Smeg STX3CL Bruksanvisning

Smeg Diskmaskin STX3CL

Läs nedan 📖 manual på svenska för Smeg STX3CL (16 sidor) i kategorin Diskmaskin. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/16
Contents
1
1. Description of the controls _______________________________ 2
2. Operating instructions __________________________________ 16
3. Cleaning and maintenance ______________________________ 31
4. Troubleshooting ______________________________________ 35
Thank you for choosing one of our products.
You are advised to read this manual carefully; it contains all the
information you need use your dishwasher safely, correctly and in the
most satisfactory manner.
Following the cleaning instructions provided here will keep your
dishwasher's performance at peak levels in the long term.
USER INSTRUCTIONS: these consist of recommendations for using the
appliance, a description of its controls and of the correct cleaning and
maintenance procedures.
User instructions
3
6 PROGRAM DELAY BUTTON
Press this button to delay the start of the program.
7 INFORMATION DISPLAY (1 or 3 digits depending on model)
8 OPTIONS (on some models only)
9 CHILD SAFETY DEVICE (on some models only)
Information displayed
no Scheduled program
duration
yes
no Remaining program
time
yes
1 - 9 hours Delayed start 1 - 24 hours
Error message
Err
<<OPTIONS(8)>>
Depending on the model, this zone may contain one or more of the
following options, identied by the relative symbols and described in more
detail in the relevant sections of the manual.
It is not possible to select any options when the soak program is being
used. All options except "Flexi Tabs" are disabled at the end of the wash
cycle. To disable the “Flexi Tabs” option, press the relative button (the
light goes out).
User instructions
10
NOTES AND REFERENCES
Only
run the soak program with half loads.
Options cannot be used with the soak program.
The ENERSAVE option cannot be used with soak, ultra clean, or any programs
which do not include the nal drying stage.
* Standard programme under
EN 50242
. The
ENERSAVE
option must
be
enabled.
** See information sheet provided
***
IEC/DIN
reference programme. The
ENERSAVE
option must
be enabled
.
**** Reference program for laboratories: Detergent:
20g
in the
dispenser
+
10g
in
the door or tablet. Configuration: see photo in “Using the baskets”.
(1) Program consumption and duration gures have been measured in accordance
with the EN 50242 standard. Values may vary depending on intake water and
room temperatures and the type and quantity of dishes loaded.
(2) 1 or 2 cold rinses depending on the model.
REFERENCES for the ENERGY LABEL supplied with the dishwasher:
- Annual energy consumption is based on 280 standard wash cycles with cold
water and consumption of low-energy operating modes. Actual consumption
depends on the way in which the appliance is used.
- Water consumption is based on 280 standard wash cycles. Actual
consumption depends on the way in which the appliance is used.
- Information refers to the EN 50242 STANDARD programme (identied in the
programmes table), which is the most eective in terms of combined energy
and water consumption. The programme is recommended for dishes with a
normal level of dirt.
- Drying eciency class on a scale from “G” (minimum efciency) to “A
(maximum efciency).

Produktspecifikationer

Varumärke: Smeg
Kategori: Diskmaskin
Modell: STX3CL

Behöver du hjälp?

Om du behöver hjälp med Smeg STX3CL ställ en fråga nedan och andra användare kommer att svara dig




Diskmaskin Smeg Manualer

Diskmaskin Manualer

Nyaste Diskmaskin Manualer