Seagate Pipeline HD 1-TB HDD Bruksanvisning

Seagate Hårddisk Pipeline HD 1-TB HDD

Läs nedan 📖 manual på svenska för Seagate Pipeline HD 1-TB HDD (50 sidor) i kategorin Hårddisk. Denna guide var användbar för 20 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/50

Product Manual

Pipeline HD.2 Series SATA

100529372

Rev. B

April 2009

ST31000424CS

ST31000322CS

ST3500414CS

ST3500312CS

ST3320413CS

ST3320311CS

ST3250312CS

ST3160316CS

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Revision history

Publication number: 100529372, Rev. B April 2009

Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC

in the United States and/or other countries. Pipeline HD.2 Series, SeaTools and SeaTDD are either trade-

marks or registered trademarks of Seagate Technology LLC or one of its affiliated companies in the United

States and/or other countries. All other trademarks or registered trademarks are the property of their

respective owners.

When referring to hard drive capacity, one gigabyte, or GB, equals one billion bytes and one terabyte, or

TB, equals one trillion bytes. Your computer's operating system may use a different standard of measure-

ment and report a lower capacity. In addition, some of the listed capacity is used for formatting and other

functions, and thus will not be available for data storage. Seagate reserves the right to change, without

notice, product offerings or specifications.

Revision Date Sheets affected or comments

Rev. A 01/07/09 Initial release.

Rev. B 04/29/09 1, 6, 17, 22, 24, 32 and 34.

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Pipeline HD.2 Series SATA Product Manual, Rev. B i

Contents

1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 About the Serial ATA interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2.0 Drive specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2.1 Specification summary tables . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

2.2 Formatted capacity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.2.1 LBA mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.3 Default logical geometry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.4 Recording and interface technology . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

2.5 Physical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.6 Seek time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.7 Start/stop times . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11

2.8 Power specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.8.1 Power consumption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.8.2 Conducted noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.8.3 Voltage tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

2.8.4 Power-management modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

2.9 Environmental specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.9.1 Drive case temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.9.2 Temperature gradient. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.9.3 Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.9.4 Altitude . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

2.9.5 Shock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

2.9.6 Vibration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

2.10 Acoustics emissions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.11 Electromagnetic immunity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

2.12 Reliability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2.12.1 Annualized Failure Rate (AFR) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2.13 Agency certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2.13.1 Safety certification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2.13.2 Electromagnetic compatibility. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

2.13.3 FCC verification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

2.14 Environmental protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

2.14.1 European Union Restriction of Hazardous Substances (RoHS) Directive . . . . . 20

2.14.2 China Restriction of Hazardous Substances (RoHS) Directive . . . . . . . . . . . . . 20

2.15 Corrosive environment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

3.0 Configuring and mounting the drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.1 Handling and static-discharge precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

3.2 Configuring the drive . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3.3 Serial ATA cables and connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

3.4 Drive mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

4.0 Serial ATA (SATA) interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

4.1 Hot-Plug compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

4.2 Serial ATA device plug connector pin definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

4.3 Supported ATA commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4.3.1 Identify Device command. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

4.3.2 Set Features command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

4.3.3 S.M.A.R.T. commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

5.0 Seagate Technology support services. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

ii Pipeline HD.2 Series SATA Product Manual, Rev. B

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Pipeline HD.2 Series SATA Product Manual, Rev. B iii

List of Figures

Figure 1. Typical 12V startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13

Figure 2. Attaching SATA cabling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Figure 3. Mounting dimensions (for 1000 GB models). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Figure 4. Mounting dimensions (for 500, 320, 250 and 160 GB models). . . . . . . . . . . . . . . . . . . . . . . . 24

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Pipeline HD.2 Series SATA Product Manual, Rev. B 1

1.0 Introduction

This manual describes the functional, mechanical and interface specifications for the following Seagate

Pipeline HDTM.2 Series model drive:

These drives provide the following key features:

• High instantaneous (burst) data-transfer rates 3Gb/s default. Limit settings to 1.5Gb/s available via Smart

Command Transport command.

• Perpendicular recording, Tunneling Magnetoresistive (TMR) recording heads and EPRML technology, for

increased areal density.

• State-of-the-art cache and on-the-fly error-correction algorithms.

• Native Command Queueing with command ordering to increase performance in demanding applications.

• Full-track multiple-sector transfer capability without local processor intervention.

• Quiet operation.

• Support for S.M.A.R.T. drive monitoring and reporting.

• Supports latching SATA cables and connectors.

• Supports ATA8 Streaming commands.

• Supports Power-up in Standby feature.

• Supports Trusted Send/Receive Security Protocol.

• Worldwide Name (WWN) capability uniquely identifies the drive.

ST31000424CS ST3500414CS ST3320413CS ST3250312CS

ST31000322CS ST3500312CS ST3320311CS ST3160316CS

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Pipeline HD.2 Series SATA Product Manual, Rev. B 3

2.0 Drive specifications

Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal

power. For convenience, the phrases the drive and this drive are used throughout this manual to indicate the

following drive model:

2.1 Specification summary tables

The specifications listed in the following tables are for quick reference. For details on specification measure-

ment or definition, see the appropriate section of this manual.

ST31000424CS ST3500414CS ST3320413CS ST3250312CS

ST31000322CS ST3500312CS ST3320311CS ST3160316CS

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

4 Pipeline HD.2 Series SATA Product Manual, Rev. B

Table 1: Drive specifications summary for 1000 Gbyte models

Drive specification ST31000424CS ST31000322CS

Formatted capacity

(512 bytes/sector)*

1000 Gbytes

Guaranteed sectors 1,953,525,168

Heads 4

Discs 2

Bytes per sector 512

Default sectors per track 63

Default read/write heads 16

Default cylinders 16,383

Recording density 1417 kbits/in max

Track density 236 ktracks/in avg

Areal density 341.5 Gbits/in

2 avg

Spindle speed 5,900 RPM

Internal data transfer rate 1285 Mbits/sec max

Sustained data transfer rate 120 Mbytes/sec max

I/O data-transfer rate 300 Mbytes/sec max

ATA data-transfer modes supported PIO modes 0–4

Multiword DMA modes 0–2

Ultra DMA modes 0–6

Cache buffer 16 Mbytes 8 Mbytes

Height (max) 26.1 mm (1.028 inches)

Width (max) 101.85 mm (4.010 inches)

Length (max) 146.99 mm (5.787 inches)

Weight (typical) 600 grams (1.323 lb.)

