Sharp SMD2440JS Bruksanvisning

Sharp Magnetron SMD2440JS

Läs nedan 📖 manual på svenska för Sharp SMD2440JS (8 sidor) i kategorin Magnetron. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/8

Sharp Microwave Drawer™ Oven: SMD2440JS

INSTALLATION MANUAL

SPECIAL WARNING

Installation and service must be performed by a qualiﬁed

installer.

IMPORTANT: Save this installation manual for local

electrical inspector's use and future reference.

CLEARANCES AND DIMENSIONS

Do not install this appliance in any combustible cabinetry,

which is not in accord with the stated clearances and

dimensions on pages 2–5. See Figures 1–7.

SAFELY LIFT AND MOVE UNIT

Two people are required to safely lift and move this unit.

UNPACKING THE APPLIANCE

• Remove all packing materials from inside the Sharp Microwave

Drawer™ Oven. DO NOT REMOVE THE WAVEGUIDE

COVER, which is located on the top of the Sharp Microwave

Drawer™ Oven.

Sealing

Surface

Oven

Cavity

Waveguide

Cover

Sealing

Surface

• Remove the protective lm from the touch control area. Addition-

ally, remove the feature sticker, if there is one. Check the drawer

for any damage, such as misaligned or bent drawer, damaged

drawer seals and sealing surfaces, broken or loose drawer guides

and dents inside the cavity or on the front side of the drawer. If

there is any damage, do not operate the Sharp Microwave Drawer

™

Oven and contact your dealer or a Sharp authorized servicer.

IMPORTANT NOTES TO THE INSTALLER

• Read the entire Installation Manual before installing the Sharp

Microwave Drawer™ Oven.

• Remove all packing material before connecting the electrical

supply. Manually pull open the drawer to ensure all packing

material is removed prior to connection and installation.

• Observe all governing codes and ordinances.

• Leave these instructions with the consumer.

IMPORTANT NOTES TO THE CONSUMER

Keep this manual with your Operation Manual for future reference.

• Read and follow the safety precautions listed in the operation

manual.

• Ensure your Sharp Microwave Drawer

™ Oven is installed and

grounded properly by a qualied installer or service technician.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

If the information in this manual is not followed

exactly, a re or electrical shock may result that could cause property

damage, personal injury or death.

WARNING

To reduce the risk of tipping, the Sharp Microwave

Drawer™ Oven must be secured by a properly installed Anti-Tip block.

• This appliance must be electrically grounded in accordance with

local codes.

• Ensure the wall coverings and the cabinets around the appli-

ance can withstand the heat generated by the Sharp Microwave

Drawer™ Oven.

WARNING

Never leave children alone or unattended

in the area where the Sharp Microwave Drawer™ Oven is

in use. Never leave the drawer open when the appliance is

unattended.

WARNING

Stepping, leaning or sitting on the drawer may

result in serious injuries and can also cause damage to the

Sharp Microwave Drawer

™ Oven.

• Do not use the Sharp Microwave Drawer™ Oven as a storage space,

as this creates a potentially hazardous situation.

• Check that the time-of-day is in the display. If not, touch STOP/

CLEAR for safety reasons and to prevent unintended use.

Figure 1

Figure 2

A. 6"

B. Suggested electrical

outlet location*

C. Anti-Tip block

D. 5"

E. 31/2"

F. 4"

G. 221/8" opening

H. 1413/16" to bottom of

Anti-Tip block

I. Allow 7/8" overlap

J. 231/2" minimum depth

K. Allow 1/4" overlap

L. 36" countertop height

M. Allow 1/4" minimum

space

N. Floor must support

100 lb

O. 24" cabinet minimum

P. 1413

/16" opening

Figures 1 and 2 contain many measurements for reference when

planning the Sharp Microwave Drawer

™ Oven location.

