SentrySafe QAP2EL Bruksanvisning
SentrySafe
Valv
QAP2EL
Läs nedan 📖 manual på svenska för SentrySafe QAP2EL (19 sidor) i kategorin Valv. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/19
XL Quick Access Pistol Safe
Owner’s Manual
QAP2BEL
QAP2E/ QAP2EL
2
Table of ContentsWarnings
WARNING
SentrySafe recommends that you do not store guns in this unit.loaded
NOTICE
YOUR SAFE IS ONLY PART OF YOUR TOTAL SECURITY PROTECTION.
SentrySafe recommends that you store your safe in a closet, office, basement, bedroom or any
other location that is convenient for you but out of direct line of sight from prying eyes.
The location of the safe does not affect the safe’s ability to protect your valuables inside.
This is a California-approved firearm safety device that meets the requirements of Penal Code
section 23655 and the regulations issued thereunder.
1 2 3 4
4
NOTE: Store code and keys in a secure location (other than in the safe).
NOTE: SentrySafe offers a secure on-line location for the entry and retrieval of your code.
Go to and register your safe. www.registermysafe.com
Insert key into keyhole and turn clockwise.
NOTE: Do not lock key inside safe – this is an override key and will
open the safe in the event that you have lost your code.
A Remove the battery pack cover.
B Pull out battery pack (keep battery pack connected
to wires).
C Insert four NEW AA alkaline batteries.
IMPORTANT
All safe models initially work with the factory code 1, 2, 3, 4, 1. It is therefore
important to re-program your safe with a new user code you have personally
selected to provide maximum security.
The XL Quick Access Pistol Safe comes with a built-in code.
Factory code 1, 2, 3, 4, 1.
Press any button once to bring the safe out of standby mode, then
enter the Factory Code 1, 2, 3, 4, 1.
The Green LED will light.
To Program an Electronic Code
A Find the Reset button located behind the battery pack.
B Press and hold the Reset button until the keypad flashes 3 times.
The LEDs remain on to indicate it is ready to accept a new user code.
C Enter a user code that is four, five or six digits long.
D A successful programming of the user code is indicated when the
LED light flashes green three times.
Programming Your Safe
Preparing your safe for first-time use
Programming your safe
Programming Your Safe
NOTE: Do not use rechargeable batteries or any other type of non-alkaline battery.
Do not mix old and new batteries. Do not mix alkaline and standard batteries.
A
Produktspecifikationer
Varumärke: | SentrySafe |
Kategori: | Valv |
Modell: | QAP2EL |
Behöver du hjälp?
Om du behöver hjälp med SentrySafe QAP2EL ställ en fråga nedan och andra användare kommer att svara dig
Valv SentrySafe Manualer
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
Valv Manualer
- Valv Philips
- Valv Honeywell
- Valv Abus
- Valv Ferm
- Valv Salvus
- Valv Workzone
- Valv Nedis
- Valv Yale
- Valv SereneLife
- Valv Hard Head
- Valv Dometic
- Valv First Austria
- Valv Master Lock
- Valv Steren
- Valv Perel
- Valv Burg-Wachter
- Valv Royal Sovereign
- Valv Phoenix
- Valv Olympia
- Valv Kidde
- Valv Challenge
- Valv Topcraft
- Valv Barska
- Valv First Alert
- Valv Sygonix
- Valv Conrad
- Valv Fluke
- Valv Varo
- Valv Sentry
- Valv Filex
- Valv Kreator
- Valv Westfalia
- Valv Nauta
- Valv Jewel
- Valv Sistec
- Valv SMC
- Valv Kogan
- Valv FireKing
- Valv Rottner Tresor
- Valv Olymp
- Valv Oxloc
- Valv Suncast
- Valv Winholt
- Valv Protector
- Valv Homak Security
- Valv NOFIRE
- Valv Technomax
- Valv Kreator-Varo
- Valv MSW
- Valv M-Locks
- Valv Fichero
- Valv EasySafe
- Valv ROMA
- Valv Stamony
Nyaste Valv Manualer
9 Januari 2025
7 Januari 2025
1 Januari 2025
31 December 2025
31 December 2025
31 December 2025
30 December 2025
28 December 2024
20 December 2024
14 December 2024