Samsung UA40H5141AK Bruksanvisning
Läs nedan 📖 manual på svenska för Samsung UA40H5141AK (125 sidor) i kategorin Tv. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/125
▶
❑Using the INFO button (Now & Next guide)
The display identifies the current channel and the status of certain audio-video
settings.
The Now & Next guide shows daily TV programme information for each channel
according to the broadcasting time.
NWhen you press the button, a channel information banner will appear INFO
on the top of the screen. And then press the ENTERE button, you can see
the details of the programme.
●Scroll ◄, ► to view information for a desired programme while watching
the current channel.
●Scroll ▲, ▼ to view information for other channels.
English
◀ ▶
❑Memorizing channels
■Aerial
OMENUm → Broadcasting → Aerial → ENTERE
Before your television can begin memorising the available channels, you must
specify the type of signal source that is connected to the TV.
English
◀ ▶
■Auto Tuning
(depending on the country)
OMENUm → Broadcasting → Auto Tuning → ENTERE
NAutomatically allocated programme numbers may not correspond to actual
or desired programme numbers. If a channel is locked, the PIN input window
appears.
●Auto Tuning
Aerial (Air/Cable): Select the aerial source to memorise.
NWhen selecting , scans for a channel automatically and stores in the Air
TV.
Channel Type (Digital & Analogue / Digital / Analogue): Select the channel
source to memorise.
Channel Ordering (depending on the country): Select the channel order type.
English
◀ ▶
When selecting Cable → , or Digital & Analogue Digital Analogue
–Operator Selection (depending on the country): Selects a provider of
cable services.
–Search Mode: Scans for all channels with active broadcast stations and
stores them in the TV.
NIf you select , you can set up the , , Quick Network Network ID
Frequency Modulation Symbol Rate, and manually by pressing the
button on the remote control.
–Network Network ID Auto Manual: Selects the setting mode among or .
●Network ID Network Manual Network ID: When is , you can set up
using the numeric buttons.
English
◀ ▶
●Frequency: Displays the frequency for the channel (differs in each
country).
●Modulation: Displays available modulation values.
●Symbol Rate: Displays available symbol rates.
●Cable Search Option
(depending on the country & cable channels only)
Sets additional search options such as the frequency and symbol rate for a
cable network search.
Start Frequency / Stop Frequency: Set the start or stop frequency (differs in
each country).
Symbol Rate: Displays available symbol rates.
Modulation: Displays available modulation values.
English
◀ ▶
❑Using the Channel menu
O
MENUm → Broadcasting → Channel List → ENTERE
■Channel List
The contains the channels your TV displays when you press the Channel List
channel button. You can view channel information, , , , , All TV Radio Data/Other
Analogue Favourites 1-5 or .
Press ► ( ) button to change the channel mode, or press Mode ◄ ( ) Sorting
button to change the channel order according to channel number or name on the
list.
NWhen you press the button on the remote control, CH LIST Channel List
screen will be displayed at once.
English
◀ ▶
Channel Sorting
●
Number Name / : Arranges the channel order according to channel number or
name on the list.
Channel Mode
●Aerial Air Cable: Switches to or .
●Edit Favourites: Set channels you watch frequently as favourites.
NFor detailed information about using , refer to “Edit Favourites Edit
Favourites”.
●Favourites 1-5: Shows all favourite channels, arranged in up to five groups.
Each group has a separate screen.
NThe TV displays only if you have added favourites using Favourites 1-5
Edit Favourites.
English
◀ ▶
●All: Shows all currently available channels.
●TV: Shows all currently available TV channels.
●Radio: Shows all currently radio channels.
●Data/Other: Shows all currently available MHP or other channels.
●Analogue: Shows all currently available analogue channels.
English
◀ ▶
■Guide
O
MENU
m
→ Broadcasting → Guide → ENTER
E
The EPG (Electronic Programme Guide) information is provided by broadcasters.
Using programme schedules provided by broadcasters, you can specify
programmes you want to watch in advance so that the channel automatically
changes to the selected programme channel at the specified time. Programme
entries may appear blank or out of date depending on a channel status.
●a Red ( ): Viewing the TV programmes on the list quickly using Quick Nav
▲/▼/◄/► buttons.
●b Green ( ): Select the type of channels you want to Channel Category
display.
●{ Yellow ( ): Moves to the reserved programmes in Schedule Manager
Schedule Manager.
