Skytec STX-120 Bruksanvisning

Skytec DJ-utrustning STX-120

Läs nedan 📖 manual på svenska för Skytec STX-120 (23 sidor) i kategorin DJ-utrustning. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/23

PROFESSIONAL DUAL CD/USB/SD

MIXING CONSOLE

USER’S MANUAL

HANDLEIDING

GEBRAUCHSANLEITUNG

TOP VIEW

IMPORTANT

Use of controls or adjustments or performance of procedures other than those specified herein may

result in hazardous radiation exposure.

CD player Function:

1. JOG & SHUTTLE WHEELS

Shuttle: Use the dial to select the scanning direction and speed. The disc is scanned in the

forward direction when the shuttle dial is turned clockwise from the neutral position, in the reverse

direction when the shuttle dial is turned counterclockwise. The scanning speeds up when the

shuttle dial is turned faster.

Jog: In pause mode, if you turn the jog, the point at which the sound is being produced moves by

a number of frames corresponding to the number of clicks. Clockwise moves the point forward;

counterclockwise moves the point backward. In play mode, the jog increases or decreases the

speed of the song. (Clockwise: increase, counterclockwise: decrease).

2. PLAY/PAUSE BUTTON

Each time you press the PLAY/PAUSE button, the operation changes from play to pause or from

pause to play.

3. CUE BUTTON

Pressing the CUE button during play provides a return to the position at which play was started.

4. PITCH CONTROL

Use this fader to increase or decrease the speed of the track.

4. DISPLAY

LCD Display lndicate the Track/Numbers/Time/Remain/Pitch/Continue/Single.

5. IN BUTTON ( LOOP SYSTEM )

This button sets the beginning of the loop. The Loop indicator on the display flashes.

6. OUT BUTTON ( LOOP BUTTON )

When you press this button, you set the end point of the seamless loop and you start the loop. To

finish the loop, press again this button.

7. RELOOP BUTTON ( LOOP SYSTEM )

This button is used to start the last saved loop. To finish the loop, press the reloop button.

8. CONT. / SINGLE BUTTON

Press these to switch between the SINGLE and CONTINUOUS play mode. The selected mode is

indicated on the LCD. In SINGLE mode, after each track, the unit stops the reading. In

CONTINUOUS mode, the unit read all track and stops.

9. REPEAT BUTTON

Use this button to repeat one track or all the track of the CD.

10. TIME BUTTON

Used this knob to choose the time mode : Elapsed time, remaining time or total remaining time.

11. OPEN/CLOSE BUTTON

Press to load or eject disk. Each press will open or close the disk tray.

NOTE: disc holder will not open unless stop or pause button has been pushed fir.

12. TRACK SELECT BUTTONS

Pressing 0-9 buttons, allow you to select tracks from the CD.

13. CD/USB/SD BUTTON

Press this button to choose CD or USB or SD mode while USB connect and the CDs in the tray

and the SD CARD insert the main unit.

14. PROG BUTTON

In STOP mode, you can program several tracks (20 tracks max.):

- Press the STOP button to enter in the stop mode

- Press the PROG button to enter in the program mode

- Use the skip track buttons to choose the track you want to listen then press the PROG button to

enter your choice.

- Use one more time the skip track buttons to choose the track you want to listen then press the

PROG button to enter your choice.

- Repeat the operation to select all the track you want to listen

- Press the PLAY / PAUSE button to start the playback

15. PITCH BEND - BUTTON

The pitch will drop while the - button is pressed and return to the original pitch when it is released.

16. USB PORT

Allows the connection of any USB memory stick.

17. PITCH BEND + BUTTON

The pitch will automatically rise when the + button is pressed and return to the original pitch when

it is released.

Produktspecifikationer

Varumärke:	Skytec
Kategori:	DJ-utrustning
Modell:	STX-120
Färg på produkten:	Grijs
Användarmanual:	Ja
LED-indikatorer:	Stroom
Frekvens:	433.92 MHz
Maximal-räckvidd:	30 m
Antal-produkter-ingår:	1 stuk(s)