Sony LMD-DM50 Bruksanvisning

Sony Övervaka LMD-DM50

Läs nedan 📖 manual på svenska för Sony LMD-DM50 (34 sidor) i kategorin Övervaka. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/34

LCD Display

4-421-015-12 (1)

Instructions for Use

Before operating the unit, please read this manual thoroughly

and retain it for future reference.

LMD-DM50

LMD-DM30

LMD-DM20

Owner’s Record

The model and serial numbers are located at the rear.

Record these numbers in the spaces provided below.

Refer to these numbers whenever you call upon your

Sony dealer regarding this product.

Model No. ____________________

Serial No. ____________________

WARNING

To reduce the risk of fire or electric shock, do

not expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the

cabinet. Refer servicing to qualified personnel

only.

No modification of this apparatus is allowed.

WARNING

THIS APPARATUS MUST BE EARTHED.

To disconnect the main power, unplug the AC plug.

WARNING

When installing the unit, incorporate a readily

accessible disconnect device in the fixed wiring, or

connect the power plug to an easily accessible socket-

outlet near the unit. If a fault should occur during

operation of the unit, operate the disconnect device to

switch the power supply off, or disconnect the power

plug.

WARNING

Make sure the surface is wide enough so that this

apparatus’s width and depth don’t exceed the surface’s

edges.

If not, this apparatus may lean or fall over and cause an

injury.

For the customers in the U.S.A.

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful

interference in a residential installation. This equipment

generates, uses, and can radiate radio frequency energy

and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio

communications. However, there is no guarantee that

interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio

or television reception, which can be determined by

turning the equipment off and on, the user is encouraged

to try to correct the interference by one or more of the

following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and

receiver.

- Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV

technician for help.

You are cautioned that any changes or modifications not

expressly approved in this manual could void your

authority to operate this equipment.

All interface cables used to connect peripherals must be

shielded in order to comply with the limits for a digital

device pursuant to Subpart B of Part 15 of FCC Rules.

If you have any questions about this product, you may

call;

Sony Customer Information Service Center 1-800-222-

7669 or http://www.sony.com/

WARNING:

Using this unit at a voltage other than 120 V may require

the use of a different line cord or attachment plug, or

both. To reduce the risk of fire or electric shock, refer

servicing to qualified service personnel.

For the customers in Canada

This Class B digital apparatus complies with Canadian

ICES-003.

For the customers in Canada

This unit has been certified according to Standard CSA

C22.2 No.601.1.

For the customers in the U.S.A and Canada

When you use this product connected to 240 V single

phase, be sure to connect this product to a center tapped

circuit.

Declaration of Conformity

Trade Name : SONY

Model : LMD-DM50/DM30/DM20

Responsible party : Sony Electronics Inc.

Address : 16530 Via Esprillo, San Diego,

CA 92127 U.S.A.

Telephone Number : 858-942-2230

This device complies with part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

For the customers in Europe

This product has been manufactured by or on behalf of

Sony Corporation, 1-7-1 Konan Minato-ku Tokyo, 108-

0075 Japan. Inquiries related to product compliance

based on European Union legislation shall be addressed

to the authorized representative, Sony Deutschland

GmbH, Hedelfinger Strasse 61, 70327 Stuttgart,

Germany. For any service or guarantee matters, please

refer to the addresses provided in the separate service or

guarantee documents.

Important safeguards/notices for use in the

medical environments

1. All the equipments connected to this unit shall be

certified according to Standard IEC60601-1,

IEC60950-1, IEC60065 or other IEC/ISO Standards

applicable to the equipments.

2. Furthermore all configurations shall comply with the

system standard IEC60601-1-1. Everybody who

connects additional equipment to the signal input

part or signal output part configures a medical

system, and is therefore, responsible that the system

complies with the requirements of the system

standard IEC60601-1-1.

If in doubt, consult the qualified service personnel.

3. The leakage current could increase when connected

to other equipment.