English
◀ ▶
■Schedule Manager
O
MENU
m
→ Broadcasting → Schedule Manager → ENTER
E
You can set a desired channel to be displayed automatically at the intended time.
In addition, you can view, modify or delete a channel you have reserved to watch.
NYou must set the current time first using the Time → function in the Clock
System menu to use this function.
1. Press the on the screen. The Schedule Schedule Manager Schedule
Viewing menu appears.
2. Press the ▲/▼/◄/► buttons to set each option menu.
●Aerial: Select the desired broadcasting signal.
●Channel: Select the desired channel.
English
◀ ▶
●Repeat Once Manual Sat~Sun Mon~Fri Everyday: Select , , , or to set at
your convenience. If you select , you can set the day you want.Manual
NThe (c) mark indicates the day you’ve selected.
●Date: You can set the desired date.
NIt is available when you select in .Once Repeat
●Start Time: You can set the start time you want.
NIf you want to edit or cancel a reserved schedule, select the reserved
schedule on . Then press the Schedule Manager ENTERE button and
select the or .Edit Delete
English
◀ ▶
■Edit Channel
O
MENU
m
→ Broadcasting → Edit Channel → ENTER
E
You can edit or delete channels.
1. Go to Edit Channel screen.
2. Press the ▲/▼ buttons to select the desired channel, then press the
ENTERE button. The (c) mark indicates the channel you’ve selected.
NYou can select more than one channel.
NPress the ENTERE again to deselect the channel.
English
◀ ▶
NUsing the coloured and function buttons with the .Edit Channel
●a
Red ( ): Changes channel order on the channel list. Change Number
–E ( ): Completes changing the channel order.Done
NDigital channel does not support this function when the Edit Channel
Number Disable(depending on the country) is set to .
●b Green ( ): Deletes a channel from the channel list.Delete
●{ Yellow ( ): Lock a channel so that the channel cannot be Lock / Unlock
selected and viewed. / Unlock the channel that you locked.
NThis function is available only when the is set to .Channel Lock On
NThe PIN input screen appears. Enter your 4-digit PIN. Change the
PIN using the option.Change PIN
English
◀ ▶
●} Blue ( ): Selects or deselects all channels at Select All / Deselect All
once.
● (Go To): Goes to channel directly by pressing numbers (0~9).
●k ( ): Moves to previous or next page.Page
●T (Tools): Displays the option menu. The option menu items that appear
may differ depending on the channel status and type.
–Sorting (digital channels only): Changes the list ordered by channel
number or channel name.
–Aerial: Selects the desired broadcasting signal.
English
◀ ▶
–Category All TV Radio Data/Other : Change the channel mode to , , , ,
Analogue Recently Viewed Most Viewed, , . The selected channel
mode is displayed.
–Edit Favourites Edit Favourites : Go to screen directly.
–Rename channel (analogue channels only): Assign a name of up to
five characters to a channel. For example, Food, Golf, etc. This makes
it easier to find and select the channel.
–Channel Info: Display details of the selected channel.
–Information: Display details of the selected programme.
English
◀ ▶
■Edit Favourites t
O
MENU
m
→ Broadcasting → Edit Favourites → ENTER
E
You can add, edit or delete favourite channels.
1. Go to Edit Favourites screen.
2. Press the ▲/▼ buttons to select the desired channel, and then press
ENTERE button.
3. Choose a specific favourite list among using Favourites 1-5 b (Change Fav.)
button, and then press the } ( ) button. The selected channel has been Add
added in .Favourites 1-5
NOne favourite channel can be added in several of favourites among
Favourites 1-5.
English
◀ ▶
NUsing the coloured and function buttons with the .Edit Favourites
●a
Red (Category / Change order)
–Category All TV Radio Analogue: Changes the channel mode to , , , ,
Data/Other Recently Viewed Most Viewed, , . The selected channel
mode is displayed.
–Change order: Changes the favourite channel order.
–E ( ): Completes changing the channel order.Done
English
◀ ▶
●b Green (Change Fav. Favourites 1-5): Changes favourite list among .
●{
Yellow ( ): Selects or deselects all channels at Select All / Deselect All
once.
●} Blue ( )Add / Delete
–Add Favourites 1-5: Adds selected channels to .
–Delete: Deletes the favourite channel from .Favourites 1-5
English
◀ ▶
● (Go To): Goes to channel directly by pressing numbers (0~9).
