Sauter HO 1K Bruksanvisning
Sauter
Mätutrustning
HO 1K
Läs nedan 📖 manual på svenska för Sauter HO 1K (28 sidor) i kategorin Mätutrustning. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/28
Sauter GmbH
Ziegelei 1
D-72336 Balingen
e-mail: info@kern-sohn.com
Phone : +49-[0]7433- 9933-0
Fax: +49-[0]7433- - 9933 149
Internet: www.sauter.eu
Instruction manual ultrasonic hardness
tester
SAUTER HO
Version 2.1
05/20 23
GB
HO- -e-2321 BA
PROFESSIONAL MEASURING
2 - -e-2321 HO BA
GB
SAUTER HO
V. 2.1 05/20 23
Instruction manual ultrasonic hardness tester
Thank you for purchasing the digital ultrasonic hardness tester from SAUTER. We
hope you will be very satised with the high quality of the hardness tester and its
extensive functionality.
For any questions, wishes and suggestions we are at your disposal.
Table of contents:
1 Safety and liability ......................................................................................... 3
1.1 Safety Instructions ................................................................................................................... 3
2 Introduction .................................................................................................... 3
2.1 Description of the device ......................................................................................................... 3
2.2 Specication ............................................................................................................................. 4
2.3 Use ............................................................................................................................................. 5
2.4 Operating conditions ............................................................................................................... 5
2.5 Scope of delivery for the standard version ........................................................................... 5
3 Structure and function .................................................................................. 6
3.1 Basic Structure and Functionality .......................................................................................... 6
3.2 Ultrasonic sensor ..................................................................................................................... 7
4 Technical properties ...................................................................................... 9
4.1 Technical data ........................................................................................................................... 9
5 Safety instructions for handling ................................................................. 10
5.1 Preparation and control ......................................................................................................... 10
5.2 Measurement .......................................................................................................................... 12
6 Special precautions ..................................................................................... 17
7 Handling ....................................................................................................... 18
7.1 Masks and keys ...................................................................................................................... 18
7.2 Test settings ........................................................................................................................... 20
7.3 System settings ..................................................................................................................... 21
7.4 Memory settings ..................................................................................................................... 22
7.5 Print settings ........................................................................................................................... 23
7.6 Calibration ............................................................................................................................... 24
7.7 Permissible deviation and repeatability ............................................................................... 26
7.8 Battery ..................................................................................................................................... 27
7.9 Data transmission .................................................................................................................. 27
8 Maintenance ................................................................................................. 27
9 Warranty ....................................................................................................... 28
10 Storage/Transport ........................................................................................ 28
HO- -e-2321 3 BA
1 Safety and liability
These operating instructions contain important information about safe handling and
maintenance of your new device. Before using the appliance for the rst time, please
read these operating instructions completely and carefully. Please keep the manual
in a safe place for future reference.
1.1 Safety Instructions
Your device is a high-precision instrument; it requires careful handling and must not
be exposed to considerable vibrations. Risk of damage to internal components!
The indenter of the hardness tester is made of diamond and has absolute natural
hardness. Risk of scratching and damage to valuable objects!
After the measurement, lift o the indenter for approx. 0.5s and then perform a new
measurement. Otherwise there will be no resonance between the indenter and the
test specimen in a short time.
After use, store the device in a transport case. Danger of damage!
The main unit and the sensor must not be disassembled. No liability is assumed for
any damage resulting from this.
It is prohibited to use the device in an explosive environment. Fire and explosion
hazard!
Battery: Only the battery supplied by the manufacturer may be used. The battery must
not be disassembled. When inserting the battery, make sure that the polarity is
correct .
Do not throw the battery into fire or heat sources, immerse it in water or expose it to
water! If the battery is deformed, it must not be reused. Switch o the device before
changing the battery. The battery must not be removed when the unit is switched on.
The battery is installed before delivery and does not require any major changes.
Power supply unit: The power supply unit must be stored in a dry place. It must be
protected against short circuits. Danger of damage! Do not touch with wet hands!
Danger of electric shock!
We reserve the right to change the specication of the device as well as the software
without prior notice.
2 Introduction
2.1 Description of the device
Many common measuring methods are currently used for hardness testing.
Such as Brinell, Rockwell, Vickers, Leeb and the like The test load as well as the
rather large penetration depth in the Rockwell and Brinell method lead to
Produktspecifikationer
| Varumärke: | Sauter |
| Kategori: | Mätutrustning |
| Modell: | HO 1K |
Behöver du hjälp?
