Senseair pSENSE Bruksanvisning

Senseair CO2 Sensor pSENSE

Läs nedan 📖 manual på svenska för Senseair pSENSE (15 sidor) i kategorin CO2 Sensor. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/15

OPERATION MANUAL

PORTABLE CO METER

Model:

pSENSE

pSENSE RH

INTRODUCTION

Features:

Triple displays of CO level, temp.

and humidity (pSENSE RH).

asy calibration

humidity

PC connect

Stable NDIR sensor for CO detection

Statistics of weighted average

TWA (8 hours weighted average)

STEL(15 minutes weighted average)

Backlight for working in dark area

Audile CO warning alarm

Battery and adaptor power supply

E manual on CO and

(RH for pSENSE RH only)

via RS232 interface

Thank you for purchasing this portable

CO meter. The me ter measures CO

2 2

level, air temp ., dew point, wet bulb temp .

and humi dity(DP, WB , RH are for model

pSENSE RH) and is an ideal instrume nt

for indoor air quality (IAQ) diagnosis.

Poor indoor air quality is considered

unhealthy because it causes tiredness,

loss of ability to concentrate, and even

illness(ex. Sick Building Syndrome ). IAQ

monitoring and survey, especially on CO

level and air ventilation become widely

applied in public areas such as offices,

classrooms, factories, hospitals and

hotels. It is also suggested in regulations

of industrial hygiene in some countries.

(Appendix)

The portable CO me ter uses NDIR (non-

dispersive infrared) technology to ensure

the reliability and long term stability. It’s

useful in verifying HVAC system perform-

ance and air ventilation control.

MATERIAL SUPPLIED

Meter

4pcs AA batteries

Operation manual

Hard carrying case

This package contains:

Optional accessory:

Calibration kit 33% and 75% (00-0-0017)

RS232 cable and software

Adaptor (9V/100~240Vac)

(00-0-0018)

POWER SUPPLY

The meter is powered by either 4 AA

batteries or a DC adaptor(9V/1A output).

Install the batteries into the battery

compartment on the rear and make sure

they are in correct polarity and good

contact.

“Lob” will appear on the LCD .

And beeper sounds.

atter

When an adaptor is used, it will

cut off the power supply from batteries.

The adaptor can’t be used as a battery

charger.

When battery voltage gets low, a

(Fig.1)

The CO sensor

can’t work under low voltage, so it beeps

to indicate failed CO measurement

(press any key but to stop the beeps)

and the readings won’t be displayed.

Please replace with fresh b ies or

connect with an adaptor.

CO2

pSENSE pSENSE RH

Fig.1

SET

Produktspecifikationer

Varumärke:	Senseair
Kategori:	CO2 Sensor
Modell:	pSENSE
Färg på produkten:	Zwart
Vikt:	695 g
Plugg typ:	Type N
Förpackningens vikt:	2400 g
Förpackningens bredd:	192 mm
Djuppackning:	382 mm
Förpackningshöjd:	91 mm
Användarmanual:	Ja
Husmaterial:	Staal
LED-indikatorer:	Ja
Nuvarande:	1.2 A
Inkluderar AC-adapter:	Ja
Certifiering:	CE, FCC, REACH, TAA
Gränssnitt:	USB 3.2 Gen 1 (3.1 Gen 1)
Hållbarhetscertifikat:	RoHS
Förvaringstemperatur:	-20 - 85 °C
Antal fans:	0 ventilator(en)
Utström:	7 A
Spännande:	12 V
Mått (B x D x H):	90 x 194 x 35 mm
Förpackningens längd:	382 mm
Hårddiskstorlekar som stöds:	2.5, 3.5 "
Chipset:	Xilinx - SPARTAN-6
(Ytter) huvudpaketets höjd:	301 mm
(Ytter) huvudförpackningens bredd:	395 mm
(Ytre) huvudpaketets längd:	474 mm
Kvantitet per (yttre) huvudkartong:	7 stuk(s)
AC-ingångsspänning:	110 - 240 V
Strömförbrukning (typiskt):	90 W
Drifttemperatur (TT):	5 - 45 °C
Relativ luftfuktighet i drift (VV):	20 - 80 procent
Typ produkt:	HDD-duplicator
Inkluderade typer av nätkontakter:	AU, EU, NA, UK, US
Hårddiskanslutningar som stöds:	SAS, SAS-2, Serial ATA, Serial ATA II, Serial ATA III
Antal samtidiga kopior:	2 kopieën
Dupliceringslägen:	Copy, Erase
Antal kuddar ingår:	2
Portmultiplikator:	Nee
Överföringsmängd:	13 GB/min