●k ( ): Moves to previous or next page.Page
●T (Tools): Displays the option menu. The option menu items that appear
may differ depending on the channel status and type.
–Copy to Favourites Favourites : Edit the selected favourite channel in
1-5.
–Rename Favourites: Assign your own favourite channel name.
–Aerial: Select the desired broadcasting signal.
–Edit Channel Edit Channel: Go to screen directly.
–Information: Display details of the selected programme.
English
◀ ▶
❑Locking Programme
■Programme Rating Lock
(depending on the country)
OMENUm → Broadcasting → Programme Rating Lock → ENTERE
Prevent unauthorised users, such as children, from watching unsuitable
programme with a user-defined 4-digit PIN code. If the selected channel is
locked, the “\” symbol will be displayed.
NThe items of Programme Rating Lock differs depending on the country.
English
◀ ▶
■Channel Lock
O
MENU
m
→ Broadcasting → Channel Lock → ENTER
E
Lock channels in Channel menu to prevent unauthorised users, such as children,
from watching unsuitable programme.
NAvailable only when the Source TV is set to .
English
◀ ▶
❑Other Features
■Channel Settings
OMENUm → Broadcasting → Channel Settings → ENTERE
●Country (Area)
(depending on the country)
The PIN input screen appears. Enter your 4 digit PIN number.
Digital Channel: Change the country for digital channels.
Analogue Channel: Change the country for analogue channels.
English
◀ ▶
●Manual Tuning
Scans for a channel manually and stores in the TV.
NIf a channel is locked, the PIN input window appears.
NAccording to the channel source, Manual Tuning may be supported.
●Digital Channel Tuning: Scans for a digital channel manually and stores
in the TV. Press the button to search the digital channels. When New
scanning has finished, a channel is updated in the channel list.
–When selecting Aerial → : , Air Channel Frequency Bandwidth,
–When selecting Aerial → : Cable Frequency Modulation Symbol , ,
Rate
English
◀ ▶
●Analogue Channel Tuning: Scans for an analogue channel. Press the
New button to search the channels by adjusting the Programme Colour ,
System Sound System Channel Search, , , .
NChannel mode
–P (programme mode): When tuning is complete, the broadcasting
stations in your area have been assigned to the position numbers
from P0 to P99. You can select a channel by entering the position
number in this mode.
–C S (aerial channel mode) / (cable channel mode): These two
modes allow you to select a channel by entering the assigned
number for each aerial broadcasting station or cable channel.
English
◀ ▶
●Fine Tune
(analogue channels only)
If the signal is weak or distorted, fine tune the channel manually.
NFine tuned channels are marked with an asterisk “*”.
NTo reset the fine-tuning, select .Reset
●Transfer Channel List
(depending on the country)
Imports or exports the channel map. You should connect a USB storage to
use this function.
NThe PIN number input screen appears. Enter your 4 digit PIN number.
NSupported file systems are FAT and exFAT.
●Delete CAM Operator Profile: Selects the CAM operator to delete.
English
◀ ▶
■Subtitle t
O
MENU
m
→ Broadcasting → Subtitle → ENTER
E
Use this menu to set the mode.Subtitle
●Subtitle: Switches subtitles on or off.
●Subtitle Mode: Sets the subtitle mode.
●Subtitle Language: Sets the subtitle language.
NIf the programme you are watching does not support the Hearing
Impaired Normal Hearing function, automatically activates even if the
Impaired mode is selected.
English
◀ ▶
NEnglish is the default in cases where the selected language is unavailable
in the broadcast.
●Primary Subtitle: Sets the primary subtitle.
●Secondary Subtitle: Sets the secondary subtitle.
■Edit Channel Number (depending on the country)
OMENUm → Broadcasting → Edit Channel Number → ENTERE
Use this change channel number. When channel number is changed, channel
information is not updated automatically.
English
◀ ▶
■Audio Options
(digital channels only)
OMENUm → Broadcasting → Audio Options → ENTERE
●Audio Language t
Change the default value for audio languages.
Primary Audio / Secondary Audio: You can set the primary or secondary
audio.
NThe available language may differ depending on the broadcast.
English
◀ ▶
●Audio Format
When sound is emitted from both the main speaker and the audio receiver,
a sound echo may occur due to the decoding speed difference between
the main speaker and the audio receiver. In this case, use the TV Speaker
function.
