic Program Guide).

(Not available in some countries.)

Displays the channel list on the screen.

Displays information on the TV screen.

Quickly select frequently used functions.

Selects the on-screen menu items and changes the

values seen on the menu.

Exit the menu.

Returns to the previous menu.

Displays and selects the available video

sources.

Use these buttons according to the direction

on screen.

Changes channels.

Displays the main on-screen menu.

Views the .Media Play

Adjusts the volume.

MEDIA.P GUIDE

FÚTBOL

Installing batteries (Battery size: AAA)

✎NOTE

• Use the remote control within 23 feet of the TV.

• Bright light may affect the performance of the remote control.

Avoid use when nearby ﬂuorescent lights or neon signs.

• The Color and shape may vary depending on the model.

Broadcasting Menu

Using the INFO button (Now & Next guide)

for Ecuador, Panama, Others (ISDB-T, DVB-T)

(depending on country settings in setup menu)

The display identiﬁes the current channel and the status of certain audio-

video settings.

The Now & Next guide shows daily TV program information for each

channel according to the broadcasting time.

✎When you press the button, a channel information banner will INFO

appear on the top of the screen. And then press the ENTER

button, you can see the details of the program.

xScroll to view information for a desired program while ◄ ►

watching the current channel.

xScroll to view information for other channels. ▲ ▼

for Panama, Others (DVB-T)

(5V 0.5A)

USB HDMI IN 1

(STB)

COMPONENT / AV IN

AUDIOVIDEO

HDMI IN 2

ANT IN

CABLE

AIR

SERVICE

AUDIO OUT

AUDIO IN

L-AUDIO-R

HDMI OUT

AUDIO OUT

R-AUDIO-L

VIDEO OUT

W R

Y W

AUDIO OUT

R-AUDIO-L

P P YR B

COMPONENT OUT

R B G

W R

R W

Power Input

TV Rear Panel

TV Side Panel

VHF/UHF Antenna

Cable

USB

Component connection

Blu-ray player / DVD

AV connection

VCR

✎The position of port may differ

depending on the model.

✎The PDP device may

interfere with an amateur

radio or AM radio.

✎When using two-way radio

mobile and portable units or

amateur radio or AM radio

near by your TV, this may

cause the TV to malfunction.

HDMI connection

Set-top Box / Blu-ray players

Audio connection

Ampliﬁer / Home Theater

To see Analog channels clearly, prevent

the antenna cables from contacting the

rear of the TV.

Connect the antenna cables directly

without using a divider.

- 2 -- 1 -

- 6 -- 5 -

- 3 -

- 7 -

- 4 -

- 8 -

[PH4000-PA]BN68-05772E-00ENG.indd 1 2014-01-29 �� 1:23:43

Changing the Picture Options

Advanced Settings

(available in mode)Standard / Movie

■

Dynamic Contrast: Adjusts the screen contrast.

■

Black Tone: Select the black level to adjust the screen depth.

■

Flesh Tone: Emphasize pink “ﬂesh tone”.

■

RGB Only Mode: Displays the Red Green, and Blue color for making

ﬁne adjustments to hue and saturation.

■

Color Space: Adjusts the range of colors available to create the

image.

■

White Balance: Adjusts the color temperature of the picture so that

white objects look white (instead of, for example, slightly pink or

slightly yellow) and the overall color of the picture looks natural.

2 point

R-Offset / G-Offset / B-Offset: Adjusts each color’s (red, green,

blue) darkness.

R-Gain / G-Gain / B-Gain: Adjusts each color’s (red, green, blue)

brightness.

Reset White Balance: Resets the to its default settings.

■

Gamma: Adjusts the primary color intensity.

■

Motion Lighting: Reduce power consumption by brightness control

adapted motion.

✎Only available in mode.Standard

Picture Options

■

Color Tone

✎Warm1 Warm2 or will be deactivated when the picture mode is

Dynamic.

✎Settings can be adjusted and stored for each external device

connected to an input on the TV.

■

Digital Clean View: If the broadcast signal received by your TV is

weak, you can activate the feature to reduce any Digital Clean View

static and ghosting that may appear on the screen.

✎When the signal is weak, try other options until the best picture

is displayed.

Auto Visualization: When changing analog channels, displays signal

strength.

✎Only available for analog channels.

✎When the button is pressed, the signal strength bar is INFO

displayed.

✎When the bar is green, you are receiving the best possible signal.

■

MPEG Noise Filter: Reduces MPEG noise to provide improved

picture quality.

■

HDMI Black Level: Selects the black level on the screen to adjust the

screen depth.

✎Available only in HDMI mode (RGB signals).

■

Film Mode: Sets the TV to automatically sense and process ﬁlm

signals from all sources and adjusts the picture for optimum quality.

✎Available in TV mode and external input mode which supports SD

(480i / 576i) and HD (1080i) signals.

✎If the screen does not seem natural, change its option to / Off

Auto1/ Auto2 Film Mode in .

Picture Off

The screen is turned off but the sound remains on. Press any button

except volume button to turn on the screen.

Reset Picture

Resets your current picture mode to its default settings.

