Sony LMD-9050 Bruksanvisning

Sony Övervaka LMD-9050

Läs nedan 📖 manual på svenska för Sony LMD-9050 (38 sidor) i kategorin Övervaka. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/38
3-875-074-12 (1)
LCD Monitor
© 2005 Sony Corporation
LMD-9050
LMD-9030
LMD-9020
Operating Instructions
2
Owner’s Record
The model and serial numbers are located at the rear.
Record these numbers in the spaces provided below.
Refer to these numbers whenever you call upon your
Sony dealer regarding this product.
Model No. ____________________
Serial No. ____________________
This operating instructions manual also applies to
the adaptor.
WARNING
To reduce the risk of fire or electric shock, do
not expose this apparatus to rain or moisture.
Dangerously high voltages are present inside
the unit. Do not open the cabinet. Refer
servicing to qualified personnel only.
In the event of a malfunction or when maintenance is
necessary, consult an authorized Sony dealer.
This unit contains substances which can pollute the
environment if disposed carelessly.
Please contact our nearest representative office or your
local environmental office in case of disposal of this
unit.
WARNING
THIS APPARATUS MUST BE EARTHED.
WARNING
This unit has no primary power switch.
When installing the unit, incorporate a readily
accessible disconnect device in the fixed wiring, or
connect the power cord to socket-outlet which must be
provided near the unit and easily accessible.
If a fault should occur during operation of the unit,
operate the disconnect device to switch the power
supply off, or disconnect the power cord.
For the customers in Europe
This product with the CE marking complies with both
the EMC Directive and the Low Voltage Directive issued
by the Commission of the European Community.
Compliance with these directives implies conformity to
the following European standards:
• EN60950-1 : Product Safety
• EN55103-1 : Electromagnetic Interference
(Emission)
• EN55103-2 : Electromagnetic Susceptibility
(Immunity)
This product is intended for use in the following
Electromagnetic Environments:
E1 (residential), E2 (commercial and light industrial),
E3 (urban outdoors), E4 (controlled EMC environment,
ex. TV studio)
For the customers in Europe
The manufacturer of this product is Sony Corporation,
1-7-1 Konan, Minato-ku, Tokyo, Japan.
The Authorized Representative for EMC and product
safety is Sony Deutschland GmbH, Hedelfinger Strasse
61, 70327 Stuttgart, Germany. For any service or
guarantee matters please refer to the addresses given in
separate service or guarantee documents.
English
This symbol is intended to alert the user to
the presence of uninsulated “dangerous
voltage” within the product’s enclosure that
may be of sufficient magnitude to constitute
a risk of electric shock to persons.
This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
Warning on power connection
Use a proper power cord for your local power supply.
1) Use an appropriate rating plug which is applied to local regulations. (IEC60320-1)
The United States,
Canada
Continental Europe UK, Ireland, Australia,
New Zealand
Plug type VM0233 COX-07/636 _ 1)
Female end VM0089 COX-02/VM0310B VM0303B
Cord type SVT H05VV-F CEE(13)53rd (O, C)
Rated Voltage &
Current
10A/125V 10A/250V 10A/250V
Safety approval UL/CSA VDE VDE
3
CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.
The apparatus shall not be exposed to dripping or
splashing. No objects filled with liquids, such as vases,
shall be placed on the apparatus.
For the Customers in the USA
This equipment has been tested and found to comply
with the limits for a Class A digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference when the equipment is operated in a
commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
communications. Operation of this equipment in a
residential area is likely to cause harmful interference in
which case the user will be required to correct the
interference at his own expense.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
All interface cables used to connect peripherals must be
shielded in order to comply with the limits for a digital
device pursuant to Subpart B of Part 15 of FCC Rules.
For the customers in the USA
Lamp in this product contains mercury. Disposal of
these materials may be regulated due to environmental
considerations. For disposal or recycling information,
please contact your local authorities or the Electronic
Industries Alliance (www.eiae.org).
Attention-when the product is installed in Rack:
1.Prevention against overloading of branch
circuit
When this product is installed in a rack and is supplied
power from an outlet on the rack, please make sure that
the rack does not overload the supply circuit.
2.Providing protective earth
When this product is installed in a rack and is supplied
power from an outlet on the rack, please confirm that the
outlet is provided with a suitable protective earth
connection.
3.Internal air ambient temperature of the rack
When this product is installed in a rack, please make
sure that the internal air ambient temperature of the rack
is within the specified limit of this product.
4.Prevention against achieving hazardous
condition due to uneven mechanical loading
When this product is installed in a rack, please make
sure that the rack does not achieve hazardous condition
due to uneven mechanical loading.
5.Install the equipment while taking the
operating temperature of the equipment into
consideration
Please ensure the amount of air flow required for safe
operation of this product.
For the operating temperature of the equipment, refer to
the specifications of the Operation Manual.

Produktspecifikationer

Varumärke: Sony
Kategori: Övervaka
Modell: LMD-9050

Behöver du hjälp?

Om du behöver hjälp med Sony LMD-9050 ställ en fråga nedan och andra användare kommer att svara dig


Övervaka Sony Manualer

Sony

Sony ZRA-BH15D Bruksanvisning

26 Oktober 2024
Sony

Sony Bravia FW-43BZ35F Bruksanvisning

27 September 2024
Sony

Sony ZRK-CH15D Bruksanvisning

23 September 2024
Sony

Sony LMD-1420 Bruksanvisning

22 September 2024
Sony

Sony FW-75BZ35F Bruksanvisning

22 September 2024
Sony

Sony PVM-2541A Bruksanvisning

22 September 2024
Sony

Sony PVM-740 Bruksanvisning

22 September 2024
Sony

Sony SRM-L560 Bruksanvisning

22 September 2024
Sony

Sony PVM-X300 Bruksanvisning

22 September 2024
Sony

Sony LMD-DM30 Bruksanvisning

22 September 2024

Övervaka Manualer

Nyaste Övervaka Manualer

LC-Power

LC-Power LC-M27-QHD-165-C-K Bruksanvisning

27 Oktober 2024
BenQ

BenQ FP72E Bruksanvisning

27 Oktober 2024
Eizo

Eizo DuraVision FDF2382WT Bruksanvisning

27 Oktober 2024
DataVideo

DataVideo TLM-170KM Bruksanvisning

27 Oktober 2024
Hikvision

Hikvision DS-D4218FI-162H Bruksanvisning

27 Oktober 2024
Planar

Planar LX1201PTI Bruksanvisning

27 Oktober 2024
HP

HP E27k G5 Bruksanvisning

26 Oktober 2024
AOC

AOC Q32G3SE Bruksanvisning

26 Oktober 2024
Viewsonic

Viewsonic VG2720-2K-3 Bruksanvisning

26 Oktober 2024
Viewsonic

Viewsonic ViewBoard 7552-1C Bruksanvisning

26 Oktober 2024