Average latency 5.1 msec

Power-on to ready <12 sec typical

Standby to ready <12 sec typical

Track-to-track seek time <1.0 msec typical read;

<1.2 msec typical write

Average seek, read <14.0 msec typical

Average seek, write <15.0 msec typical

Startup current (typical) 12V (peak) 2.0 amps

Voltage tolerance (including noise) 5V ± 5%

12V ± 10%

Operating temperature

(Drive Case temperature)

0° to 75°C

Nonoperating temperature (Ambient) –40° to 70°C

Temperature gradient (max) 20°C per hour max (operating)

30°C per hour max (nonoperating)

Relative humidity 5% to 90% (operating)

5% to 95% (nonoperating)

Relative humidity gradient 30% per hour max

Wet bulb temperature (max) 37.7°C max (operating)

40.0°C max (nonoperating)

Altitude, operating –60.96 m to 3,048 m

(–200 ft. to 10,000+ ft.)

Altitude, nonoperating

(below mean sea level, max)

–60.96 m to 12,192 m

(–200 ft. to 40,000+ ft.)

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Pipeline HD.2 Series SATA Product Manual, Rev. B 5

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment

and formatting.

**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and

power to operational levels.

Operational Shock 70 Gs at 2 msec max (read)

30 Gs at 2 msec max (write)

Non-Operational Shock 350 Gs at 2 msec max

Vibration, operating 5–350 Hz: 0.50 Gs

350–500 Hz:: 0.25 Gs

Vibration, nonoperating 5–350 Hz: 5.0 Gs

350–500 Hz:: 1.0 Gs

Drive acoustics, sound power

Idle** 2.1 bels (typical)

2.3 bels (max)

CE Seek Profile 2.4 bels (typical)

2.5 bels (max)

Nonrecoverable read errors 1 per 10

15 bits read

Annualized Failure Rate (AFR) 0.55%

Warranty To determine the warranty for a specific drive, use a web browser to access the following web

page: support.seagate.com/customer/warranty_validation.jsp

From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive

serial number, model number (or part number) and country of purchase. The system will dis-

play the warranty information for your drive.

Contact start-stop cycles 50,000 at 25°C, 50% rel. humidity

Supports Hotplug operation per the

Serial ATA Revision 2.5 specification

Yes

Drive specification ST31000424CS ST31000322CS

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

6 Pipeline HD.2 Series SATA Product Manual, Rev. B

Table 2: Drive specifications summary for 500 and 320 Gbyte models

Drive specification ST3500414CS ST3500312CS ST3320413CS ST3320311CS

Formatted capacity

(512 bytes/sector)*

500 Gbytes 320 Gbytes

Guaranteed sectors 976,773,168 625,142,448

Heads 2

Discs 1

Bytes per sector 512

Default sectors per track 63

Default read/write heads 16

Default cylinders 16,383

Recording density 1417 kbits/in max

Track density 236 ktracks/in avg

Areal density 341.5 Gbits/in

2 avg

Spindle speed 5,900 RPM

Internal data transfer rate 1285 Mbits/sec max

Sustained data transfer rate 120 Mbytes/sec max

I/O data-transfer rate 300 Mbytes/sec max

ATA data-transfer modes supported PIO modes 0–4

Multiword DMA modes 0–2

Ultra DMA modes 0–6

Cache buffer 16 Mbytes 16 Mbytes8 Mbytes 8 Mbytes

Height (max) 20.20 mm (0.795 inches)

Width (max) 101.85 mm (4.010 inches)

Length (max) 146.99 mm (5.787 inches)

Weight (typical) 380 grams (0.838 lb.)

Average latency 5.1 msec

Power-on to ready <6 sec typical

Standby to ready <6 sec typical

Track-to-track seek time <1.0 msec typical read;

<1.2 msec typical write

Average seek, read <14.0 msec typical

Average seek, write <15.0 msec typical

Startup current (typical) 12V (peak) 2.0 amps

Voltage tolerance (including noise) 5V ± 5%

12V ± 10%

Operating temperature

(Drive Case temperature)

0° to 75°C

Nonoperating temperature (Ambient) –40° to 70°C

Temperature gradient (max) 20°C per hour max (operating)

30°C per hour max (nonoperating)

Relative humidity 5% to 90% (operating)

5% to 95% (nonoperating)

Relative humidity gradient 30% per hour max

Wet bulb temperature (max) 37.7°C max (operating)

40.0°C max (nonoperating)

Altitude, operating –60.96 m to 3,048 m

(–200 ft. to 10,000+ ft.)

Altitude, nonoperating

(below mean sea level, max)

–60.96 m to 12,192 m

(–200 ft. to 40,000+ ft.)

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Pipeline HD.2 Series SATA Product Manual, Rev. B 7

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment

and formatting.

**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and

power to operational levels.

Operational Shock 70 Gs at 2 msec max

Non-Operational Shock 350 Gs at 2 msec max

Vibration, operating 5–350 Hz: 0.50 Gs

350–500 Hz:: 0.25 Gs

Vibration, nonoperating 5–350 Hz: 5.0 Gs

350–500 Hz:: 1.0 Gs

Drive acoustics, sound power

Idle** 1.9 bels (typical)

2.1 bels (max)

CE Seek Profile 2.3 bels (typical)

2.4 bels (max)

Nonrecoverable read errors 1 per 10

15 bits read

Annualized Failure Rate (AFR) 0.55%

Warranty To determine the warranty for a specific drive, use a web browser to access the following web

page: support.seagate.com/customer/warranty_validation.jsp

From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive

serial number, model number (or part number) and country of purchase. The system will dis-

play the warranty information for your drive.

Contact start-stop cycles 50,000 at 25°C, 50% rel. humidity

Supports Hotplug operation per the

Serial ATA Revision 2.5 specification

Yes

Drive specification ST3500414CS ST3500312CS ST3320413CS ST3320311CS

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

8 Pipeline HD.2 Series SATA Product Manual, Rev. B

Table 3: Drive specifications summary for 250 and 160 Gbyte models

Drive specification ST3250312CS ST3500312CS

Formatted capacity

(512 bytes/sector)*

250 Gbytes 160 Gbytes

Guaranteed sectors 488,397,168 312,581,808

Heads 1

Discs 1

Bytes per sector 512

Default sectors per track 63

Default read/write heads 16

Default cylinders 16,383

Recording density 1417 kbits/in max

Track density 236 ktracks/in avg

Areal density 341.5 Gbits/in

2 avg

Spindle speed 5,900 RPM

Internal data transfer rate 1285 Mbits/sec max

Sustained data transfer rate 120 Mbytes/sec max

I/O data-transfer rate 300 Mbytes/sec max

ATA data-transfer modes supported PIO modes 0–4

Multiword DMA modes 0–2

Ultra DMA modes 0–6

Cache buffer 8 Mbytes

Height (max) 20.20 mm (0.795 inches)

Width (max) 101.85 mm (4.010 inches)

Length (max) 146.99 mm (5.787 inches)

Weight (typical) 380 grams (0.838 lb.)