Sound Menu

Changing the Preset Sound Modes

Sound Mode

■

Standard: Selects the normal sound mode.

■

Music: Emphasizes music over voices.

■

Movie: Provides the best sound for movies.

■

Clear Voice: Emphasizes voices over other sounds.

■

Amplify: Increase the intensity of high-frequency sounds to allow a

better listening experience for the hearing impaired.

Adjusting Sound Settings

Sound Effect

(standard sound mode only)

■

DTS TruSurround: This function provides a virtual 5.1 channel

surround sound experience through a pair of speakers or headphones

using HRTF (Head Related Transfer Function) technology.

■

DTS TruDialog: This function allows you to increase the intensity of a

voice over background music or sound effects so that dialog can be

heard more clearly.

■

Equalizer Equalizer: Use to customize sound setting for each

speaker.

−Balance: Adjusts the balance between the right and left speaker.

−100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment):

Adjusts the volume level of speciﬁc bandwidth frequencies.

−Reset: Resets the equalizer to its default settings.

Speaker Settings

■

Speaker Select

A sound echo may occur due to a difference in decoding speed

between the main speaker and the audio receiver. In this case, set the

TV to .External Speaker

✎When is set to , the volume Speaker Select External Speaker

and buttons will not operate and the sound settings will be MUTE

limited.

■

Auto Volume: To equalize the volume level on each channel, set to

Normal.

Night: This mode provides an improved sound experience compared

to mode, making almost no noise. It is useful at night.Normal

✎To use the volume control on the source device connected to the

TV, set Auto Volume to Off on the TV. Otherwise, a change to the

volume control of the source device may not be applied.

Additional Settings for Panama, Others (DVB-T)

(depending on country settings in setup menu)

■

DTV Audio Level: (digital channels only) This function allows you

to reduce the disparity of a voice signal (which is one of the signals

received during a digital TV broadcast) to a desired level.

✎According to the type of broadcast signal, can be MPEG/HE-AAC

adjusted between -10dB and 0dB.

✎To increase or decrease the volume, adjust between the range 0 and

-10 respectively.

■

Dolby Digital Comp: (digital channels only) This function minimizes

signal disparity between a dolby digital signal and a voice signal (i.e.

MPEG Audio, HE-AAC, ATV Sound).

✎Select to obtain dynamic sound, and to reduce the Line RF

difference between loud and soft sounds at night time.

Line: Set the output level for signals greater or less than -31dB

(reference) to either -20dB or -31dB.

RF: Set the output level for signals greater or less than -20dB

(reference) to either -10dB or -20dB.

Reset Sound

Reset all sound settings to the factory defaults.

System Menu

Executing initial setup

Setup

Conﬁgure the channels and the time when setting up the TV for the ﬁrst

time or when resetting the unit.

✎Execute the initial setup following instructions that the TV guides.

✎Enter your 4-digit PIN, the default of which is 0-0-0-0.

Setting the Time

Time

(depending on country settings in setup menu)

✎The current time will appear every time you press the button.INFO

■

Clock Set Date Time for Others (Analog only) : Set the and .

✎You can set the and directly by pressing the number Date Time

buttons on the remote control.

■

Clock for Ecuador, Panama, Others (ISDB-T, DVB-T) : Setting the

clock is for using various timer features of the TV.

✎If you disconnect the power cord, you have to set the clock again.

Clock Mode: Set the current time manually or automatically.

−Auto: Set the current time automatically using the time from a digital

channel.

✎The antenna must be connected in order to set the time

automatically.

−Manual: Set the current time manually.

✎Depending on the broadcast station and signal, the auto time set

up may not be correct. In this case, set the time manually.

Clock Set Date Time: Set the and .

✎Available only when is set to .Clock Mode Manual

✎You can set the and directly by pressing the number Date Time

buttons on the remote control.

Time Zone for Ecuador, Others (DVB-T) : Select your time zone.

✎This function is only available when the is set to Clock Mode

Auto.

Sleep Timer

Automatically shuts off the TV after a preset period of time. (30, 60, 90,

120, 150 and 180 minutes).

✎To cancel the , select .Sleep Timer Off

On Timer / Off Timer

■

On Timer: Three different on timer settings can be made. You must

set the clock ﬁrst.

Setup Once Everyday Mon~Fri Mon~Sat Sat~Sun: Select Off, , , , ,

or . If you select , you can set up the day you want to Manual Manual

activate the timer.

✎The

mark indicates days you’ve selected.

Time: Set the hour, minute, am/pm.

Volume: Set the desired volume level.

Source: To select the source of the content that will play when the TV

turns on. You can:

xSelect and have the TV display a specific air or cable channel.TV

xSelect and have the TV play back photo or audio files from USB

a USB device.

xSelect a source on your TV that you have connected a set-top box

to, and have the TV display a channel from the set-top box.

✎The USB device must be connected to your TV before you can

select .USB

✎If you select a source other than or , you must:TV USB

xHave a cable or satellite set-top box attached to that source

xSet the set-top box to the channel you want to watch when the

TV goes on

xLeave the set-top box turned on.