* Can also be installed using an electrical outlet in an adjacent cabinet

within the area where the provided electrical cord can reach. Power

cord access hole in cabinet should be a minimum 11/2" diameter hole

and deburred of all sharp edges.

IMPORTANT Always allow sufcient power cord length to the

electrical outlet to prevent tension.

Always check electrical codes for requirements.

A. 215/8"

B. 411/16"

C. 13/4"

D. 217/8"

E. 235/8"

F. 151/16"

G. 145/8"

H. 19/16" door thickness

I. 15" auto drawer opening

J. 4"

CLEARANCES AND DIMENSIONS

• Dimensions shown in Figure 1 must be used. Given dimensions

provide minimum clearance. Locate electrical outlet in the shaded

area in the upper left-hand corner of the cutout. See Figure 9.

• Contact surface must be solid and level. Pay special attention to

the oor on which the Sharp Microwave Drawer

™ Oven will sit.

The oor of the opening should be constructed of plywood strong

enough to support the weight of the oven (about 100 pounds).

• Check location where the Sharp Microwave Drawer

™ Oven will

be installed for proper electrical supply.

• If installing below a wall oven, ensure the clearance of the oor

between the wall oven and the Sharp Microwave Drawer

™ Oven

is a minimum of 2".

• The oven can also be mounted ush. See page 4 for ush mounting

instructions.

• Your oven can be built into a cabinet or wall as a stand-alone unit.

It can be installed under gas or electric wall ovens and the Sharp

Combi Steam Oven/Wall Oven Models ovens or under the Sharp

cooktops listed below.

COMBI STEAM OVEN/

WALL OVEN MODELS

COOKTOP

MODELS

• SSC3088AS

• SSC2489DS

• SSC2489GS

• SWA2450GS

• SDH3042DB

• SDH3652DB

• SCH3043GB

• SCH2443GB

• SCR3042FB

• SCR2442FB

24" MICROWAVE DRAWER™ STANDARD MOUNT AND MEASUREMENTS

Figure 3 represents a typical standard cabinet. If installed in

custom cabinets with extended countertops, take into account

visibility and access to controls. See Figure 4.

Move oven location downward for

extended countertops

Extended countertops

Figure 4

Figure 3

A. 25"

B. 1/2" minimum

C. 151/16"

D. 36"

E. 341/2"

F. 24"

Produktspecifikationer

Varumärke:	Sharp
Kategori:	Magnetron
Modell:	SMD2440JS
Färg på produkten:	Rood
Vikt:	88 g
Bredd:	16 mm
Djup:	159 mm
Höjd:	69 mm
Förpackningens vikt:	157 g
Förpackningens bredd:	157 mm
Djuppackning:	217 mm
Förpackningshöjd:	40 mm
Instruktioner:	Ja
Certifiering:	CE, FCC, TAA, REACH
Hållbarhetscertifikat:	RoHS
Plug and play:	Ja
siffra:	1
Förvaringstemperatur:	-25 - 70 °C
Internera:	Ja
Medeltid mellan fel (MTBF):	3336103 uur
Värdgränssnitt:	PCIe
Inklusive skruvar:	Ja
Monteringsfästen ingår:	Ja
Chipset:	ASMedia - ASM2824
(Ytter) huvudpaketets höjd:	495 mm
(Ytter) huvudförpackningens bredd:	340 mm
(Ytre) huvudpaketets längd:	460 mm
Kvantitet per (yttre) huvudkartong:	40 stuk(s)
Drifttemperatur (TT):	0 - 70 °C
Relativ luftfuktighet i drift (VV):	15 - 90 procent
Harmoniserad systemkod (HS):	84733020
Hot-swap:	Ja
Expansionskort standard:	PCI 3.0
Dataöverföringshastighet (max):	8 Gbit/s
Utgångsgränssnitt:	M.2
Antal M.2 (M) platser:	2
Stöd för lagringsenhetshöjder:	22 mm
SATA-kontaktens ingångscykler:	60