NAudio Format option may differ depending on the broadcast. 5.1ch
Dolby digital sound is only available when connecting an external speaker
through an optical cable.
●Audio Description (not available in all locations)
This function handles the Audio Stream for the AD (Audio Description) which
is sent along with the Main audio from the broadcaster.
Audio Description: Turn the audio description function on or off.
Volume: Adjust the audio description volume.
English
◀ ▶
■Teletext Language
(depending on the country)
OMENUm → Broadcasting → Teletext Language → ENTERE
●Teletext Language
NEnglish is the default in cases where the selected language is unavailable
in the broadcast.
●Primary teletext / Secondary teletext
NPrimary teletext Secondary teletext and may not be supported in
some locations.
English
◀ ▶
■Digital Text
(UK only)
OMENUm → Broadcasting → Digital Text → ENTERE
If the programme broadcasts with digital text, this feature is enabled.
NMHEG (Multimedia and Hypermedia Information Coding Experts Group)
An International standard for data encoding systems used in multimedia and
hypermedia. This is at a higher level than the MPEG system which includes
data-linking hypermedia such as still images, character service, animation,
graphic and video files as well as multimedia data. MHEG is user runtime
interaction technology and is being applied to various fields including VOD
(Video-On-Demand), ITV (Interactive TV), EC (Electronic Commerce), tele
education, teleconferencing, digital libraries and network games.
English
◀ ▶
●Application Info: View information on the CAM inserted into the CI slot and
on the “CI or CI+ CARD” which is inserted into the CAM. You can install the
CAM anytime whether the TV is on or off.
1. Purchase a CI CAM module at your nearest dealer or by phone.
2. Firmly insert the “CI or CI+ CARD” into the CAM in the direction of the
arrow.
3. Insert the CAM with the “CI or CI+ CARD” into the common interface slot,
in the direction of the arrow so that it aligns parallel with the slot.
4. Check if you can see a picture on a scrambled signal channel.
English
◀ ▶
❑Changing the Preset Picture Mode
■Picture Mode t
OMENUm → Picture → Picture Mode → ENTERE
Select your preferred picture type.
NWhen connecting a PC, you can only make changes to the and Entertain
Standard.
●Dynamic: Suitable for a bright room.
●Standard: Suitable for a normal environment.
●Natural for LED 5 series 32" and above : Suitable for reducing eye strain.
●Movie: Suitable for watching movies in a dark room.
●Entertain: Suitable for watching movies and games.
NIt is only available when connecting a PC.
English
◀ ▶
❑Adjusting Picture Settings
■Samsung MagicAngle for LED 19", 22" models
OMENUm → Picture → Samsung MagicAngle → ENTERE
Adjust screen viewing Angle to optimise screen quality according to your viewing
position.
●Samsung MagicAngle: When viewing the screen at an angle from below or
above by setting the appropriate mode for each position, you can obtain a
similar picture quality as viewing the screen directly from the front.
English
◀ ▶
Off: Select when viewing from the front position.
Lean Back Mode: Select when viewing from a slightly lower position.
Standing Mode: Select when viewing from the upper position.
●Mode: Adjust screen viewing angle.
NWhen Samsung MagicAngle is set to or Lean Back Mode Standing Mode,
Gamma is not available.
English
◀ ▶
■Backlight for LED TV / Cell Light for PDP TV / Contrast / Brightness /
Sharpness / Colour / Tint (G/R)
Your television has several setting options for picture quality control.
NNOTE
●In analogue , , modes of the PAL system, the TV Ext. AV Tint (G/R)
function is not available.
●When connecting a PC, you can only make changes to
Backlight for LED TV / Cell Light for PDP TV , , and Contrast Brightness
Sharpness.
●Settings can be adjusted and stored for each external device connected
to the TV.
●Lowering picture brightness reduces power consumption.
English
◀ ▶
■Picture Size
O
MENU
m
→ Picture → Picture Size → ENTER
E
Set the various picture options such as picture size and aspect ratio.
NThe available items may differ depending on the selected mode.
NDepending on the input source, the picture size options may vary.
●Picture Size t: Your cable box/satellite receiver may have its own set
of screen sizes as well. However, we highly recommend you use 16:9 mode
most of the time.