✎When you select a source other than or , the TV USB Antenna

and options will disappear.Channel

Antenna Source TV: (when the is set to ) Select the desired

broadcasting signal.

Channel Source TV: (when the is set to ) Select the desired channel.

Music / Photo Source USB: (when the is set to ): Select a folder in

the USB device containing the music or photo ﬁles you want to play

when the TV turns on automatically.

✎If there is no music file on the USB device or the folder containing

a music file is not selected, the Timer function does not operate

correctly.

✎When there is only one photo file in the USB, the Slide Show will

not play.

✎A folder with a name that is too long cannot be selected.

✎Each USB device you use is assigned its own folder. When using

more than one of the same type of USB device, make sure the

folders assigned to each USB device have different names.

✎It is recommended that you use a USB memory stick and a multi

card reader when using .On Timer

✎The function may not work with USB devices On Timer

with a built-in battery, MP3 players, or PMPs made by some

manufacturers because these devices take a long time to be

recognized.

■

Off Timer: Three different off timer settings can be made. You must

set the clock ﬁrst.

Setup Once Everyday Mon~Fri Mon~Sat Sat~Sun: Select Off, , , , ,

or . If you select , you can set up the day you want to Manual Manual

activate the timer.

✎The

mark indicates days you’ve selected.

Time: Set the hour, minute, and am/pm.

Economical Solutions

Eco Solution

■

Energy Saving: This adjust the brightness of the TV in order to

reduce power consumption.

■

No Signal Power Off : Sets how quickly the TV switches to standby

mode, if no picture is being received.

■

Auto Power Off: The TV will be automatically turned off when no user

operation is received for 4 hours.

✎If the option is set to , the TV will stay on even Auto Power Off Off

if no operations are performed on the TV.

Other Features

Menu Language

Set the menu language.

Screen Burn Protection

To reduce the possibility of screen burn, this unit is equipped with screen

burn prevention technology. The Time setting allows you to program the

time between movement of the picture in minutes.

✎Only displays the files with supported music file extension. Other file

extensions are not displayed, even if they are saved on the same

USB device.

✎If the sound is abnormal when playing music files, adjust the

Equalizer Sound in the menu. (An over-modulated music file may

cause a sound problem.)

xSupported Music Formats

File Extension Type Codec Remark

*.mp3 MPEG MPEG1 Audio Layer 3

*.m4a / *.mpa /

*.aac MPEG4 AAC

*.ﬂac FLAC FLAC Supports up to 2ch.

*.ogg OGG Vorbis Supports up to 2ch.

*.wma WMA WMA

WMA 10 Pro supports up to 5.1

channel and M2 proﬁle. (WMA lossless

audio is not supported.)

*.wav wav wav

*.mid / *.midi midi midi type 0 and type 1

Setting the Encoding language

Set the encoding language if the text is not supported.

1. OptionsPress the button to select ▲ at the top of music main

screen and select .Encoding

2. Select the desired encoding language.

Using the Soccer Mode

Soccer Mode

This mode provides optimized condition for watching sports games.

(Zoom): Pause playback and divide the picture into 9 parts. Select

a part to zoom it in.

✎When the is , the picture and sound modes are Soccer Mode On

set to automatically.Stadium

✎If you turn the TV off while watching , the Soccer Mode Soccer

Mode will be disable.

Support Menu

Self Diagnosis

■

Picture Test: Use to check for picture problems.

■

Sound Test: Use the built-in melody sound to check for sound

problems.

■

Signal Information for Ecuador, Panama, Others (ISDB-T, DVB-T) :

(digital channels only) An HD channel’s reception quality is either

perfect or the channels are unavailable. Adjust your antenna to

increase signal strength.

■

Reset: Reset all settings to the factory defaults.

✎The PIN input screen appears before the setup screen.

✎Enter your 4-digit PIN. Change the PIN using the Change PIN

option.

Software Update

The menu lets you upgrade your TV’s software to the Software Update

latest version.

✎When software is upgraded, video and audio settings you have

made will return to their default settings. We advise you to write

down your settings so that you can easily reset them after the

upgrade.

■

Update now: Insert a USB drive containing the ﬁrmware upgrade ﬁle,

downloaded from “www.samsung.com” into the TV.

✎Please be careful not to disconnect the power or remove the USB

drive until upgrades are complete. The TV will be turned off and

on automatically after completing the firmware upgrade.

Use Mode

Select the suitable for your place. We strongly recommend Use Mode

you select .Home Use

✎If your TV has been unintentionally set to , you can Store Demo

change the mode with this option.

■

Home Use Home Use: is the default setting.

■

Store Demo Store Demo: is for retail environments only. If you select

Store Demo, some functions will not work, and the picture settings

will be reset every 30 minutes.

Contact Samsung

View this information when your TV does not work properly or when you

want to upgrade the software. You can ﬁnd information regarding our call

centers and how to download products and software.

Other Information

Installing the Wall Mount

Wall or Ceiling Mounting

If you mount this product on a wall, it should be mounted only as

recommended by the manufacturer. Unless it is correctly mounted,

the product may slide or fall, causing serious injury to a child or adult,

and serious damage to the product.

