SentrySafe V252 Bruksanvisning
SentrySafe
Valv
V252
Läs nedan 📖 manual på svenska för SentrySafe V252 (8 sidor) i kategorin Valv. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/8
TABLE OF CONTENTS
For safes with key lock only . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
For safes with combination and key lock . . . . . . . . . . . . . . . . . . . . . .2
For safes with electronic lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2-3
Lost keys or combination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Bolt-down Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
TABLE DES MATIÈRES
Pour coffres-forts munis uniquement d’une serrure à clé . . . . . .4
Pour coffres-forts munis d’une serrure à clé
et d’une combinaison . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Pour coffres-forts munis d’une serrure électronique à clé . . . .4-5
Clés égarées ou combinaison oubliées . . . . . . . . . . . . . . . . . . . . . . .5
Instructions de boulonnage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Garantie . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
ÍNDICE
Para cajas fuertes con cerradura solamente . . . . . . . . . . . . . . . . . .6
Para cajas fuertes con combinación y cerradura . . . . . . . . . . . . . . .6
Para cajas fuertes con cerradura electrónica . . . . . . . . . . . . . . . .6-7
Llaves o combinación perdidas . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Instrucciones de empernado . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Garantía . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
Serial No.
➧
Combination
➧
(Not All Models)
Factory Code
➧
(Electronic Lock Models Only)
N° de série
➧
Combinaison
➧
(Pas pour tous les modèles)
Code de fabricant
➧
(Seulement pour les modèles
à serrure électronique)
No. de serie
➧
Combinación
➧
(No todos los modelos)
Código de fábrica
➧
(Sólo enlos modelos con
cerradura electrónica)
Security Safe
Owner’s Manual
Coffre-fort de sécurité
Manuel du propriétaire Caja fuerte de seguridad
Manual del Usuario
Thank you for purchasing this
Sentry product.
Your Sentry safe is equipped with a high security key lock with
three (3) keys.
For safes with key lock only
To unlock:
1. Insert the key, aligning the small raised bump on the key
head with the red dot at the top of the lock. (NOTE: The
side of the key head having the small raised bump will be
facing to the left.)
2. Turn the key one-quarter turn to the right. Do not force the
key or it could break.
To lock:
1. Insert the key so that the raised bump side of the key head
is facing up.
2. Turn the key one-quarter turn to the left.
3. Remove the key and store in a safe place.
For safes with combination
and key lock
Both key and combination are necessary to open safe.
Dial the combination first.
Open unit first, then test
with door open!
Test your combination several times with the door open, to make
sure you have recorded it correctly. Your combination is ready
to use.
3-NUMBER COMBINATION
(Cannot be changed.)
1. Start with dial on zero.
2. Turn dial three turns and stop at LEFT
3. Turn dial RIGHT stopping second
time on
4. Turn dial LEFT stopping first time on
4-NUMBER COMBINATION
NOTE: Changing the combination voids your warranty
for assistance with lost combination and
locksmith services needed.
1. Start with dial on zero.
2. Turn dial four turns and stop atLEFT
3. Turn dial RIGHT stopping third
time on
4. Turn dial LEFT stopping second
time on
5. Turn dial RIGHT stopping first
time on
KEY:
After dialing combination, insert key, matching red dot on lock
with round bump on key. Turn key to the right (clockwise) and
pull to open door.
To Close and Lock
With the door closed, turn key left (counterclockwise), then spin
the combination dial several times.
After closing the door, remove the key and keep it in a secure
place.
For safes with electronic
and key lock
To activate lock
To power the lock, four alkaline AA batteries (not included)
are required.
NOTE: ARE Non-alkaline and rechargeable batteries
NOT RECOMMENDED.
To install batteries, slide open the battery cover located just
below the keypad. Insert a paper clip or pen point into the small
hole in the cover. Push in while sliding cover to the right. (Fig. A)
Disconnect and remove the battery holder.
Insert the four batteries as indicated, reconnect the connector
and put back the battery holder. Slide cover back in place.
Open unit first, then test
with door open!
(See cover of this manual for your factory code.)
Test your factory code several times with the door open.
NOTE: Your unit has been provided with two (2) sets of
keys. There is a set of four-bitted keys that operates the lock on
the door, while the second set of keys (skeleton keys) operates
the key override explained later in this manual.
1. Insert the four-bitted key into the lock to the left of
the key pad. Be sure key lock is turned as far
to the left as possible.
2. Press the five-digit factory code. The greenlight will come on.
3. Turn the key to the right.
4. Open the door.
Using the keypad
Caution!
Liquids can damage the keypad!
Caution!
Pen points or other sharp objects can puncture
the keypad membrane!
Only a light touch is needed. A green PROCEED light and a single
beep indicate that the keypad “felt” your touch. The lock allows
5 seconds for each key press. If you pause longer, an error signal
will occur (blinking red light and three beeps), indicating you
should start over.
