Sauter TI-ACL Bruksanvisning

Sauter Mätutrustning TI-ACL

Läs nedan 📖 manual på svenska för Sauter TI-ACL (6 sidor) i kategorin Mätutrustning. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/6
Sauter GmbH
Ziegelei 1
D-72336 Balingen
e-mail: info@kern-sohn.com
Phone : +49-[0]7433- 9933-0
Fax: +49-[0]7433- - 9933 149
Internet: www.sauter.eu
Instruction manual test stand for an
analog Shore hardness tester
SAUTER TI
Version 2.0
03/2020
GB
TI- -e-2020 BA
PROFESSIONAL MEASURING
2 - -e-2121 TI BA
GB
Congratulations on the purchase of the SAUTER TI test stand for our analogue Shore
hardness testers.
This table-top test stand is very robust and the device will last you many years if you
operate and maintain it properly.
If you have any questions, wishes or suggestions, we are always available to you under
our service number.
Table of contents:
1 Before commissioning .................................................................................. 3
2 Introduction .................................................................................................... 3
3 Structure ......................................................................................................... 3
4 Operation ........................................................................................................ 4
5 Note ................................................................................................................. 4
6 Maintenance ................................................................................................... 4
7 General safety instructions ........................................................................... 5
TI- -e-2121 3 BA
1 Before commissioning
Before putting the device into operation, check the delivery for any transport damage
to the packaging, the plastic case and the device itself. Should this be the case,
SAUTER must be contacted immediately.
2 Introduction
The test stand was developed especially for our Shore hardness testers. In
combination with these, the measuring results are up to 25% more stable and more
accurate. The TI-A0 is used for HB hardness testers Shore A and 0 and the TI-D for
HB hardness tester Shore D.
The TI-ACL and TI-DL are designed for digital HD units and come with a longer column
that can be interchanged with the shorter column of the standard models.
3 Structure

Produktspecifikationer

Varumärke: Sauter
Kategori: Mätutrustning
Modell: TI-ACL

Behöver du hjälp?

Om du behöver hjälp med Sauter TI-ACL ställ en fråga nedan och andra användare kommer att svara dig


Mätutrustning Sauter Manualer

Sauter

Sauter FH 500 Bruksanvisning

30 Mars 2025
Sauter

Sauter FH 100 Bruksanvisning

30 Mars 2025
Sauter

Sauter TVS 20KN100 Bruksanvisning

30 Mars 2025
Sauter

Sauter CJ P4PG Bruksanvisning

30 Mars 2025
Sauter

Sauter DA 5-3 Bruksanvisning

30 Mars 2025
Sauter

Sauter SD 50N100 Bruksanvisning

30 Mars 2025
Sauter

Sauter LB 200-2 Bruksanvisning

30 Mars 2025
Sauter

Sauter TVM 20KN120N Bruksanvisning

30 Mars 2025
Sauter

Sauter TVL-O Bruksanvisning

10 Mars 2025
Sauter

Sauter TVM 20KN120N-LB Bruksanvisning

10 Mars 2025

Mätutrustning Manualer

Nyaste Mätutrustning Manualer

Uni-T

Uni-T UT220 Bruksanvisning

3 April 2025
Uni-T

Uni-T UT681C Bruksanvisning

3 April 2025
Uni-T

Uni-T UT216C Bruksanvisning

3 April 2025
Uni-T

Uni-T UT611 Bruksanvisning

3 April 2025
Uni-T

Uni-T UT210D Bruksanvisning

3 April 2025
Uni-T

Uni-T UT210C Bruksanvisning

3 April 2025
Uni-T

Uni-T UT210B Bruksanvisning

3 April 2025
Uni-T

Uni-T UT682 Bruksanvisning

3 April 2025
Uni-T

Uni-T UT275 Bruksanvisning

3 April 2025
Uni-T

Uni-T UT08A Bruksanvisning

3 April 2025