Installing the Wall Mount Kit

The wall mount kit (sold separately) lets you mount the TV on the

wall. For detailed information about installing the wall mount, see the

instructions provided with the wall mount. Contact a technician for

assistance when installing the wall mount bracket. Samsung Electronics

is not responsible for any damage to the product or injury to yourself or

others if you elect to install the wall mount on your own.

Wall Mount Kit Speciﬁcations (VESA)

Install your wall mount on a solid wall perpendicular to the ﬂoor. Before

attaching the wall mount to surfaces other than plaster board, please

contact your nearest dealer for additional information. If you install the TV

on a ceiling or slanted wall, it may fall and result in severe personal injury.

✎NOTE

xStandard dimensions for wall mount kits are shown in the table below.

xSamsung wall mount kits contain a detailed installation manual and all parts

necessary for assembly are provided.

xDo not use screws that do not comply with the VESA standard screw

specifications.

xDo not use screws that are longer than the standard length or do not comply

with the VESA standard screw specifications. Screws that are too long may

cause damage to the inside of the TV set.

xFor wall mounts that do not comply with the VESA standard screw

specifications, the length of the screws may differ depending on the wall

mount specifications.

xDo not fasten the screws too firmly. This may damage the product or cause

the product to fall, leading to personal injury. Samsung is not liable for these

kinds of accidents.

xSamsung is not liable for product damage or personal injury when a non-VESA

or non-specified wall mount is used or the consumer fails to follow the product

installation instructions.

xDo not mount the TV at more than a 15 degree tilt.

xAlways have two people mount the TV on a wall.

Product Family VESA Spec. (A * B) Standard ScrewInches Quantity

PDP-TV 43 M8400 X 400 4

Do not install your Wall Mount Kit while

your TV is turned on. It may result in

personal injury due to electric shock.

✎Remove the screws in the mounting holes before you install the wall

mount.

Securing the TV to the Wall

Caution: Pulling, pushing, or climbing onto the TV may cause the

TV to fall. In particular, ensure that your children do not hang over or

destabilize the TV; doing so may cause the TV to tip over, resulting in

serious injuries or death. Follow all safety precautions provided on the

included Safety Flyer. For added stability, install the anti-fall device for

safety purposes, as follows.

To avoid the TV from falling

✎Since the necessary clamps, screws, and string are not supplied,

please purchase these additionally.

1. Drive the screws into the clamps and ﬁrmly fasten them onto the wall.

Make sure the screws are ﬁrmly ﬁxed into the wall.

2. Remove the screws from the center back of the TV, put the screws into

the clamps, and then fasten the screws onto the TV again.

3. Connect the clamps ﬁxed onto the TV and the clamps ﬁxed onto the

wall with a strong string and then tie the string tightly.

✎Verify all connections are properly secured. Periodically check

connections for any sign of fatigue for failure. If you have any doubt

about the security of your connections, contact a professional

installer.

✎Install the TV near to the wall so that it does not fall backwards.

✎It is safe to connect the string so that the clamps fixed on the wall

are equal to or lower than the clamps fixed on the TV. Untie the

string before moving the TV.

Kensington Lock

The Kensington Lock is not supplied by Samsung. It is a device used

to physically ﬁx the system when using it in a public place. Refer to the

manual provided with the Kensington Lock for additional information on

proper use.

✎Please find a “

” icon on the rear of the TV. The Kensington slot is

beside the “

” icon.

✎The position and color may differ depending on the model.

Troubleshooting

If the TV seems to have a problem, ﬁrst review this list of possible problems and solution. If none of these troubleshooting tips apply, visit samsung.com,

then click on Support, or call Samsung customer service.

Issues Solutions and Explanations

Poor picture First of all, please perform the Picture Test and conﬁrm that your TV is properly displaying the test image.

ygo to - - MENU Support Self Diagnosis - Picture Test

If the test image is properly displayed, the poor picture may be caused by the source or signal.

The TV image does not look as good as it did in

the store.

yIf you have an analog Cable/Set top box, upgrade to a digital set top box. Use HDMI or Component cables to deliver SD

(Standard deﬁnition) picture quality.

yCable/Satellite subscribers: Try digital stations from the channel line up.

yAir/Cable Antenna connection: Try digital stations after performing Auto program.

yAdjust the Cable/Set top box video output resolution to 480p.

The picture is distorted: macroblock error, small

block, dots, pixelization.

yCompression of video contents may cause picture distortion, especially in fast moving pictures such as sports and

action movies.

yLow signal level can cause picture distortion. This is not a TV problem.

yMobile phones used close to the TV (up to 3.3 ft) may cause noise in picture on analog and digital TV.

Color is wrong or missing. yIf you’re using component connection, make sure the component cables are connected to the correct jacks. Incorrect or

loose connections may cause color problems or a blank screen.

There is poor color or brightness. yAdjust the Picture options in the TV menu. (go to / / / ) Picture Mode Color Brightness Sharpness

yAdjust Energy Saving option in the TV menu (go to - - - )MENU System Eco Solution Energy Saving

yTry resetting the picture to view the default picture setting. (go to - - )MENU Picture Reset Picture

There is a dotted line on the edge of the screen. yIf the picture size is set to , change it to .Screen Fit 16:9

yChange cable/Set top box resolution.