Auto Wide: Automatically adjusts the picture size to the aspect ratio.16:9
16:9: Sets the picture to 16:9 wide mode.
English
◀ ▶
Wide Zoom: Magnifies the picture size more than 4:3.
N
Adjusts the by using Position ▲, ▼ buttons.
Zoom: Magnifies the 16:9 wide pictures vertically to fit the screen size.
NAdjusts the or by using Zoom Position ▲, ▼ button.
4:3: Sets the picture to basic (4:3) mode.
NDo not watch in 4:3 format for a long time. Traces of borders displayed
on the left, right and centre of the screen may cause image retention
(screen burn) which are not covered by the warranty.
Screen Fit: Displays the full image without any cut-off when HDMI (720p /
1080i / 1080p) or Component (1080i / 1080p) signals are inputted.
English
◀ ▶
●Smart View 1 for LED 5 series 32" and above : Reduces the 16:9 picture by 50%.
●Smart View 2
for LED 5 series 32" and above
: Reduces the 16:9 picture by 25%.
NNOTE
●Smart View 1 for LED 5 series 32" and above is enabled only in HDMI
mode.
●Smart View 2 for LED 5 series 32" and above is enabled only in DTV and
HDMI modes.
●The picture size can vary depending on the input resolution when
content is played using under .Videos Media Play
●Zoom/Position: Adjust the picture size and position. It is only available in
Zoom.
●Position: Adjust the picture position. It is only available in Screen Fit Wide or
Zoom.
English
◀ ▶
NNOTE
●
After selecting Screen Fit in HDMI (1080i / 1080p) or Component (1080i
/ 1080p) mode, you may need to centre the picture:
1. Select the Position. Press the ENTER E button.
2. Press the ▲, ▼, ◄ or ► button to move the picture.
●If you want to reset the position you adjusted, select in the Reset
Position screen. The picture will be set to its default position.
●If you use the Screen Fit function with HDMI 720p input, 1 line will be cut
at the top, bottom, left and right as in the overscan function.
●4:3 Screen Size: Available only when picture size is set to . You Auto Wide
can determine the desired picture size at the 4:3 WSS (Wide Screen Service)
size or the original size. Each European country requires different picture size.
English
◀ ▶
■PIP t
O
MENU
m
→ Picture → PIP → ENTER
E
You can watch the TV tuner and one external video source simultaneously. For
example, if you have a cable box connected to the Cable In jack, you can use PIP
to watch programs from the cable box and watch a movie from a Blu-ray player
attached to the HDMI In jack. does not function in the same mode.PIP
NNOTE
●If you turn the TV off while watching in mode, the PIP window will PIP
disappear.
●You may notice that the picture in the PIP window becomes slightly
unnatural when you use the main screen to view a game or karaoke.
English
◀ ▶
●PIP settings
Main picture Sub picture
Component, HDMI, HDMI2/DVI TV
●PIP: Activate or deactivate the PIP function.
●Aerial Air Cable: Select either or as the input source for the sub-screen.
●Channel: Select the channel for the sub-screen.
●Size (õ / ã): Select a size for the sub-picture.
●Position (ã / – / — / œ): Select a position for the sub-picture.
●Sound Select: You can choose the desired sound in mode.PIP
English
◀ ▶
❑Changing the Picture Options
■Advanced Settings
OMENUm → Picture → Advanced Settings → ENTERE
(available in Standard / Movie mode)
You can adjust the detailed setting for the screen including colour and contrast.
NWhen connecting a PC, you can only make changes to the White Balance
and .Gamma
●Dynamic Contrast: Adjust the screen contrast.
●Black Tone: Select the black level to adjust the screen depth.
●Flesh Tone: Adjust the flesh tone colour.
English
◀ ▶
●RGB Only Mode: Displays the Red, Green and Blue colour for making fine
adjustments to the hue and saturation.
●Colour Space: Adjust the range of colours available to create the image.
NTo adjust , ,Colour Red Green Blue Reset Colour Space, and , set to
Custom. for PDP TV
●White Balance: You can adjust the colour temperature of the picture to make
white objects look white, and the overall picture appear natural.
2 Point: You can adjust each of the 3 colour's luminosity with the offset menu
and the brightness with the gain menu. To restore the default values, select
Reset.
English
◀ ▶
10 Point for PDP TV : You can adjust the white balance by adjusting the
brightness of each of the 10 sections of red, green, and blue colours of the
input signal. To choose a section, select a desired section in field.Level
NYou can use the function only when the 10 Point Picture Mode is set to
Movie. Some external devices may not support the function.