Average latency 5.1 msec

Power-on to ready <6 sec typical

Standby to ready <6 sec typical

Track-to-track seek time <1.0 msec typical read;

<1.2 msec typical write

Average seek, read <14.0 msec typical

Average seek, write <15.0 msec typical

Startup current (typical) 12V (peak) 2.0 amps

Voltage tolerance (including noise) 5V ± 5%

12V ± 10%

Operating temperature

(Drive Case temperature)

0° to 75°C

Nonoperating temperature (Ambient) –40° to 70°C

Temperature gradient (max) 20°C per hour max (operating)

30°C per hour max (nonoperating)

Relative humidity 5% to 90% (operating)

5% to 95% (nonoperating)

Relative humidity gradient 30% per hour max

Wet bulb temperature (max) 37.7°C max (operating)

40.0°C max (nonoperating)

Altitude, operating –60.96 m to 3,048 m

(–200 ft. to 10,000+ ft.)

Altitude, nonoperating

(below mean sea level, max)

–60.96 m to 12,192 m

(–200 ft. to 40,000+ ft.)

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Pipeline HD.2 Series SATA Product Manual, Rev. B 9

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment

and formatting.

**During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and

power to operational levels.

Operational Shock 70 Gs at 2 msec max (read)

30 Gs at 2 msec max (write)

Non-Operational Shock 350 Gs at 2 msec max

Vibration, operating 5–350 Hz: 0.50 Gs

350–500 Hz:: 0.25 Gs

Vibration, nonoperating 5–350 Hz: 5.0 Gs

350–500 Hz:: 1.0 Gs

Drive acoustics, sound power

Idle** 1.9 bels (typical)

2.1 bels (max)

CE Seek Profile 2.3 bels (typical)

2.4 bels (max)

Nonrecoverable read errors 1 per 10

15 bits read

Annualized Failure Rate (AFR) 0.55%

Warranty To determine the warranty for a specific drive, use a web browser to access the following web

page: support.seagate.com/customer/warranty_validation.jsp

From this page, click on the “Verify Your Warranty” link. You will be asked to provide the drive

serial number, model number (or part number) and country of purchase. The system will dis-

play the warranty information for your drive.

Contact start-stop cycles 50,000 at 25°C, 50% rel. humidity

Supports Hotplug operation per the

Serial ATA Revision 2.5 specification

Yes

Drive specification ST3250312CS ST3500312CS

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

10 Pipeline HD.2 Series SATA Product Manual, Rev. B

2.2 Formatted capacity

Model

Formatted

capacity*

Guaranteed

sectors

Bytes per sector

ST31000424CS

ST31000322CS

1000 Gbytes 1,953,525,168

512

ST3500414CS

ST3500312CS

500 Gbytes 976,773,168

ST3320413CS

ST3320311CS

320 Gbytes 625,142,448

ST3250312CS 250 Gbytes 488,397,168

ST3160316CS 160 Gbytes 312,581,808

*One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment

and formatting.

2.2.1 LBA mode

When addressing the drive in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where

n is the number of guaranteed sectors as defined above.

See Section 4.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48-

bit addressing support of drives with capacities over 137 Gbytes.

2.3 Default logical geometry

Cylinders Read/write heads Sectors per track

16,383 16 63

LBA mode

When addressing the drive in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where

n is the number of guaranteed sectors as defined above.

2.4 Recording and interface technology

All models

Interface Serial ATA (SATA)

Recording method Perpendicular

Recording density (kbits/inch max) 1417 kbits/in max

Track density (ktracks/inch avg) 236 ktracks/in avg

Areal density (Gbits/inch

2 avg) 341.5 Gbits/in

2 avg

Spindle speed (RPM) 5,900 +/- 0.2%

Internal data transfer rate (Mbits/sec max) 1285 Mbits/sec max

Sustained data transfer rate (Mbytes/sec max) 120 Mbytes/sec max

I/O data-transfer rate (Mbytes/sec max) 300 (Mbytes/sec max)

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Pipeline HD.2 Series SATA Product Manual, Rev. B 11

2.5 Physical characteristics

1000 GB model 500, 320, 250 and 160GB model

Maximum height 26.1 mm (1.028 inches) 20.20 mm (0.794 inches)

Maximum width 101.85 mm (4.010 inches)

Maximum length 146.99 mm (5.787 inches)

Typical weight 600 grams (1.323 lb.) 380 grams (0.838 lb.)

Cache buffer

ST31000424CS, ST3500414CS and ST3320413CS

ST31000322CS, ST3500312CS,

ST3320311CSST3250312CS and ST3160316CS

16 Mbytes (16,384 kbytes)

8 Mbytes (8,192 kbytes)

2.6 Seek time

Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using

drive diagnostics. The specifications in the table below are defined as follows:

• Track-to-track seek time is an average of all possible single-track seeks in both directions.

• Average seek time is a true statistical random average of at least 5,000 measurements of seeks between

random tracks, less overhead.

Typical seek times (msec) Read Write

Track-to-track <1.0 <1.2

Average <14.0 <15.0

*Measured in performance mode.

**Measured in quiet mode.

Note. These drives are designed to consistently meet the seek times represented in this manual. Physical

seeks, regardless of mode (such as track-to-track and average), are expected to meet the noted

values. However, due to the manner in which these drives are formatted, benchmark tests that

include command overhead or measure logical seeks may produce results that vary from these

specifications.

2.7 Start/stop times

1000 GB models 500 and 250 GB models

Power-on to Ready (sec) <12.0 (typical) <6.0 (typical)

Standby to Ready (sec) <12.0 (typical) <6.0 (typical)

Ready to spindle stop (sec) 10 (max)

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

12 Pipeline HD.2 Series SATA Product Manual, Rev. B

2.8 Power specifications

The drive receives DC power (+5V or +12V) through a native SATA power connector. See Figure 2 on page 22.