The picture is black and white. yIf you are using an AV composite input, connect the video cable (yellow) to the Green jack of component input 1 on the

TV.

When changing channels, the picture freezes or is

distorted or delayed.

yIf connected to a cable box, please try to reset it. (reconnect the AC cord and wait until the cable box reboots. It may

take up to 20 minutes)

ySet output resolution of the cable box to 480p.

Sound Problem yFirst of all, please perform the Sound Test to conﬁrm that your TV audio is properly operating.

ygo to - - - MENU Support Self Diagnosis Sound Test

yIf the audio is OK, the sound problem may be caused by the source or signal.

There is no sound or the sound is too low at

maximum volume.

yPlease check the volume of the device (Cable/Sat Box, DVD, Blu-ray etc) connected to your TV.

The picture is good but there is no sound. yIf you are using an external device, check the device’s audio output option (ex. you may need to change your cable box’s

audio option to HDMI when you have a HDMI connected to your TV).

yReboot the connected device by reconnecting the device’s power cable.

The speakers are making an inappropriate noise. yCheck the cable connections. Make sure a video cable is not connected to an audio input.

yFor Antenna or Cable connections, check the signal information. Low signal level may cause sound distortion.

yPerform the Sound Test as explained above.

No Picture, No Video

The TV will not turn on. yMake sure the AC power cord is securely plugged into the wall outlet and the TV.

yMake sure the wall outlet is working.

yTry pressing the button on the TV to make sure the problem is not the remote control. If the TV turns on, refer POWER

to ‘Remote control does not work’ below.

The TV turns off automatically. yEnsure the is set to in the menu.Sleep Timer Off System

yMake sure the AC power cord is plugged in securely to the wall outlet and the TV.

yWhen watching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes if there is no signal.

Issues Solutions and Explanations

There is no picture/video. yCheck cable connections. (remove and reconnect all cables connected to the TV and external devices).

ySet your external device’s (Cable/Set top box, DVD, Blu-ray etc) video outputs to match the connections to the TV input.

For example, if an external device’s output is HDMI, it should be connected to an HDMI input on the TV.

yMake sure your connected devices are powered on.

yBe sure to select the TV’s correct source by pressing the button on the remote control.SOURCE

yReboot the connected device by reconnecting the device’s power cable.

Antenna(Air / Cable) Connection

The TV is not receiving all channels. yMake sure the coaxial cable is connected securely.

yPlease try or Auto Program Auto Tuning to add available channels to the channel list.

yVerify the Antenna is positioned correctly.

No Caption on digital channels. yCheck setup menu.Caption

ySome channels may not have caption data.

The picture is distorted: macroblock, error, small

block, dots, pixelization.

yCompression of video contents may cause picture distortion, especially on fast moving pictures such as sports and

action movies.

yA low signal can cause picture distortion. This is not a TV problem.

Others

Purple/green rolling horizontal bars and buzzing

noise from the TV speakers with Component cable

connection.

yRemove the left and right audio connections from the set-top-box. If the buzzing stops, this indicates that the set-top-

box has a grounding issue. Replace the Component video cables with an HDMI connection.

The picture will not display in full screen. yHD channels will have black bars on either side of the screen when displaying up scaled SD (4:3) contents.

yBlack bars on Top & Bottom will be shown on movies that have aspect ratios different from your TV.

yAdjust picture size option on your external device or TV to full screen.

Plasma TV is making humming noise. yPlasma TVs typically make a soft humming sound. This is normal. It’s caused by the electrical charges that are used to

create the images on the screen.

yIf the humming sound is loud, you may have set the brightness on the TV too high. Try setting the brightness lower.

yYou can also have loud humming if the back of your Plasma TV is too close to a wall or other hard surface. Also try

rerouting your connection cables.

yImproper installation of wall mount can create excessive noise.

Image Retention (Burn In) Issue. yTo minimize the possibility of screen burn, this unit is equipped with Pixel Shift screen burn reduction technology. Pixel

Shift lets you set the picture so it moves slightly up and down (Vertical Line) and side to side (Horizontal Dot). The

regular, slight movement of the picture reduces screen burn in.

The remote control does not work. yReplace the remote control batteries with correct polarity (+/–).

yClean the transmission window located on the top of the remote control.

yTry pointing the remote control directly at the TV from 5~6 feet away.

The cable/set top box remote control does not

turn the TV on or off, or adjust the volume.

yProgram the Cable/Set top box remote control to the operate the TV. Refer to the Cable/Set top box user manual for

SAMSUNG TV code.

A “ ” message appears. Mode Not Supported yCheck the supported resolution of the TV and adjust the external device’s output resolution accordingly. Refer to

resolution settings in this manual.

Caption on the TV menu is greyed out. yCaption can not be selected in the TV menu when connected via HDMI or Component.

yCaption must be activated on the external device.

There is a plastic smell from the TV. yThis smell is normal and will dissipate over time.

