Smeg SFU4104VCS Bruksanvisning

Smeg Ugn SFU4104VCS

Läs nedan 📖 manual på svenska för Smeg SFU4104VCS (16 sidor) i kategorin Ugn. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/16
Table of Contents
3
EN
1 Installation 6
1.1 General installation instructions 6
1.2 Electrical requirements 7
1.3 Electrical connection 8
1.4 Cable replacement 10
1.5 Positioning 11
Important Safety Instructions
WARNING: If the instructions contained in this manual are not followed
precisely, fire or explosion may result causing property damage, personal
injury or death.
NOTE: This appliance must be installed solely and exclusively by a qualified
technician. Any technical procedures must be carried out by an authorized
technician.
READ AND SAVE THESE INSTRUCTIONS - Your safety and the safety of
others are very important.
We have provided many important safety messages throughout this manual and
on the appliance.
Read all the instructions before using the appliance and always obey all safety
messages.
RECOGNIZE SAFETY INFORMATION
This is a safety alert symbol. This symbol alerts you to potential hazards that can
result in severe personal injury or death.
UNDERSTAND SIGNAL WORDS
A signal word - DANGER, WARNING or CAUTION - is used with the safety alert
symbol. DANGER denotes the most serious hazards. It means you could be killed
or seriously injured if you do not immediately follow the instructions. WARNING
means you could be killed or seriously injured if the instructions are not followed.
CAUTION indicates a potentially hazardous situation which, if not avoided, could
result in minor to moderate injury.
Important Safety Instructions
4
The safety messages will inform you of potential hazards, how to avoid the risk of injury and
what can occur if the instructions are not followed.
IMPORTANT: Installation and grounding must conform to applicable codes. Observe
all codes and ordinances in force.
Do not store or use gasoline or other flammable vapors, liquids or materials near this or any
other appliance.
• Read all instructions
• Proper installation is your responsibility. Have a qualified technician install and ground
this appliance in accordance with these installation instructions.
WARNING
• This appliance is intended for home use only.
• Use this appliance only for its intended purpose. The
manufacturer cannot be held liable for damage caused by
improper use of this appliance.
• This appliance complies with current safety regulations.
Improper use of this appliance can result in personal injury
and material damage.
• Read all the instructions before installing or using the
appliance for the first time.
• Keep these operating instructions in a safe place and pass
them on to any future user.
WARNING: For your safety, the instructions contained in this manual must be
followed to minimize the risk of fire or explosion and to prevent property damage,
personal injury or death.
NOTE: This appliance is NOT designed for installation in manufactured (mobile)
homes or in recreational vehicles (RVs).
DO NOT install this appliance outdoors.
WARNING To reduce the risk of fire, electrical shock, personal injury or
damage when using the appliance, follow basic safety
precautions, including the following:
Important Safety Instructions
5
EN
• It is the responsibility of the installer to
comply with installation information
specified on the model/serial ID plate.
The ID Plates are visibly located on the
back of the appliance and on the oven
door frame. These ID plates must never
be removed.
• ELECTRICAL GROUNDING
REQUIRED: See the “Electrical
Requirementssection. It is the customer’s
responsibility to:
• Contact a qualified electrician to install
the appliance
• Ensure that the electrical system is
adequate and conforms with the national
ANSI / NFPA 70 ELECTRICAL CODE
latest edition – or the CANADIAN
ELECTRICAL CODE, C22.11 – 1 and
C22.2 No. 01982 – or latest edition –
and all local codes and ordinances.
IMPORTANT: Observe all governing
codes and ordinances.
Make sure that all the appliance controls
are in the OFF position before plugging
the electrical cord into an outlet.
Never modify or alter the construction of
the appliance. For example, do not
remove adjustable legs, panels, wiring
or anti-tip brackets/screws.
• Do not obstruct oven vents or openings
for heat exhaust.
• Test the appliance immediately after
installation, following the instructions in
this booklet. If the appliance does not
work properly, disconnect it from the
electrical power supply and call the
service center. DO NOT attempt to
repair the appliance.
• All adjustments and servicing must be
performed by qualified installers or
service technicians.
• Do not leave the packing material
around the home. Sort the various items
of waste and take them to the nearest
specialized waste collection facility.
How to read the user manual
This user manual uses the following reading
conventions:
1. Order of use instructions.
• Stand-alone instruction.
SAVE THESE INSTRUCTIONS
CAUTION: This unit is designed as
a cooking appliance. For safety
purposes, never use it for warming
the room or as a space heater.
Installation
Information for the qualified
technician: installation, operation
and inspection.
Safety instructions
Information
Advice

Produktspecifikationer

Varumärke: Smeg
Kategori: Ugn
Modell: SFU4104VCS

Behöver du hjälp?

Om du behöver hjälp med Smeg SFU4104VCS ställ en fråga nedan och andra användare kommer att svara dig




Ugn Smeg Manualer

Ugn Manualer

Nyaste Ugn Manualer