2.8.1 Power consumption

Power requirements for the drives are listed in the table on page 9. Typical power measurements are based on

a n average of drives tested, under nominal conditions, using 5.0V and 12.0V input voltage at 25°C ambient

temperature.

• Spinup power

Spinup power is measured from the time of power-on to the time that the drive spindle reaches operating

speed.

• Idle mode power

Idle mode power is measured with the drive up to speed, with servo electronics active and with the heads in

a random track location.

• Operating (CE seek profile)

Operating power is measured by simulating a typical PVR operating environment, using a 50% write 50%

read algorithm.

• Standby mode

During Standby mode, the drive accepts commands, but the drive is not spinning, and the servo and read/

write electronics are in power-down mode.

Table 4: DC power requirements

Power dissipation (2 disk models) Avg (watts 25° C) Avg 5V typ amps Avg 12V typ amps

Spinup — — 2.0 (peak)

Idle* 3.834 0.223 0.226

Operating 4.107 0.295 0.219

Standby 0.699 0.121 0.008

Sleep 0.811 0.131 0.012

*During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may increase acoustic and

power to operational levels.

Note. Drive supports PHY layer power management. When enabled, a power savings of ~300mw can be

achieved in Idle, Standby and Sleep modes.

Power dissipation (1 disk models) Avg (watts 25° C) Avg 5V typ amps Avg 12V typ amps

Spinup — — 2.0 (peak)

Idle* 3.008 0.248 0.147

Operating 3.445 0.316 0.155

Standby 0.707 0.127 0.006

Sleep 0.742 0.134 0.006

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Pipeline HD.2 Series SATA Product Manual, Rev. B 13

2.8.1.1 Typical current profiles

Figure 1. Typical 12V startup and operation current profile

2.8.2 Conducted noise

Input noise ripple is measured at the host system power supply across an equivalent 80-ohm resistive load on

the +12 volt line or an equivalent 15-ohm resistive load on the +5 volt line.

• Using 12-volt power, the drive is expected to operate with a maximum of 120 mV peak-to-peak square-wave

injected noise at up to 10 MHz.

• Using 5-volt power, the drive is expected to operate with a maximum of 100 mV peak-to-peak square-wave

injected noise at up to 10 MHz.

Note. Equivalent resistance is calculated by dividing the nominal voltage by the typical RMS read/write

current.

2.8.3 Voltage tolerance

Voltage tolerance (including noise):

5V ± 5%

12V ± 10%

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

14 Pipeline HD.2 Series SATA Product Manual, Rev. B

2.8.4 Power-management modes

The drive provides programmable power management to provide greater energy efficiency. In most systems,

you can control power management through the system setup program. The drive features the following

power-management modes:

• Active mode

The drive is in Active mode during the read/write and seek operations.

• Idle mode

The buffer remains enabled, and the drive accepts all commands and returns to Active mode any time disc

access is necessary.

•Standby mode

The drive enters Standby mode when the host sends a Standby Immediate command. If the host has set

the standby timer, the drive can also enter Standby mode automatically after the drive has been inactive for

a specifiable length of time. The standby timer delay is established using a Standby or Idle command. In

Standby mode, the drive buffer is enabled, the heads are parked and the spindle is at rest. The drive

accepts all commands and returns to Active mode any time disc access is necessary.

• Sleep mode

The drive enters Sleep mode after receiving a Sleep command from the host. In Sleep mode, the drive buf-

fer is disabled, the heads are parked and the spindle is at rest. The drive leaves Sleep mode after it

receives a Hard Reset or Soft Reset from the host. After receiving a reset, the drive exits Sleep mode and

enters Standby mode with all current translation parameters intact.

• Idle and Standby timers

Each time the drive performs an Active function (read, write or seek), the standby timer is reinitialized and

begins counting down from its specified delay times to zero. If the standby timer reaches zero before any

drive activity is required, the drive makes a transition to Standby mode. In both Idle and Standby mode, the

drive accepts all commands and returns to Active mode when disc access is necessary.

Power modes Heads Spindle Buffer

Active Tracking Rotating Enabled

Idle Tracking Rotating Enabled

Standby Parked Stopped Enabled

Sleep Parked Stopped Disabled

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Pipeline HD.2 Series SATA Product Manual, Rev. B 15

2.9 Environmental specifications

2.9.1 Drive case temperature

Above 1,000 feet (305 meters), the maximum temperature is derated linearly to 112°F (44°C) at 10,000 feet

(3,048 meters).

Drive case temperature should be measured at the location indicated in Figure 3 on page 23.

* Ambient temperature is defined as the temperature of the environment immediately surrounding the drive.

2.9.2 Temperature gradient

Operating: 20°C per hour (68°F per hour max), without condensation

Nonoperating: 30°C per hour (86°F per hour max)

2.9.3 Humidity

2.9.3.1 Relative humidity

Operating: 5% to 90% noncondensing (30% per hour max)

Nonoperating: 5% to 95% noncondensing (30% per hour max)

2.9.3.2 Wet bulb temperature

Operating: 37.7°C (99.9°F max)

Nonoperating: 40.0°C (104°F max)

2.9.4 Altitude

Operating: –60.96 m to 3,048 m (–200 ft. to 10,000+ ft.)

Nonoperating: –60.96 m to 12,192 m (–200 ft. to 40,000+ ft.)

Operating (Drive case temperature) 0° to 75°C (32° to 167°F)

Nonoperating (Ambient *) –40° to 70°C (–40° to 158°F)

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

16 Pipeline HD.2 Series SATA Product Manual, Rev. B

2.9.5 Shock

All shock specifications assume that the drive is mounted securely with the input shock applied at the drive

mounting screws. Shock may be applied in the X, Y or Z axis.

2.9.5.1 Operating shock

The drives comply with the performance levels specified in this document when subjected to a maximum oper-

ating shock of 70 Gs (Read) and 30 Gs (Write) based on half-sine shock pulses of 2 msec. Shocks should not

be repeated more than two times per second.

2.9.5.2 Nonoperating shock

The nonoperating shock level that the drive can experience without incurring physical damage or degradation

in performance when subsequently put into operation is 350 Gs based on a nonrepetitive half-sine shock pulse

of 2 msec duration.

2.9.6 Vibration

All vibration specifications assume that the drive is mounted securely with the input vibration applied at the

drive mounting screws. Vibration may be applied in the X, Y or Z axis.

2.9.6.1 Operating vibration

The maximum vibration levels that the drive may experience while meeting the performance standards speci-

fied in this document are specified below

2.9.6.2 Nonoperating vibration

The maximum nonoperating vibration levels that the drive may experience without incurring physical damage

or degradation in performance when subsequently put into operation are specified below.

