Scosche SAT6 Bruksanvisning

Läs nedan 📖 manual på svenska för Scosche SAT6 (1 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
1. If mounting holes on the vehicle surface do not align with bracket, use the
adaptor bracket as a template to mark mounting holes. Before securing
speaker, place bracket on mounting surface with the single tab at the top.
Mark locations of mounting holes. Remove bracket and drill out holes with
a 1/8” bit.
2. Place speed clips on mounting hole locations.
3. Secure adaptor bracket to surface with hardware supplied.
4. Feed speaker wires through in bracket and connect slot
wires to speaker. Secure speaker to bracket.
Note: Check for specific wiring instructions in the
Crutchfield MasterSheet for your particular vehicle.
Speaker Adaptor Bracket
142 SAT6
Parts
Supplied:
4
(2) Brackets (6) Phillips
Screws
Revision 02/24/14
*142SAT6*
Secure bracket to vehicle using appropriate
mounting tabs and hardware supplied.
Slot
(6) Speed Clips
Mounting Tab
Speed Clips
Tools Required
4
Phillips
Screwdriver
Drill & 1/8” Bit
Always be careful when drilling in a vehicle. WEAR EYE
PROTECTION. Be aware of things such as wiring, windows,
fuel lines and safety devices. Check drilling depth and
location to avoid damage to vehicle appearance.
CAUTION:
!
Copyright 2014 Crutchfield Corporation
IMPORTANT
Before starting, compare items on your invoice with items
received. Thoroughly check packing materials. If an item
is missing, please call Crutchfield at 1-888-955-6000.
It will be necessary to acquire screws to mount the
speaker to the adaptor bracket if speakers are not
supplied with screws.
IMPORTANT
!

Produktspecifikationer

Varumärke: Scosche
Kategori: Inte kategoriserad
Modell: SAT6

Behöver du hjälp?

Om du behöver hjälp med Scosche SAT6 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad Scosche Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer