Smeg SOPU3302TPX Bruksanvisning

Smeg Ugn SOPU3302TPX

Läs nedan 📖 manual på svenska för Smeg SOPU3302TPX (16 sidor) i kategorin Ugn. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/16

Table of Contents

1 Installation 6

1.1 General installation instructions 6

1.2 Electrical requirements 7

1.3 Electrical connection 8

1.4 Positioning 11

Important Safety Instructions

WARNING: If the instructions contained in this manual are

not followed precisely, fire or explosion may result causing property

damage, personal injury or death.

NOTE: This appliance must be installed solely and exclusively by a qualified

technician. Any technical procedures must be carried out by an authorized

technician.

READ AND SAVE THESE INSTRUCTIONS - Your safety and the safety of

others are very important.

We have provided many important safety messages throughout this manual and

on the appliance.

Read all the instructions before using the appliance and always obey all safety

messages.

RECOGNIZE SAFETY INFORMATION

This is a safety alert symbol. This symbol alerts you to potential hazards that can

result in severe personal injury or death.

UNDERSTAND SIGNAL WORDS

A signal word - DANGER, WARNING or CAUTION - is used with the safety alert

symbol. DANGER denotes the most serious hazards. It means you could be killed

or seriously injured if you do not immediately follow the instructions. WARNING

means you could be killed or seriously injured if the instructions are not followed.

CAUTION indicates a potentially hazardous situation which, if not avoided, could

result in minor to moderate injury.

Important Safety Instructions

The safety messages will inform you of potential hazards, how to avoid the risk of injury and

what can occur if the instructions are not followed.

IMPORTANT: Installation and grounding must conform to applicable

codes. Observe all codes and ordinances in force.

Do not store or use gasoline or other flammable vapors, liquids or materials near this or any

other appliance.

• Read all instructions

• Proper installation is your responsibility. Have a qualified technician install and ground

this appliance in accordance with these installation instructions.

WARNING

• This appliance is intended for home use only.

• Use this appliance only for its intended purpose.

The manufacturer cannot be held liable for damage

caused by improper use of this appliance.

• This appliance complies with current safety

regulations. Improper use of this appliance can

result in personal injury and material damage.

• Read all the instructions before installing or using

the appliance for the first time.

• Keep these operating instructions in a safe place

and pass them on to any future user.

WARNING: For your safety, the instructions contained in this

manual must be followed to minimize the risk of fire or explosion and to

prevent property damage, personal injury or death.

NOTE: This appliance is NOT designed for installation in manufactured (mobile)

homes or in recreational vehicles (RVs).

DO NOT install this appliance outdoors.

WARNING

To reduce the risk of fire, electrical shock,

personal injury or damage when using the

appliance, follow basic safety precautions,

including the following:

Important Safety Instructions

• It is the responsibility of the installer to

comply with installation information

specified on the model/serial ID plate.

The ID Plates are visibly located on the

back of the appliance and on the oven

door frame. These ID plates must never

be removed.

• ELECTRICAL GROUNDING

REQUIRED: See the “Electrical

Requirements” section. It is the

customer’s responsibility to:

• Contact a qualified electrician to install

the appliance

• Ensure that the electrical system is

adequate and conforms with the

national ANSI / NFPA 70 ELECTRICAL

CODE – latest edition – or the

CANADIAN ELECTRICAL CODE,

C22.11 – 1 and C22.2 No. 01982 –

or latest edition – and all local codes

and ordinances. IMPORTANT: Observe

all governing codes and ordinances.

• Make sure that all the appliance controls

are in the OFF position before plugging

the electrical cord into an outlet.

• Never modify or alter the construction of

the appliance. Never remove any part

of the appliance.

• Do not obstruct oven vents or openings

for heat exhaust.

• Test the appliance immediately after

installation, following the instructions in

this booklet. If the appliance does not

work properly, disconnect it from the

electrical power supply and call the

service center. DO NOT attempt to

repair the appliance.

• All adjustments and servicing must be

performed by qualified installers or

service technicians.

• Do not leave the packing material

around the home. Sort the various items

of waste and take them to the nearest

specialized waste collection facility.

How to read the user manual

This user manual uses the following reading

conventions:

1. Use instruction sequence.

• Single use instruction.

SAVE THESE INSTRUCTIONS

CAUTION: This unit is

designed as a cooking appliance.

For safety purposes, never use it for

warming the room or as a space

heater.

Installation

Information for the qualified

technician: installation, operation

and inspection.

Safety instructions

Information

Advice

Produktspecifikationer

Varumärke:	Smeg
Kategori:	Ugn
Modell:	SOPU3302TPX
Färg på produkten:	Zilver
Lägsta drifttemperatur:	0 °C
Maximal temperatur (drift):	70 °C
Ursprungsland:	China
Certifiering:	CE, FCC, REACH
Hållbarhetscertifikat:	RoHS
Varumärkeskompatibilitet:	MSA Compliant
Våglängd:	1310 nm
Medeltid mellan fel (MTBF):	1000000 uur
Typ av anslutning:	QSFP28
Maximal dataöverföringshastighet:	103125 Mbit/s
Maximal-räckvidd:	500 m
Strömförbrukning (typiskt):	3.5 W
Drifttemperatur (TT):	0 - 70 °C
SFP transceiver typ:	Vezel-optiek
Single-mode fiberoptisk kabel (SMF) stöds:	Ja
Multi-mode fiberoptisk kabel (MMF) stöds:	Nee
Fiberoptisk kontakt:	LC
SFP-sändare standard:	PSM4
Duplexsystem:	Volledig
Kabelteknik för fiber-ethernet:	100GBASE
Digital Diagnostics Monitoring (DDM):	Ja
Tx-effekt (min):	-9.4 dBmW
Tx-effekt (max):	2 dBmW