5–350 Hz 0.50 Gs

350–500 Hz 0.25 Gs

5–350 Hz 5.0 Gs

350–500 Hz 1.0 Gs

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Pipeline HD.2 Series SATA Product Manual, Rev. B 17

2.10 Acoustics emissions

Drive emission of sound is measured consistent with the ECMA-74 and its referenced standards. Testing is

conducted at room temperature (approximately 25 degrees C). Emission levels are reported as the total

A-weighted sound power levels for, steady state, idle and active (seek) modes of operations.

[1] During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. specification, which may

increase acoustic and power to operational levels.

Test for Prominent Discrete Tones (PDTs)

Seagate follows the ECMA-74 standards for measurement and identification of PDTs. An exception to this pro-

cess is the use of the absolute threshold of hearing. Seagate uses the lower limit for the threshold curve* to

discern tone audibility and to compensate for the inaudible components of sound prior to computation of tone

ratios according to Annex D of the ECMA-74 standards.

* Defined as the median curve given by ISO 389-7 (Tf curve) minus 10dB at all frequencies.

2.11 Electromagnetic immunity

When properly installed in a representative host system, the drive operates without errors or degradation in

performance when subjected to the radio frequency (RF) environments defined in the following table:

Table 5: Drive A-weighted Sound Power Levels (SWL, BA)

Idle[1] CE seek profile

1000 GB model 2.1 bels (typ)

2.3 bels (max)

2.4 bels (typ)

2.5 bels (max)

500, 320, 250 and 160 GB model 1.9 bels (typ)

2.1 bels (max)

2.3 bels (typ)

2.4 bels (max)

Table 6: Radio frequency environments

Test Description Performance level Reference standard

Electrostatic

discharge

Contact, HCP, VCP: ± 4 kV; Air: ± 8 kV B EN 61000-4-2: 95

Radiated RF

immunity

80 to 1,000 MHz, 3 V/m,

80% AM with 1 kHz sine

900 MHz, 3 V/m, 50% pulse modulation @ 200 Hz

A EN 61000-4-3: 96

ENV 50204: 95

Electrical fast

transient

± 1 kV on AC mains, ± 0.5 kV on external I/O B EN 61000-4-4: 95

Surge immunity ± 1 kV differential, ± 2 kV common, AC mains B EN 61000-4-5: 95

Conducted RF

immunity

150 kHz to 80 MHz, 3 Vrms, 80% AM with 1 kHz sine A EN 61000-4-6: 97

Voltage dips,

interrupts

0% open, 5 seconds

0% short, 5 seconds

40%, 0.10 seconds

70%, 0.01 seconds

EN 61000-4-11: 94

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

18 Pipeline HD.2 Series SATA Product Manual, Rev. B

2.12 Reliability

2.12.1 Annualized Failure Rate (AFR)

The product shall achieve an Annualized Failure Rate (AFR) of 0.55% when operated in an environment of

ambient air temperatures of 25°C. Operation at temperatures outside the specifications in Section 2.9 may

increase the product AFR. AFR is a population statistics that is not relevant to individual units.

AFR specifications are based on the following assumptions for desktop personal computer environments:

• 8760 power-on-hours per year.

• 10,000 average motor start/stop cycles per year.

• Operations at nominal voltages.

• Temperatures outside the specifications in Section 2.9 may reduce the product reliability.

• Normal I/O duty cycle for desktop personal computers. Operation at excessive I/O duty cycle may degrade

product reliability.

The consumer electronics environment of power-on-hours, temperature, and I/O duty cycle affect the product

AFR. The AFR will be degraded if used in a enterprise application.

2.13 Agency certification

2.13.1 Safety certification

These products are certified to meet the requirements of UL60950-1, CSA60950-1 and EN60950 and so

marked as to the certify agency.

2.13.2 Electromagnetic compatibility

Hard drives that display the CE mark comply with the European Union (EU) requirements specified in the Elec-

tromagnetic Compatibility Directive (2004/108/EC) as put into place 20 July 2007. Testing is performed to the

levels specified by the product standards for Information Technology Equipment (ITE). Emission levels are

defined by EN 55022, Class B and the immunity levels are defined by EN 55024.

Drives are tested in representative end-user systems. Although CE-marked Seagate drives comply with the

directives when used in the test systems, we cannot guarantee that all systems will comply with the directives.

The drive is designed for operation inside a properly designed enclosure, with properly shielded I/O cable (if

necessary) and terminators on all unused I/O ports. Computer manufacturers and system integrators should

confirm EMC compliance and provide CE marking for their products.

Nonrecoverable read errors 1 per 10

15 bits read, max

Annualized Failure Rate (AFR) 0.55% (nominal power, 25°C ambient temperature)

Contact start-stop cycles 50,000 cycles

(at nominal voltage and temperature, with 60 cycles per hour and a 50% duty cycle)

Warranty To determine the warranty for a specific drive, use a web browser to access the fol-

lowing web page: support.seagate.com/customer/warranty_validation.jsp

From this page, click on the “Verify Your Warranty” link. You will be asked to provide

the drive serial number, model number (or part number) and country of purchase.

The system will display the warranty information for your drive.

Preventive maintenance None required.

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Pipeline HD.2 Series SATA Product Manual, Rev. B 19

Korean RRL

If these drives have the Korean Communications Commission (KCC) logo, they comply with paragraph 1 of

Article 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility

(EMC) Framework requirements of the Radio Research Laboratory (RRL) Communications Commission,

Republic of Korea.

These drives have been tested and comply with the Electromagnetic Interference/Electromagnetic

Susceptibility (EMI/EMS) for Class B products. Drives are tested in a representative, end-user system by a

Korean-recognized lab.

• Family name: Pipeline HD.2 Series

• Certificate number: In process

Australian C-Tick (N176)

If these models have the C-Tick marking, they comply with the Australia/New Zealand Standard AS/NZ

CISPR22 and meet the Electromagnetic Compatibility (EMC) Framework requirements of the Australian

Communication Authority (ACA).

2.13.3 FCC verification

These drives are intended to be contained solely within a personal computer or similar enclosure (not attached

as an external device). As such, each drive is considered to be a subassembly even when it is individually mar-

keted to the customer. As a subassembly, no Federal Communications Commission verification or certification

of the device is required.