Om du behöver hjälp med Sauter HO 1K ställ en fråga nedan och andra användare kommer att svara dig
Mätutrustning Sauter Manualer
6 December 2024
6 December 2024
6 December 2024
6 December 2024
6 December 2024
6 December 2024
6 December 2024
6 December 2024
6 December 2024
6 December 2024
Mätutrustning Manualer
- Mätutrustning Bosch
- Mätutrustning Panasonic
- Mätutrustning DeWalt
- Mätutrustning Fysic
- Mätutrustning Honeywell
- Mätutrustning Pioneer
- Mätutrustning Albrecht
- Mätutrustning Alecto
- Mätutrustning Amprobe
- Mätutrustning Nedis
- Mätutrustning Pyle
- Mätutrustning Yato
- Mätutrustning Lanaform
- Mätutrustning Megasat
- Mätutrustning Meec Tools
- Mätutrustning Milwaukee
- Mätutrustning Extech
- Mätutrustning Victron Energy
- Mätutrustning Hazet
- Mätutrustning Metrix
- Mätutrustning Benning
- Mätutrustning Einhell
- Mätutrustning Voltcraft
- Mätutrustning Midland
- Mätutrustning Mitsubishi
- Mätutrustning Velleman
- Mätutrustning Vemer
- Mätutrustning Technics
- Mätutrustning Perel
- Mätutrustning Burg-Wachter
- Mätutrustning Kyoritsu
- Mätutrustning IFM
- Mätutrustning Ideal
- Mätutrustning Flir
- Mätutrustning Homedics
- Mätutrustning Grohe
- Mätutrustning Technoline
- Mätutrustning Soler And Palau
- Mätutrustning Continental Edison
- Mätutrustning Rossmax
- Mätutrustning Carrier
- Mätutrustning Testboy
- Mätutrustning Goclever
- Mätutrustning Trotec
- Mätutrustning LaCie
- Mätutrustning Danfoss
- Mätutrustning AS - Schwabe
- Mätutrustning Hager
- Mätutrustning Bresser
- Mätutrustning TFA
- Mätutrustning Owon
- Mätutrustning Flex
- Mätutrustning Finder
- Mätutrustning Fluke
- Mätutrustning Fantini Cosmi
- Mätutrustning Eltako
- Mätutrustning EBERLE
- Mätutrustning Basetech
- Mätutrustning Stabila
- Mätutrustning Be Cool
- Mätutrustning Laserliner
- Mätutrustning Wentronic
- Mätutrustning Comark
- Mätutrustning REV
- Mätutrustning Testo
- Mätutrustning Clean Air Optima
- Mätutrustning Bruder Mannesmann
- Mätutrustning Eastron
- Mätutrustning ORNO
- Mätutrustning RIDGID
- Mätutrustning Westfalia
- Mätutrustning Monacor
- Mätutrustning Multimetrix
- Mätutrustning PCE
- Mätutrustning GW Instek
- Mätutrustning Logilink
- Mätutrustning SIIG
- Mätutrustning Oregon Scientific
- Mätutrustning Etymotic
- Mätutrustning Reely
- Mätutrustning Muller
- Mätutrustning TFA Dostmann
- Mätutrustning Werma
- Mätutrustning Greisinger
- Mätutrustning Beha-Amprobe
- Mätutrustning Kopp
- Mätutrustning Kern
- Mätutrustning Kogan
- Mätutrustning Kreg
- Mätutrustning Pancontrol
- Mätutrustning Peak
- Mätutrustning Uni-T
- Mätutrustning H-Tronic
- Mätutrustning Elgato
- Mätutrustning Hikmicro
- Mätutrustning RK Technology
- Mätutrustning PeakTech
- Mätutrustning Sonel
- Mätutrustning Tru Components
- Mätutrustning Emko
- Mätutrustning Aktobis
- Mätutrustning Entes
- Mätutrustning KS Tools
- Mätutrustning Lund
- Mätutrustning Trumeter
- Mätutrustning Delta Ohm
- Mätutrustning Hanna
- Mätutrustning MGL Avionics
- Mätutrustning Adwa
- Mätutrustning Chauvin Arnoux
- Mätutrustning Megger
- Mätutrustning AREXX
- Mätutrustning Gossen Metrawatt
- Mätutrustning PCE Instruments
- Mätutrustning CEM
- Mätutrustning SHX
- Mätutrustning Hameg
- Mätutrustning TDE Instruments
- Mätutrustning Joy-it
- Mätutrustning Angler
- Mätutrustning Circutor
- Mätutrustning Wachendorff
- Mätutrustning Klein Tools
- Mätutrustning Duro Pro
- Mätutrustning Aerospace Logic
- Mätutrustning Zircon
- Mätutrustning BJZ
- Mätutrustning Johnson Level
- Mätutrustning GMW
- Mätutrustning SOEKS
- Mätutrustning Apollo Ultrasonic
- Mätutrustning Softing
- Mätutrustning Weltron
- Mätutrustning Oscium
- Mätutrustning Janitza
- Mätutrustning Sanwa
- Mätutrustning Condtrol
- Mätutrustning J.P. Instruments
- Mätutrustning MSW
- Mätutrustning Weidmüller
- Mätutrustning Qubino
- Mätutrustning Lascar Electronics
- Mätutrustning HT Instruments
- Mätutrustning P3 International
- Mätutrustning Beckmann & Egle
- Mätutrustning Seek Thermal
- Mätutrustning INFICON
- Mätutrustning Motrona
- Mätutrustning Tempo
- Mätutrustning Camille Bauer
- Mätutrustning Blebox
- Mätutrustning Seaward
- Mätutrustning HOZO Design
- Mätutrustning Corentium
- Mätutrustning GQ
- Mätutrustning Tektronix
- Mätutrustning Dostmann Electronic
- Mätutrustning Murideo
- Mätutrustning SecuTech
- Mätutrustning NetPeppers
- Mätutrustning SensoProtect
- Mätutrustning Water-i.d.
- Mätutrustning ZKETECH
- Mätutrustning LabNation
- Mätutrustning Electronics International
- Mätutrustning Cliff
- Mätutrustning ClimeMET
- Mätutrustning Fixpoint
- Mätutrustning Kübler
- Mätutrustning AkYtec
- Mätutrustning Stahlwille
- Mätutrustning MASIMO
- Mätutrustning Milesight
- Mätutrustning Enda
- Mätutrustning CSL
- Mätutrustning Ermenrich
- Mätutrustning PICO
- Mätutrustning Siglent
- Mätutrustning Noyafa
- Mätutrustning Stamos
- Mätutrustning Brookhuis
Nyaste Mätutrustning Manualer
11 December 2024
11 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024
9 December 2024