English
◀ ▶
●Gamma: Adjust the primary colour intensity.
●Motion Lighting: Reduce power consumption by brightness control adapted
motion.
NThis function is not supported in mode. 3D for PDP 4900
NOnly available in Standard mode.
NWhen changing a setting value of Backlight for LED TV / Cell
Light for PDP TV , or , will be set to Brightness Contrast Motion Lighting
Off.
English
◀ ▶
■Picture Options
O
MENU
m
→ Picture → Picture Options → ENTER
E
NWhen connecting a PC, you can only make changes to the Colour Tone.
●Colour Tone
NWarm1 Warm2 or will be deactivated when the picture mode is
Dynamic.
NSettings can be adjusted and stored for each external device connected
to an input on the TV.
●Digital Clean View: If the broadcast signal received by your TV is weak, you
can activate the feature to reduce any static and ghosting Digital Clean View
that may appear on the screen.
NWhen the signal is weak, try other options until the best picture is
displayed.
English
◀ ▶
Auto Visualisation: When changing analogue channels, displays signal
strength.
NOnly available for analogue channels.
NWhen the button is pressed, the signal strength bar is displayed.INFO
NWhen bar is green, you are receiving the best possible signal.
●MPEG Noise Filter: Reduces MPEG noise to provide improved picture
quality.
●HDMI Black Level: Selects the black level on the screen to adjust the screen
depth.
NAvailable only in mode (RGB signals).HDMI
English
◀ ▶
●LED Clear Motion for LED TV : Removes drag from fast scenes with a lot of
movement to provide a clear picture.
NIt will be deactivated when the picture mode is set to .Natural
NThe screen may become slightly darker when you play LED Clear
Motion.
●Black Optimiser for PDP TV : Realizes of the black colour deeply and expands
the contrast ratio.
NWhen connecting a PC, it will be set to off and deactivated.
NWhen the TV is operating other applications, it will be deactivated. (ex.
Media Play, PIP, Teletext)
English
◀ ▶
■Picture Off t
O
MENU
m
→ Picture → Picture Off → ENTER
E
The screen is turned off but the sound remains on. Press any button except
volume button to turn on the screen.
English
◀ ▶
■Reset Picture
O
MENU
m
→ Picture → Reset Picture → ENTER
E
Resets your current picture mode to its default settings.
English
◀ ▶
❑Changing the Preset Sound Mode
■Sound Mode
OMENUm → Sound → Sound Mode → ENTERE
●Standard: Selects the normal sound mode.
●Music: Emphasises music over voices.
●Movie: Provides the best sound for movies.
●Clear Voice: Emphasises voices over other sounds.
●Amplify: Increase the intensity of high-frequency sound to allow a better
listening experience for the hearing impaired.
NIf is set to , is disabled.Speaker Select External Speaker Sound Mode
English
◀ ▶
❑Adjusting Sound Settings
■Sound Effect
(standard sound mode only)
OMENUm → Sound → Sound Effect → ENTERE
●DTS TruSurround
This function provides a virtual 5.1 channel surround sound experience
through a pair of speakers using HRTF (Head Related Transfer Function)
technology.
●DTS TruDialog
This function allows you to increase the intensity of a voice over background
music or sound effects so that dialogue can be heard more clearly.
English
◀ ▶
●Equaliser
Use Equaliser to customize sound setting for each speaker.
Balance: Adjusts the balance between the right and left speaker.
100Hz / 300Hz / 1kHz / 3kHz / 10kHz (Bandwidth Adjustment): Adjusts the
level of specific bandwidth frequencies.
Reset: Resets the equaliser to its default settings.
NIf is set to , Speaker Select External Speaker Sound Effect is disabled.
English
◀ ▶
■3D Audio for PDP 4900
O
MENU
m
→ Sound → 3D Audio → ENTER
E
3D audio technology provides the immersive sound corresponding to the pop-up
effect of 3D video by audio depth control in perspective.
NAvailable in only when watching 3D image.
English
◀ ▶
■Speaker Settings
O
MENUm → Sound → Speaker Settings → ENTERE
●Speaker Select t
A sound echo may occur due to a difference in decoding speed between
the main speaker and the audio receiver. In this case, set the TV to External
Speaker.