Access codes
There are three possible ways to unlock and access the safe—
by entering its preset Factory Code, your own User Code or
a Password.
You can always open the safe by entering the 5-digit Factory
Code. But if you prefer to use your own code, you can program
the safe to open to the 5-digit User Code of your choice. If you
wish to give someone else temporary access to the safe, you can
program a Password that can later be erased.
Programming a user code
There are two ways to program a user code.
A 1. Press the Program key.
2. Enter the Factory Code. The green LED remains ON
while you enter the 5-digit user code of your choice.
After 5 digits are entered the green LED turns OFF.
(To enter a new User Code, repeat these steps.)
B 1. Press the red button inside the safe. The lock will
“beep” and the green LED will come on.
2. Enter a 5-digit user code.
(To enter a new User Code, repeat these steps.)
Keep your new user code secure.
For your records, please copy it here:
____–____–____–____–____
Programming a password
1. Press the Program key.
2. Press it a second time.
3. Enter your 5-digit User Code. The green LED remains ON.
4. Enter the 5-digit Password of your choice (any combination
except 00000.) After 5 digits are entered, the green LED
turns OFF.
(To enter a new Password, repeat these steps. To erase the
Password, press Program twice, enter your User Code and then
enter 00000.)
2
A
Battery replacement
When old batteries are removed for replacement, your Password
will be voided; only Factory and User Codes will work. To
reestablish your Password, follow the directions above under
“Programming a Password” .
Key override
If your electronic lock fails or you do not have any codes
available, you may use a key override to access this unit.
1. Remove the battery cover, disconnect and remove the
battery holder.
2. Insert the skeleton key (second set of keys provided)
into the key hole inside the opening for the battery.
3. Turn the key to the right.
4. Turn the four-bitted key to the right.
5. Open the door.
Signals
Your electronic-lock safe communicates by means of several
audio/visual signals.
Red (Error) LED + three beeps indicates
one of the following:
1. You have pressed Program key out of sequence
2. You have entered an invalid code or password.
3. You have let 5 seconds or more elapse between key entries.
Green (Proceed) LED + single beep occurs
1. After entering each digit of Factory or User Code, or
Password
2. After pressing Clear key
3. After pressing Program key
Green LED only
1. Comes ON after you enter a valid code/password and
remains lit during the 4-second period in which the safe
can be opened.
2. Comes ON in the Program User Code mode after you enter
the Factory Code and remains lit until you have finished
entering a 5-digit User Code.
3. Comes ON in the Program Password mode after you have
entered your User Code and remains ON until you have
entered a 5-digit password.
Yellow LED
Indicates “low battery” and will typically not turn ON until
battery has been in use approximately two years or longer.
Your electronic lock automatically performs a low battery test
during each lock use.
If a “low battery” condition is detected the Yellow LED will
come ON and remain ON during each subsequent lock
operation. (The lock will continue to function in a Low Battery
state, until battery failure.) The Yellow LED will turn OFF only
after three consecutive “Good Battery” readings or after the low
batteries are replaced. (Note: If the new batteries are installed
in less than 60 seconds the Yellow LED may come ON and stay
ON during the first lock operation before it returns to OFF.)
NOTE: It is recommended you replace the batteries after two
years, or when the yellow LED remains on.
Lost keys or combination
First, find your safe’s Serial Number. The Serial Number is
printed on the small label on the right side of safe (outside).
Send this, a notarized letter(last name must be different)
stating you are the safe’s owner, and a check or money order
for $8.00 (U.S. funds) to: Sentry Group, Dept. 200, 882 Linden
Avenue, Rochester, NY 14625-2784 USA. If using a credit card
(Visa/Mastercard only), call 1-800-828-1438.
Questions?
CallSentryCustomerService:1-800-828-1438 or 585-381-4900
8 am –9 pm E.S.T., M–F.
Bolt-down instructions
To help provide maximum security, Sentry strongly recommends
this safe be bolted down.
1. Select a suitable and convenient location for your safe. Set
the safe in place and use the holes provided in the bottom
or back of the safe to mark the location of the holes to be
drilled in the floor or wall. It is not recommended to attempt
to bolt to both floor and wall. If bolting to a wall, please
ensure that the safe is resting on a supporting surface,
i.e. floor, table or shelf.
2. Move the safe away and drill holes of the appropriate
diameter and depth for the type of hardware being used
and the mounting surface (2 each — bolts, washers and
masonry anchors).
3. Place the safe back over the holes and install the fasteners
as required.
4. NOTE: For maximum security on models which have feet,
remove feet before bolting to floor.
100% customer
satisfaction guarantee
If at any time during the first ninety (90) days after the date of
purchase, you are not entirely satisfied with this Sentry product,
please call us toll-free at 1-800-828-1438. Dated receipt required
as proof of purchase. We’ll solve the problem or ensure that you
receive a replacement or full refund.