Seagate has tested this device in enclosures as described above to ensure that the total assembly (enclosure,

disc drive, motherboard, power supply, etc.) does comply with the limits for a Class B computing device, pursu-

ant to Subpart J, Part 15 of the FCC rules. Operation with noncertified assemblies is likely to result in interfer-

ence to radio and television reception.

Radio and television interference. This equipment generates and uses radio frequency energy and if not

installed and used in strict accordance with the manufacturer’s instructions, may cause interference to radio

and television reception.

This equipment is designed to provide reasonable protection against such interference in a residential installa-

tion. However, there is no guarantee that interference will not occur in a particular installation. If this equipment

does cause interference to radio or television, which can be determined by turning the equipment on and off,

you are encouraged to try one or more of the following corrective measures:

• Reorient the receiving antenna.

• Move the device to one side or the other of the radio or TV.

• Move the device farther away from the radio or TV.

• Plug the computer into a different outlet so that the receiver and computer are on different branch outlets.

If necessary, you should consult your dealer or an experienced radio/television technician for additional sug-

gestions. You may find helpful the following booklet prepared by the Federal Communications Commission:

How to Identify and Resolve Radio-Television Interference Problems. This booklet is available from the Super-

intendent of Documents, U.S. Government Printing Office, Washington, DC 20402. Refer to publication num-

ber 004-000-00345-4.

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

20 Pipeline HD.2 Series SATA Product Manual, Rev. B

2.14 Environmental protection

Seagate designs its products to meet environmental protection requirements worldwide, including regulations

restricting certain chemical substances.

2.14.1 European Union Restriction of Hazardous Substances (RoHS) Directive

The European Union Restriction of Hazardous Substances ( RoHS) Directive, restricts the presence of chemi-

cal substances, including Lead, Cadmium, Mercury, Hexavalent Chromium, PBB and PBDE, in electronic prod-

ucts, effective July 2006. This drive is manufactured with components and materials that comply with the RoHS

Directive.

2.14.2 China Restriction of Hazardous Substances (RoHS) Directive

2.14.2 中国限制危险物品的指令

中国限制危险物品的指令

中国限制危险物品的指令中国限制危险物品的指令

This product has an Environmental Protection Use Period (EPUP) of 20 years. The following

table contains information mandated by China's "Marking Requirements for Control of Pollution

Caused by Electronic Information Products" Standard.

"O" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is lower

than the threshold defined by the China RoHS MCV Standard.

"X" indicates the hazardous and toxic substance content of the part (at the homogenous material level) is over

the threshold defined by the China RoHS MCV Standard.

2.15 Corrosive environment

Seagate electronic drive components pass accelerated corrosion testing equivalent to 10 years exposure to

light industrial environments containing sulfurous gases, chlorine and nitric oxide, classes G and H per ASTM

B845. However, this accelerated testing cannot duplicate every potential application environment. Users

should use caution exposing any electronic components to uncontrolled chemical pollutants and corrosive

chemicals as electronic drive component reliability can be affected by the installation environment. The silver,

copper, nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide, chlo-

ride, and nitrate contaminants. Sulfur is found to be the most damaging. In addition, electronic components

should never be exposed to condensing water on the surface of the printed circuit board assembly (PCBA) or

exposed to an ambient relative humidity greater than 95%. Materials used in cabinet fabrication, such as vulca-

nized rubber, that can outgas corrosive compounds should be minimized or eliminated. The useful life of any

electronic equipment may be extended by replacing materials near circuitry with sulfide-free alternatives.

“O”表示该部件（于同类物品程度上）所含的危险和有毒物质低于中国RoHS MCV标准所定义的门槛值。

“X”表示该部件（于同类物品程度上）所含的危险和有毒物质超出中国RoHS MCV标准所定义的门槛值。

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Pipeline HD.2 Series SATA Product Manual, Rev. B 21

3.0 Configuring and mounting the drive

This section contains the specifications and instructions for configuring and mounting the drive.

3.1 Handling and static-discharge precautions

After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic dis-

charge (ESD) hazards. Observe the following standard handling and static-discharge precautions:

Caution:

• Before handling the drive, put on a grounded wrist strap, or ground yourself frequently by touching the metal

chassis of a computer that is plugged into a grounded outlet. Wear a grounded wrist strap throughout the entire

installation procedure.

• Handle the drive by its edges or frame only.

• The drive is extremely fragile—handle it with care. Do not press down on the drive top cover.

• Always rest the drive on a padded, antistatic surface until you mount it in the computer.

• Do not touch the connector pins or the printed circuit board.

• Do not remove the factory-installed labels from the drive or cover them with additional labels. Removal voids

the warranty. Some factory-installed labels contain information needed to service the drive. Other labels are

used to seal out dirt and contamination.

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

22 Pipeline HD.2 Series SATA Product Manual, Rev. B

3.2 Configuring the drive

Each drive on the Serial ATA interface connects point-to-point with the Serial ATA host adapter. There is no

master/slave relationship because each drive is considered a master in a point-to-point relationship. If two

drives are attached on one Serial ATA host adapter, the host operating system views the two devices as if they

were both “masters” on two separate ports. Both drives behave as if they are Device 0 (master) devices.

Serial ATA drives are designed for easy installation. It is not necessary to set any jumpers on the drive for

proper operation; however, if you connect the drive and receive a “drive not detected” error, your SATA

equipped motherboard or host adapter may use a chipset that does not support SATA speed auto negotiation.

If you have a motherboard or host adapter that does not support auto negotiation the transfer rate can be lim-

ited to 1.5GB/s via the SMART Command Transport command.

3.3 Serial ATA cables and connectors

The Serial ATA interface cable consists of four conductors in two differential pairs, plus three ground connec-

tions. The cable size may be 30 to 26 AWG with a maximum length of one meter (39.37 inches). See Table 7

for connector pin definitions. Either end of the SATA signal cable can be attached to the drive or host.

For direct backplane connection, the drive connectors are inserted directly into the host receptacle. The drive

and the host receptacle incorporate features that enable the direct connection to be hot pluggable and blind

mateable.

For installations which require cables, you can connect the drive as illustrated in Figure 2.

Figure 2. Attaching SATA cabling

Each cable is keyed to ensure correct orientation. Pipeline HD.2 Series SATA drives support latching SATA

connectors.

Power cable

Signal cable

Signal connector

Power connector

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Recommended

case temperature

measurement location

24 Pipeline HD.2 Series SATA Product Manual, Rev. B

Figure 4. Mounting dimensions (for 500, 320, 250 and 160 GB models)

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Pipeline HD.2 Series SATA Product Manual, Rev. B 25

4.0 Serial ATA (SATA) interface

These drives use the industry-standard Serial ATA interface that supports FIS data transfers. It supports ATA

programmed input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6.