NWhen is set to , the volume and Speaker Select External Speaker
MUTE buttons will not operate and the sound settings will be limited.
English
◀ ▶
NWhen is set to .Speaker Select External Speaker
●
TV Speaker: Off, : OnExternal Speaker
NWhen is set to .Speaker Select TV Speaker
●TV Speaker External Speaker: On, : On
NIf there is no video signal, both speakers will be mute.
English
◀ ▶
●Auto Volume
To equalize the volume level on each channel, set to .Normal
Night: This mode provides an improved sound experience compared to
Normal mode, making almost no noise. It is useful at night.
NTo use the volume control on the source device connected to the TV,
set Auto Volume to Off on the TV. Otherwise, a change to the volume
control of the source device may not be applied.
English
◀ ▶
■Additional Settings
O
MENU
m
→ Sound → Additional Settings → ENTER
E
●DTV Audio Level (digital channels only): This function allows you to reduce
the disparity of a voice signal (which is one of the signals received during a
digital TV broadcast) to a desired level.
NAccording to the type of broadcast signal, can be MPEG / HE-AAC
adjusted between -10dB and 0dB.
NTo increase or decrease the volume, adjust between the range 0 and -10
respectively.
English
◀ ▶
●Digital Audio Out: Digital Audio out is used to provide digital sound, reducing
interference going to speakers and various digital devices such as a DVD
player.
Audio Format: You can select the Digital Audio output format. The available
Digital Audio output format may differ depending on the input source.
NBy connecting to 5.1ch speakers in a Dolby Digital setup, maximize your
interactive 3D sound experience.
Audio Delay: Correct audio-video sync problems, when watching TV or
video, and when listening to digital audio output using an external device such
as an AV receiver (0ms ~ 250ms).
English
Produktspecifikationer
| Varumärke: | Samsung |
| Kategori: | Tv |
| Modell: | UA40H5141AK |
Behöver du hjälp?
Om du behöver hjälp med Samsung UA40H5141AK ställ en fråga nedan och andra användare kommer att svara dig
Tv Samsung Manualer
12 Mars 2025
12 Mars 2025
12 Mars 2025
12 Mars 2025
12 Mars 2025
12 Mars 2025
12 Mars 2025
12 Mars 2025
22 Februari 2025
21 Februari 2025
Tv Manualer
- Tv Sony
- Tv Xiaomi
- Tv Casio
- Tv LG
- Tv AEG
- Tv Philips
- Tv Panasonic
- Tv BEKO
- Tv Daewoo
- Tv Grundig
- Tv JVC
- Tv Medion
- Tv Nokia
- Tv Pioneer
- Tv Siemens
- Tv Toshiba
- Tv Abus
- Tv Ag Neovo
- Tv Acer
- Tv Aiwa
- Tv AOC
- Tv Akai
- Tv Alden
- Tv Alphatronics
- Tv Aldi
- Tv Allview
- Tv Airis
- Tv Arcelik
- Tv Aristona
- Tv Apex
- Tv Strong
- Tv Icy Box
- Tv BenQ
- Tv Lexibook
- Tv Sharp
- Tv Techwood
- Tv Loewe
- Tv Brandt
- Tv Telefunken
- Tv Palsonic
- Tv Walker
- Tv Funai
- Tv Hitachi
- Tv Nedis
- Tv Thomson
- Tv Saba
- Tv Antarion
- Tv Lenco
- Tv Pyle
- Tv Kernau