TV is unavailable in the Signal Information Self

Diagnosis Test menu.

yThis function is only available with digital channels from an Antenna / RF / Coax connection.

TV is tilted to the right or left side. yRemove the stand base from the TV and reassemble it.

The menu is grey out (unavailable). Broadcasting yThe menu is only available when you select the TV source.Broadcasting

Your settings are lost after 30 minutes or every

time the TV is turned off.

yIf TV is in the mode, it will reset audio and picture settings every 30 minutes. If you want to change the Store Demo

settings from mode to , press the button to select mode, and go to Store Demo Home Use SOURCE TV MENU →

Support Use Mode →.

You have intermittent loss of audio or video. yCheck the cable connections and reconnect them.

yLoss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are ﬂexible enough for

long term use. If mounting the TV to the wall, we recommend using cables with 90 degree connectors.

The menu is not available. PIP yPIP functionality is only available when you are using a HDMI or components source.

You see small particles when you look closely at

the edge of the frame of the TV.

yThis is part of the product’s design and is not a defect.

POP (TV’s internal banner ad) appears on the

screen.

yGo to , and then select .MENU →Support →Use Mode Home Use

The message “This ﬁle may not be played

properly.” appears.

yThis may appear because of high bit rate of content. Content generally will play but could experience some playability

issue.

✎Some functions and pictures shown in this manual are available on specific models only.

✎You can keep your TV as optimum condition to upgrade the latest firmware on web site (samsung.com Support) by USB.→

■

Pixel Shift: Using this function, you can minutely move pixels on the

PDP in horizontal or vertical direction to minimize after image on the

screen.

✎Optimum condition for pixel shift

Available Settings TV / HDMI

Horizontal 0~4(pixels) 4

Vertical 0~4(pixels) 4

Time (minute) 1~4 min 4 min

✎The value may differ depending on the monitor size Pixel Shift

(inches) and mode.

✎This function is not available in the mode.Screen Fit

■

Auto Protection Time: If the screen remains idle with a still image

for a certain period of time deﬁned by the user, the screen saver is

activated to prevent the formation of ghost images on the screen.

■

Scrolling: This function removes after-images on the screen by

moving all the pixels on the PDP according to a pattern. Use this

function when there are remaining after images or symbols on the

screen, especially when you displayed a still image on the screen for

a long time.

✎The after-image removal function has to be executed for a long

time (approximately 1 hour) to effectively remove after-images on

the screen. If the after-image is not removed after performing the

function, repeat the function again.

✎Press any key on the remote control to cancel this feature.

■

Side Gray: When you watch TV with the screen ratio set to 4:3, the

screen is prevented from any damage by adjusting the white balance

on both extreme left and right sides.

General

■

Game Mode: When connecting to a game console such as

PlayStation™ or Xbox™, you can enjoy a more realistic gaming

experience selecting the game menu.

✎Precautions and limitations for game mode

xTo disconnect the game console and connect another external

device, set to in the setup menu.Game Mode Off

xIf you display the TV menu in , the screen shakes Game Mode

slightly.

xGame Mode is not available when you’ve set the input source

to .TV

xAfter connecting the game console, set to . Game Mode On

Unfortunately, you may notice reduced picture quality.

xIf is :Game Mode On

−Picture Mode Standard Sound Mode is set to and is set to

Movie.

■

Panel Lock: Lock or unlock all the keys on the panel.

■

Boot Logo: Enable/disable displaying the logo while the TV starts up.

■

AV Color System for Ecuador, Panama, Others (ISDB-T, DVB-T) :

Normally the TV can receive image and sound with good quality

when in the mode . This mode detects the signal color Auto

system automatically. In case of some signal reception with color

unsatisfactory, select the AV Color System PAL-M PAL-N Mode to ,

or .NTSC

✎Available only in AV mode.

Change PIN

The screen will appear. Choose any 4 digits for your Change PIN

PIN and enter it in the . Re-enter the same 4 digits in Enter New PIN

the . When the Conﬁrm screen appears, press the Conﬁrm New PIN

ENTER

button. Your PIN has been memorized.

✎The PIN input screen appears before the setup screen. Enter your

4-digit PIN, the default of which is 0-0-0-0.

✎If you forget the PIN code, press the remote control buttons in the

following sequence in Standby mode, which resets the PIN to “0-0-

0-0” : 8 2 4 (on)MUTE → → → → POWER

DivX® Video On Demand

Shows the registration code authorized for the TV. If you connect to

the DivX web site and register with 10-digit registration code, you can

download the VOD activation ﬁle. Once you play it using Media Play, the

registration is completed.

✎For more information on DivX® VOD, visit “http://vod.divx.com”.

Applications Menu

Using the Source List

Source List

When you press the button, screen will be displayed SOURCE Source

at once.

✎You can only choose external devices that are connected to the TV.

In , connected inputs are highlighted.Source

✎For the detailed information, refer to “Changing the Input Source”.

Using the Media Play

Connecting a USB Device

1. Turn on your TV.

2. Connect a USB device containing photo, music and movie ﬁles to the

USB port on the side of the TV.