For detailed information about the Serial ATA interface, refer to the “Serial ATA: High Speed Serialized AT

Attachment” specification.

4.1 Hot-Plug compatibility

Pipeline HD.2 Series SATA drives incorporate connectors which enable you to hot plug these drives in accor-

dance with the Serial ATA Revision 2.5 specification. This specification can be downloaded from www.serial-

ata.org.

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Pipeline HD.2 Series SATA Product Manual, Rev. B 27

4.3 Supported ATA commands

The following table lists Serial ATA standard commands that the drive supports. For a detailed description of

the ATA commands, refer to the Serial ATA International Organization: Serial ATA Revision 2.6 (http://

www.sata-io.org). See “S.M.A.R.T. commands” on page 35.for details and subcommands used in the

S.M.A.R.T. implementation.

Table 8: Supported ATA commands

Command name Command code (in hex)

Check Power Mode E5H

Configure Stream 51H

Device Configuration Freeze Lock B1H / C1H

Device Configuration Identify B1H / C2H

Device Configuration Restore B1H / C0H

Device Configuration Set B1H / C3H

Device Reset 08H

Download Microcode 92H

Execute Device Diagnostics 90H

Flush Cache E7H

Flush Cache Extended EAH

Format Track 50H

Identify Device ECH

Idle E3H

Idle Immediate E1H

Initialize Device Parameters 91H

Read Buffer E4H

Read DMA C8H

Read DMA Extended 25H

Read DMA Without Retries C9H

Read Log Ext 2FH

Read Multiple C4H

Read Multiple Extended 29H

Read Native Max Address F8H

Read Native Max Address Extended 27H

Read Sectors 20H

Read Sectors Extended 24H

Read Sectors Without Retries 21H

Read Stream DMA Extended 2AH

Read Stream Extended 2BH

Read Verify Sectors 40H

Read Verify Sectors Extended 42H

Read Verify Sectors Without Retries 41H

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

28 Pipeline HD.2 Series SATA Product Manual, Rev. B

Recalibrate 10H

Security Disable Password F6H

Security Erase Prepare F3

Security Erase Unit F4H

Security Freeze F5H

Security Set Password F1

Security Unlock F2H

Seek 70H

Set Features EFH

Set Max Address F9H

Note: Individual Set Max Address

commands are identified by the value

placed in the Set Max Features regis-

ter as defined to the right.

Address:

Password:

Lock:

Unlock:

Freeze Lock:

00H

01H

02H

03H

04H

Set Max Address Extended 37H

Set Multiple Mode C6H

Sleep E6H

S.M.A.R.T. Disable Operations B0H / D9H

S.M.A.R.T. Enable/Disable Autosave B0H / D2H

S.M.A.R.T. Enable Operations B0H / D8H

S.M.A.R.T. Execute Offline B0H / D4H

S.M.A.R.T. Read Attribute Thresholds B0H / D1H

S.M.A.R.T. Read Data B0H / D0H

S.M.A.R.T. Read Log Sector B0H / D5H

S.M.A.R.T. Return Status B0H / DAH

S.M.A.R.T. Save Attribute Values B0H / D3H

S.M.A.R.T. Write Log Sector B0H / D6H

Standby E2H

Standby Immediate E0H

Write Buffer E8H

Write DMA CAH

Write DMA Extended 35H

Write DMA FUA Extended CDH

Write DMA Without Retries CBH

Write Log Extended 3F

Write Multiple C5H

Write Multiple Extended 39H

Write Multiple FUA Extended CEH

Write Sectors 30H

Write Sectors Without Retries 31H

Command name Command code (in hex)

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Pipeline HD.2 Series SATA Product Manual, Rev. B 29

Write Sectors Extended 34H

Write Stream DMA Extended 3AH

Write Stream Extended 3BH

Command name Command code (in hex)

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

30 Pipeline HD.2 Series SATA Product Manual, Rev. B

4.3.1 Identify Device command

The Identify Device command (command code EC H) transfers information about the drive to the host following

power up. The data is organized as a single 512-byte block of data, whose contents are shown in Table 8 on

page 27. All reserved bits or words should be set to zero. Parameters listed with an “x” are drive-specific or

vary with the state of the drive. See Section 2.0 on page 3 for default parameter settings.

The following commands contain drive-specific features that may not be included in the Serial ATA specifica-

tion.

Word Description Value

Configuration information:

• Bit 15: 0 = ATA; 1 = ATAPI

• Bit 7: removable media

• Bit 6: removable controller

• Bit 0: reserved

0C5AH

1 Number of logical cylinders 16,383

2 ATA-reserved 0000H

3 Number of logical heads 16

4 Retired 0000H

5 Retired 0000H

6 Number of logical sectors per logical track: 63 003F

7–9 Retired 0000H

10–19 Serial number: (20 ASCII characters, 0000

H = none) ASCII

20 Retired 0000H

21 Retired 0400H

22 Obsolete 0000H

23–26 Firmware revision (8 ASCII character string, padded with blanks to end

of string) x.xx

27–46 Drive model number: (40 ASCII characters, padded with blanks to end

of string)

47 (Bits 7–0) Maximum sectors per interrupt on Read multiple and Write

multiple (16) 8010H

48 Reserved 0000H

49 Standard Standby timer, IORDY supported and may be disabled 2F00

50 ATA-reserved 0000H

51 PIO data-transfer cycle timing mode 0200

52 Retired 0200H

53 Words 54–58, 64–70 and 88 are valid 0007

54 Number of current logical cylinders xxxxH

55 Number of current logical heads xxxxH

56 Number of current logical sectors per logical track xxxx

57–58 Current capacity in sectors xxxxH

59 Number of sectors transferred during a Read Multiple or Write Multiple

command xxxxH

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Pipeline HD.2 Series SATA Product Manual, Rev. B 31

60–61

Total number of user-addressable LBA sectors available

(see Section 2.2 for related information)

*Note: The maximum value allowed in this field is: 0FFFFFFFh

(268,435,455 sectors, 137 Gbytes). Drives with capacities over 137

Gbytes will have 0FFFFFFFh in this field and the actual number of

user-addressable LBAs specified in words 100-103. This is required

for drives that support the 48-bit addressing feature.