- Tv Manta
- Tv Tevion
- Tv SereneLife
- Tv OK
- Tv Hisense
- Tv Hyundai
- Tv Vox
- Tv Proscan
- Tv Westinghouse
- Tv Vestel
- Tv ECG
- Tv Bush
- Tv RCA
- Tv Clatronic
- Tv Tucson
- Tv Sencor
- Tv GPX
- Tv Blaupunkt
- Tv Megasat
- Tv Lenovo
- Tv Manhattan
- Tv Svan
- Tv Logik
- Tv Polaroid
- Tv Sagem
- Tv Salora
- Tv Denver
- Tv Optoma
- Tv Finlux
- Tv Schneider
- Tv Sanyo
- Tv Sunstech
- Tv Bang And Olufsen
- Tv Philco
- Tv TCL
- Tv Nabo
- Tv Infiniton
- Tv Sylvania
- Tv Mitsubishi
- Tv Aspes
- Tv Schaub Lorenz
- Tv Nec
- Tv Emerson
- Tv Sunny
- Tv Technisat
- Tv GoGEN
- Tv Marquant
- Tv Orima
- Tv Luxor
- Tv Nordmende
- Tv AudioAffairs
- Tv Magnum
- Tv Haier
- Tv Krüger And Matz
- Tv Iiyama
- Tv Oki
- Tv Audiosonic
- Tv Proline
- Tv Coby
- Tv Muse
- Tv Marantz
- Tv Seg
- Tv Metz
- Tv Vivo
- Tv Element
- Tv Qilive
- Tv Kuppersbusch
- Tv Continental Edison
- Tv Uniden
- Tv Insignia
- Tv Daitsu
- Tv Peerless-AV
- Tv Dual
- Tv Terris
- Tv AYA
- Tv Changhong
- Tv Planar
- Tv Alba
- Tv Naxa
- Tv Technika
- Tv Chiq
- Tv Star-Light
- Tv Fantec
- Tv Nextbase
- Tv Zenith
- Tv Teac
- Tv Mpman
- Tv Sweex
- Tv Trevi
- Tv Vizio
- Tv Tesla
- Tv Cello
- Tv Sogo
- Tv Mx Onda
- Tv Orion
- Tv Wharfedale
- Tv Viewsonic
- Tv Nikkei
- Tv Peaq
- Tv Vivax
- Tv Hannspree
- Tv Nevir
- Tv Yasin
- Tv Jensen
- Tv Roadstar
- Tv Humax
- Tv Newstar
- Tv XD Enjoy
- Tv MT Logic
- Tv Superior
- Tv Kunft
- Tv ITT
- Tv Grunkel
- Tv ILive
- Tv Oppo
- Tv Intenso
- Tv Inovia
- Tv Odys
- Tv NPG
- Tv Furrion
- Tv Cecotec
- Tv Bluesky
- Tv Videocon
- Tv Xoro
- Tv Durabase
- Tv HKC
- Tv Edenwood
- Tv Monster
- Tv Woxter
- Tv Premier
- Tv Onn
- Tv Packard Bell
- Tv Opera
- Tv LTC
- Tv JTC
- Tv Zalman
- Tv Orava
- Tv Horizon
- Tv Ferguson
- Tv Reflexion
- Tv Viewpia
- Tv JGC
- Tv Online
- Tv Dyon
- Tv DirecTV
- Tv Tele 2
- Tv Graetz
- Tv Kogan
- Tv Telesystem
- Tv Kemo
- Tv Jay-tech
- Tv Doffler
- Tv EKO
- Tv E-motion
- Tv Mitsai
- Tv Selfsat
- Tv High One
- Tv V7
- Tv Tve
- Tv ISymphony
- Tv Pantel
- Tv Magnavox
- Tv ATYME
- Tv HCI
- Tv Inno-Hit
- Tv Lin
- Tv Engel
- Tv TechLine
- Tv Elements
- Tv Digihome
- Tv Englaon
- Tv Reflex
- Tv Astar
- Tv Visco
- Tv Tivax
- Tv H&B
- Tv Norcent
- Tv TELE System
- Tv United
- Tv TIM
- Tv Oyster
- Tv Belson
- Tv Vision Plus
- Tv Sbr
- Tv Bauhn
- Tv Voxx
- Tv Rm 2000
- Tv Hoher
- Tv Majestic
- Tv Felson
- Tv SEIKI
- Tv Mach Power
- Tv Elbe
- Tv MBM
- Tv Axing
- Tv FFalcon
- Tv CGV
- Tv Smart Tech
- Tv SunBriteTV
- Tv Séura
- Tv Mitzu
- Tv Caratec
- Tv JTC24
- Tv Coocaa
- Tv SYLVOX
- Tv Kivi
- Tv Smart Brand
- Tv RevolutionHD
- Tv Voxicon
- Tv QBell Technology
- Tv Aconatic
- Tv Mitchell & Brown
- Tv FOX Electronics
- Tv Mystery
- Tv Linsar
Nyaste Tv Manualer
19 Mars 2025
19 Mars 2025
13 Mars 2025
13 Mars 2025
13 Mars 2025
13 Mars 2025
12 Mars 2025
12 Mars 2025
12 Mars 2025
12 Mars 2025