3. When USB is connected to the TV, popup window appears. You can

select the , or directly.Photos Videos Music

✎It might not work properly with unlicensed multimedia files.

✎Need-to-Know List before using Media Contents

xMTP (Media Transfer Protocol) is not supported.

xSupported file systems are FAT and exFAT.

xCertain types of USB Digital camera and audio devices may not be compatible

with this TV.

xMedia Contents only supports sequential jpeg format.

xMedia Contents only supports USB Mass Storage Class (MSC) devices.

xMSC is a Mass Storage Class Bulk-Only Transport device. Examples of MSC

are Thumb drives, Flash Card Readers (USB HUB are not supported). Devices

should be connected directly to the TV’s USB port.

xBefore connecting your device to the TV, please back up your files to prevent

them from damage or loss of data. SAMSUNG is not responsible for any data

file damage or data loss.

xThe HDD (Hard Disk Drive) connected to USB is not supported.

xDo not disconnect the USB device while it is loading.

xThe higher the resolution of the image, the longer it takes to display on the

screen.

xThe maximum supported JPEG resolution is 15360 x 8640 pixels.

xFor unsupported or corrupted files, the “Not Supported File Format” message

is displayed.

xThe scene search and thumbnail functions are not supported in the .Videos

xMP3 files with DRM that have been downloaded from a non-free site cannot

be played. Digital Rights Management (DRM) is a technology that supports

the creation, distribution and management of the content in an integrated and

comprehensive way, including the protection of the rights and interests of the

content providers, the prevention of the illegal copying of contents, as well as

managing billings and settlements.

xPTP connection mode is fully available only with digital cameras. When

connecting a smartphone or tablet to the TV using PTP mode, it may not be

recognized.

xA USB device that requires high power (more than 500mA or 5V) may not be

supported.

xIf the TV has been no input during time set in , the Auto Protection Time

screen saver will run.

xThe power-saving mode of some external hard disk drives may be released

automatically when connected to the TV.

xIf a USB extension cable is used, the USB device may not be recognized or

the files on the device may not be read.

xIf a USB device connected to the TV is not recognized, the list of files on the

device is corrupted or a file in the list is not played, connect the USB device to

the PC, format the device and check the connection.

xIf a file deleted from the PC is still found when Media Contents is run, use the

“Empty the Recycle Bin” function on the PC to permanently delete the file.

xIf the number of files and folders saved on a USB storage device is

approximately over 4000, the files and folders may not appear and some

folders may not be opened.

Disconnecting a USB Device

1. Press the SOURCE button.

2. Select a desired USB device, and then press the button. The TOOLS

Tools menu appears.

3. Remove USBSelect , and then wait until the selected USB device is

disconnected. You can remove a USB device from the TV.

✎To remove a USB device from the TV, we recommend use Remove

USB function.

Using the Media Contents

Enjoy photos, music and movie ﬁles saved on a USB Mass Storage Class

(MSC) device.

1. Press the MEDIA.P button.

2. Press button to select desired menu ( ), ◄/► Photos, Videos, Music

then press the ENTER

button.

3. Press button to select desired device, then press the ◄/► ENTER

button again.

4. Press the button to select the desired ﬁle in the list, then ▲/▼/◄/►

press the ENTER

button or (Play) button.

Playing the selected ﬁles

1. OptionsPress the button to select ▲ at the top of each main screen

and select .Play Selected

2. Select the desired ﬁles.

✎The check box appears to the left of the selected files.

✎Press ENTER

button again to deselect the file.

3. PlayPress the button to select ▲.

✎You can select or deselect all files pressing the Select All / Deselect

All.

Playing the Photos / Videos / Music

During playing a ﬁle, press the button to select the desired ▲/▼/◄/►

menu.

✎When the option menu is not displayed, press the button or TOOLS

ENTER

button.

✎You can also use

buttons on the remote control

during playback.

✎If you press the button during playback, you can view the INFO

playback information.

Playback menu

Button Operation Photos Videos Music

/ Previous / Next ●

/ Start Slide Show / Stop

Slide Show ●

Play / Pause Mini

Player* ● ●

/ Previous / Next Mini

Player* ● ●

/ Rewind / Fast forward ● ●

* When setting the to in , these buttons Background Music Mini Player Photos

appear.

Setting menu

■

Photos

Button Operation

Slideshow

Settings

You can set the and during the Speed Effects

slide show.

Zoom You can zoom into images in full screen mode.

Rotate You can rotate images in full screen mode.

Background Music

/ Mini Player

You can set background music when watching

a slide show. / You can control simple playback

menus.

Settings

Picture Mode / Sound Mode: You can adjust the

picture or sound setting.

Information: You can see detailed information

about the played ﬁle.

✎During the slide show, all files in the file list will be displayed in order.

✎When you press the (Play) button (or button ▲ → Options →

Slide Show) in the file list, slide show will be started immediately.

✎During the slide show, you can adjust the slide show speed using

(REW) or (FF) button.

xSupported Photo Formats

File Extension Type Resolution

*.jpg / *.jpeg JPEG 15360 X 8640

*.bmp BMP 4096 X 4096

*.mpo MPO 15360 X 8640

✎The MPO type file does not support , and Zoom Rotate Effects

functions.