4. For this particular equipment, all accessory

equipment connected as noted above, must be

connected to mains via an additional isolation

transformer conforming with the construction

requirements of IEC60601-1 and providing at least

Basic Insulation.

5. This equipment generates, uses, and can radiate radio

frequency energy. If it is not installed and used in

accordance with the instruction manual, it may cause

interference to other equipment. If this unit causes

interference (which can be determined by

unplugging the power cord from the unit), try these

measures: Relocate the unit with respect to the

susceptible equipment. Plug this unit and the

susceptible equipment into different branch circuit.

Consult your dealer. (According to standard EN60601-

1-2 and CISPR11, Class B, Group 1)

Caution

When you dispose of the unit or accessories, you must

obey the laws in the relative area or country and the

regulations in the relative hospital.

For the customers in the USA

Lamp in this product contains mercury. Disposal of

these materials may be regulated due to environmental

considerations. For disposal or recycling information,

please contact your local authorities or the

Telecommunications Industry Association

(www.eiae.org).

WARNING on power connection

Use a proper power cord for your local power supply.

1. Use the approved Power Cord (3-core mains lead) /

Appliance Connector / Plug with earthing-contacts

that conforms to the safety regulations of each

country if applicable.

2. Use the Power Cord (3-core mains lead) / Appliance

Connector / Plug conforming to the proper ratings

(Voltage, Ampere).

If you have questions on the use of the above Power

Cord / Appliance Connector / Plug, please consult a

qualified service personnel.

WARNING on power connection for medical

use

Please use the following power supply cord. With

connectors (plug or female) and cord types other than

those indicated in this table, use the power supply cord

that is approved for use in your area.

*Note: Grounding reliability can only be achieved when the

equipment is connected to an equivalent receptacle marked ‘Hospital

Only’ or ‘Hospital Grade’.

Symbols on the unit

This symbol indicates the manufacturer, and

appears next to the manufacturer’s name and

address.

Refer to the operating instructions

Follow the directions in the operating

instructions for parts of the unit on which this

mark appears.

United States and Canada

Plug Type HOSPITAL GRADE*

Cord Type Min. Type SJT

Min. 18 AWG

Minimum Rating

for Plug and

Appliance

Couplers

10A/125V

Safety Approval UL Listed and CSA

Produktspecifikationer

Varumärke:	Sony
Kategori:	Övervaka
Modell:	LMD-DM50

Behöver du hjälp?

Om du behöver hjälp med Sony LMD-DM50 ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Övervaka Sony Manualer

Sony ZRA-BH15D Bruksanvisning

26 Oktober 2024

Sony Bravia FW-43BZ35F Bruksanvisning

27 September 2024

Sony ZRK-CH15D Bruksanvisning

23 September 2024

Sony LMD-1420 Bruksanvisning

22 September 2024

Sony FW-75BZ35F Bruksanvisning

22 September 2024

Sony PVM-2541A Bruksanvisning

22 September 2024

Sony PVM-740 Bruksanvisning

22 September 2024

Sony SRM-L560 Bruksanvisning

22 September 2024

Sony PVM-X300 Bruksanvisning

22 September 2024

Sony LMD-DM30 Bruksanvisning

22 September 2024

Övervaka Manualer

Nyaste Övervaka Manualer

LC-Power LC-M27-QHD-165-C-K Bruksanvisning

27 Oktober 2024

BenQ FP72E Bruksanvisning

27 Oktober 2024

Eizo DuraVision FDF2382WT Bruksanvisning

27 Oktober 2024

DataVideo TLM-170KM Bruksanvisning

27 Oktober 2024

Hikvision DS-D4218FI-162H Bruksanvisning

27 Oktober 2024

Planar LX1201PTI Bruksanvisning

27 Oktober 2024

HP E27k G5 Bruksanvisning

26 Oktober 2024

AOC Q32G3SE Bruksanvisning

26 Oktober 2024

Viewsonic VG2720-2K-3 Bruksanvisning

26 Oktober 2024

Viewsonic ViewBoard 7552-1C Bruksanvisning

26 Oktober 2024