0FFFFFFFh*

62 Retired 0000H

63 Multiword DMA active and modes supported (see note following this

table) xx07H

64 Advanced PIO modes supported (modes 3 and 4 supported) 0003

65 Minimum multiword DMA transfer cycle time per word (120 nsec) 0078

66 Recommended multiword DMA transfer cycle time per word (120

nsec) 0078H

67 Minimum PIO cycle time without IORDY flow control (240 nsec) 00F0

68 Minimum PIO cycle time with IORDY flow control (120 nsec) 0078

69–74 ATA-reserved 0000H

75 Queue depth 0000H

76 Serial ATA capabilities xxxxH

77 Reserved for future Serial ATA definition xxxxH

78 Serial ATA features supported xxxxH

79 Serial ATA features enabled xxxxH

80 Major version number 003EH

81 Minor version number 0000H

82 Command sets supported 364BH

83 Command sets supported 7C03

84 Command sets support extension (see note following this table)

4003H See Word 108-111 note.

(4003H = 0100000000000011

binary)

85 Command sets enabled 30xxH

86 Command sets enabled 0001H

87 Command sets enable extension 4000

88 Ultra DMA support and current mode (see note following this table) xx3F

89 Security erase time 0000H

90 Enhanced security erase time 0000

92 Master password revision code FFFEH

93 Hardware reset value xxxx H

95–99 ATA-reserved 0000H

Word Description Value

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

32 Pipeline HD.2 Series SATA Product Manual, Rev. B

Note. Advanced Power Management (APM) and Automatic Acoustic Management (AAM) features are not supported

Note. See the bit descriptions below for words 63, 84, and 88 of the Identify Drive data.

100–103

Total number of user-addressable LBA sectors available (see Section

2.2 for related information). These words are required for drives that

support the 48-bit addressing feature. Maximum value:

0000FFFFFFFFFFFFh.

ST31000424CS =1,953,525,168

ST31000322CS =1,953,525,168

ST3500414CS = 976,773,168

ST3500312CS = 976,773,168

ST3320413CS = 625,142,448

ST3320311CS = 625,142,448

ST3250312CS = 488,397,168

ST3160316CS = 312,581,808

104–107 ATA-reserved 0000H

108–111 The mandatory value of the world wide name (WWN) for the drive.

NOTE: This field is valid if word 84, bit 8 is set to 1 indicating 64-bit

WWN support.

Each drive will have a unique

value.

112–127 ATA-reserved 0000H

128 Security status 0001H

129–159 Seagate-reserved xxxxH

160–254 ATA-reserved 0000H

255 Integrity word xxA5H

Description (if bit is set to 1)

Bit Word 63

0 Multiword DMA mode 0 is supported.

1 Multiword DMA mode 1 is supported.

2 Multiword DMA mode 2 is supported.

8 Multiword DMA mode 0 is currently active.

9 Multiword DMA mode 1 is currently active.

10 Multiword DMA mode 2 is currently active.

Word Description Value

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Pipeline HD.2 Series SATA Product Manual, Rev. B 33

Bit Word 84

0 SMART error loggin is supported.

1 SMART self-test is supported.

2 Media serial number is supported.

3 Media Card Pass Through Command feature set is supported.

4 Streaming feature set is supported.

5 GPL feature set is supported.

6 WRITE DMA FUA EXT and WRITE MULTIPLE FUA EXT commands are supported.

7 WRITE DMA QUEUED FUA EXT command is supported.

8 64-bit World Wide Name is supported.

9-10 Obsolete.

11-12 Reserved for TLC.

13 IDLE IMMEDIATE command with IUNLOAD faeture is supported.

14 Shall be set to 1.

15 Shall be cleared to 0.

Bit Word 88

0 Ultra DMA mode 0 is supported.

1 Ultra DMA mode 1 is supported.

2 Ultra DMA mode 2 is supported.

3 Ultra DMA mode 3 is supported.

4 Ultra DMA mode 4 is supported.

5 Ultra DMA mode 5 is supported.

6 Ultra DMA mode 6 is supported.

8 Ultra DMA mode 0 is currently active.

9 Ultra DMA mode 1 is currently active.

10 Ultra DMA mode 2 is currently active.

11 Ultra DMA mode 3 is currently active.

12 Ultra DMA mode 4 is currently active.

13 Ultra DMA mode 5 is currently active.

14 Ultra DMA mode 6 is currently active.

Print Date:2009-May-5 09:42:43 CDT Released; Proto-Type; B; 100529372 Seagate Confidential

Produktspecifikationer

Varumärke:	Seagate
Kategori:	Hårddisk
Modell:	Pipeline HD 1-TB HDD
Färg på produkten:	Zwart
Vikt:	900 g
Bredd:	177.8 mm
Djup:	263 mm
Höjd:	37.2 mm
Förpackningens vikt:	1240 g
Förpackningens bredd:	360 mm
Djuppackning:	234 mm
Förpackningshöjd:	52 mm
Husmaterial:	Kunststof
Skärm diagonal:	10.1 "
Upplösning:	1280 x 800 Pixels
Ethernet LAN:	Ja
Monteringsmetod:	Wand/tafelblad
Typ av strömkälla:	DC, PoE
Betraktningsvinkel, horisontell:	170 °
Snabbstartsguide:	Ja
Ursprungsland:	Taiwan
Inbyggda högtalare:	Nee
Avsedd för:	Vergaderzaal
Bildförhållande:	16:10
Inspänning:	12 V
Färgdjup:	8 Bit
Ethernet LAN, dataöverföringshastigheter:	10,100,1000 Mbit/s
Typ av bakgrundsbelysning:	LED
siffra:	1
Förvaringstemperatur:	-10 - 55 °C
Antal RJ-45-portar:	1
Paket innehåll:	1 x VK430 10.1” RBS Panel with wall mount\n2 x LED bars\n4 x LED bar screws\n4 x hard wall mount screw + screw anchor\n2 x 3M glass mount tape\n1 x user instructions
Pekskärmsteknik:	Capacitief
Kontrastförhållande:	800:1
(Ytter) huvudpaketets höjd:	263 mm
(Ytter) huvudförpackningens bredd:	288 mm
(Ytter) huvudförpackningens bruttovikt:	6700 g
(Ytre) huvudpaketets längd:	370 mm
Wifi:	Nee
Drifttemperatur (TT):	0 - 40 °C
Relativ luftfuktighet i drift (VV):	10 - 80 procent
Type beeldscherm:	LCD
(Ytter) huvudförpackningens innehåll:	28033.68 cm³
Förpackningsvolym:	4530.7 cm³
Antal USB 2.0 Type-A-portar:	1