■

Videos

Button Operation

Search Search Titles: You can move the other ﬁle directly.

Search Time bar: You can search the video using ◄

and button at one minute interval or entering the ►

number directly.

✎It may not be supported depending on the

input source.

Repeat Mode You can play movie ﬁles repeatedly.

Picture Size You can adjust the picture size to your preference.

Settings Subtitle Settings: You can play the video with

subtitles. This function only works if the subtitles are

the same ﬁle name as the video.

Picture Mode / Sound Mode: You can adjust the

picture or sound setting.

Audio Language: You can change the audio language

if the video has more than one language.

Information: You can see detailed information about

the played ﬁle.

✎If video time information is unknown, play time and progress bar are

not displayed.

✎In this mode, you can enjoy movie clips contained on a Game, but

you cannot play the Game itself.

xSupported Video Formats

File

Extention Container Video Codec Resolution Frame rate

(fps)

Bit rate

(Mbps)

Audio

Codec

*.avi / *.mkv

*.asf /

*.wmv

*.mp4 /

*.3gp

*.vro /

*.mpg

*.mpeg

/ *.ts

*.tp / *.trp

*.mov / *.ﬂv

*.vob / *.svi

*.divx

AVI

MKV

ASF

MP4

3GP

MOV

FLV

VRO

VOB

DivX 3.11/4/5/6

1920 x 1080

6~30

AC3

LPCM

ADPCM

(IMA, MS)

AAC

HE-AAC

WMA

DD+

MPEG

(MP3)

DTS (Core)

G.711(A-

Law,

μ-Law)

MPEG4 SP/

ASP

H.264 BP/

MP/HP

Motion JPEG 640 x 480 8

Window Media

Video v9

1920 x 1080 30MPEG2

MPEG1

✎Other Restrictions

xVideo content will not play, or not play correctly, if there is an error in the content

or the container.

xSound or video may not work if the contents have a standard bit rate/frame rate

above the compatible Frame/sec listed in the table.

xIf the Index Table is in error, the Seek (Jump) function is not supported.

xSome USB/digital camera devices may not be compatible with the player.

xThe menu can be displayed late if the video is over 10Mbps(bit rate).

Video decoder Audio decoder

ySupports up to H.264, Level 4.1 (FMO/

ASO/RS are not supported.)

yframe rate :

- Below 1280 x 720: 60 frame max

- Above 1280 x 720: 30 frame max

yVC1 AP L4 is not supported.

yGMC 2 or higher is not supported.

yWMA 10 Pro supports up to 5.1

channel and M2 proﬁle.

yWMA lossless audio is not supported.

yVorbis supports up to 2ch.

yDD+ supports up to 5.1 channel.

xSupported Subtitle Formats

External

Name File extension

MPEG-4 timed text .ttxt

SAMI .smi

SubRip .srt

SubViewer .sub

Micro DVD .sub or .txt

SubStation Alpha .ssa

Advanced

SubStation Alpha .ass

Powerdivx .psb

Internal

Name Container Format

Xsub Picture FormatAVI

SubStation Alpha MKV Text Format

Advanced

SubStation Alpha MKV Text Format

SubRip MKV Text Format

MPEG-4 Timed

text MP4 Text Format

■

Music

Button Operation

Repeat You can play music ﬁles repeatedly.

Shufﬂe You can play the music randomly.

Sound Mode You can adjust the sound setting.

Storage and Maintenance

✎If you attached some stickers on the TV screen, it remains some debris after removing the sticker. Please clean it to watch TV.

✎The exterior and screen of the product can get scratched during cleaning. Be sure to wipe the exterior and screen carefully using a soft cloth to

prevent scratches.

Do not spray water directly onto the

product. Any liquid that goes into the

product may cause a failure, ﬁre, or electric

shock.

Clean the product with a soft cloth

dampened with in a small amount of

water. Do not use a ﬂammable liquid

(e.g. benzene, thinners) or a cleaning

agent.

License

DivX Certiﬁed® to play DivX® video up to HD 1080p, including premium content.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an ofﬁcial DivX Certiﬁed® device that plays DivX video.

Visit divx. com for more information and software tools to convert your ﬁles into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certiﬁed® device must be

registered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go

to vod. divx.com for more information on how to complete your registration. Covered by one or more of the following U.S. patents : 7,295,673; 7,460,668; 7,515,710;

7,519,274 DivX®, DivX Certiﬁed® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing Limited. DTS, the Symbol, & DTS and the Symbol

The terms HDMI and HDMI High-Deﬁnition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing

LLC in the United States and other countries.

Open Source License Notice

In the case of using open source software, Open Source Licenses are available on the product menu. Open Source License Notice is written only English.

Speciﬁcations

Environmental Considerations

Operating Temperature

Operating Humidity

Storage Temperature

Storage Humidity

10°C to 40°C (50°F to 104°F)

10% to 80%, non-condensing

-20°C to 45°C (-4°F to 113°F)

5% to 95%, non-condensing

Model Name PN43H4000

Display Resolution 852 x 480