--The employees of Sentry Group
1 year limited warranty
This product is warranted to the original purchaser for one year (1) from
the date of purchase to be free of structural and mechanical defects due
to faulty materials or workmanship. If a structural or mechanical defect
occurs during the warranty period, Sentry Group (also referred to as
“Sentry”) will repair or replace the defective part(s) or product, at its
option, at no charge. Replacement unit is provided with curbside delivery
only. Additional expense for inside delivery is the responsibility of the
consumer. Sentry will not cover additional costs for installation of the
replacement unit.
For Warranty Service (North America only)
Please notify the Sentry Group Customer Service Department of the
problemby phone(at 1-800-828-1438 or 585-381-4900, 8 a.m. through
9 p.m. EST, M-F) or in writing to Sentry Group, 882 Linden Avenue,
Rochester, New York 14625-2784, U.S.A. Do not ship your product
back to Sentry Group. The Sentry Group Customer Service
Department will decide either to have the product returned, repaired,
replaced, or refund your money.
Proof of Purchase Date
For all Sentry Group products, a dated store receipt is required as proof
of purchase.
Limitations Of Warranty
1. Sentry’s responsibility and the buyer’s exclusive remedy under this
warranty are limited to the repair or replacement of the defective
part(s) or product, at Sentry’s option. In no event shall Sentry be
liable for any incidental or consequential damages (including but not
limited to loss or damage due to fire, water, theft or vandalism) to
persons or property resulting from the breach of this or any other
express or implied warranty applicable to the product. Some states,
provinces and countries do not allow the exclusion or limitation of
incidental or consequential damages, so the above limitation or
exclusion may not apply to you.
2. Except as may be otherwise provided by applicable law,
Sentry disclaims any and all other covenants and
warranties, whether written or oral, express or implied,
including, but not limited to, the implied warranties of
merchantability and fitness for a particular purpose.
The implied warranty applicable to this product shall not exceed
the standard one year limited warranty. Some states, provinces
and countries do not allow disclaimers of implied warranties or
limitations on their duration, so the above disclaimer and/or
limitation may not apply to you.
3. Sentry is not responsible for damage, defects, or malfunction to
the product incurred during shipment. The product was packed in
accordance with Interstate Commerce Commission specifications,
and with reasonable handling, should be in good condition on
arrival. Any claims for shipping damage should be made directly
to the carrier.
4. These warranties do not cover defects, damage, or malfunction
caused by modification, alteration, repair or service of the product by
anyone other than Sentry or its authorized representative, or caused
by physical abuse to or misuse of the product. Sentry specifically
disclaims coverage for damage that may result from the product
being bolted-down and/or damage that may result from the improper
handling of the product during moving and/or installation.
5. No Sentry agent, employee, representative, dealer or retailer has the
authority to make or imply any representation, promise or agreement
which in any way varies the terms of this Limited Warranty.
6. This Limited Warranty shall apply to new, first quality Sentry products
and shall not apply to factory seconds or previously-owned products,
or products previously damaged by such events including,but not
limited to, fire, flood, earthquake, burglary, handling by movers
or installers.
All of the provisions of this Limited Warranty are separate and severable.
If any provision is held invalid and unenforceable, such determination
shall not affect the validity or enforceability of the other provisions. This
Limited Warranty gives you specific legal rights, and you may also have
other rights which vary from state to state, province to province, or
country to country.
3
Produktspecifikationer
| Varumärke: | SentrySafe |
| Kategori: | Valv |
| Modell: | V252 |
Behöver du hjälp?
Om du behöver hjälp med SentrySafe V252 ställ en fråga nedan och andra användare kommer att svara dig
Valv SentrySafe Manualer
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
1 Oktober 2024
Valv Manualer
- Valv Philips
- Valv Honeywell
- Valv Abus
- Valv Salvus
- Valv Workzone
- Valv Nedis
- Valv Yale
- Valv SereneLife
- Valv Hard Head
- Valv Dometic
- Valv Master Lock
- Valv Perel
- Valv Burg-Wachter
- Valv Phoenix
- Valv Olympia
- Valv Kidde
- Valv Topcraft
- Valv Barska
- Valv First Alert
- Valv Sygonix
- Valv Conrad
- Valv Fluke
- Valv Varo
- Valv Sentry
- Valv Filex
- Valv Kreator
- Valv Sistec
- Valv SMC
- Valv FireKing
- Valv Rottner Tresor
- Valv Olymp
- Valv Suncast
- Valv Protector
- Valv Homak Security
- Valv NOFIRE
- Valv Technomax
- Valv Kreator-Varo
- Valv M-Locks
- Valv Fichero
- Valv EasySafe
- Valv ROMA
- Valv Stamony
Nyaste Valv Manualer
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
26 Oktober 2024
20 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024
15 Oktober 2024