Soundmaster MCD 4500USB Bruksanvisning

Läs nedan 📖 manual på svenska för Soundmaster MCD 4500USB (9 sidor) i kategorin hi-fi system. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/9
This symbol indicates the presence of dangerous
voltage inside the enclosure, sufficient enough to
cause electric shock.
This symbol indicates the presence of important
operating and maintenance instructions for the
device.
Safety, Environmental and Setup Instructions
Use the device in dry indoor environments only.
Protect the device from humidity.
Do not open the device. Refer opening and servicing to qualified personnel. RISK OF ELECTRIC SHOCK!
Connect this device to a properly installed and earthed wall outlet only. Make sure the mains voltage corresponds with
the specifications on the rating plate.
Make sure the mains cable stays dry during operation. Do not pinch or damage the mains cable in any way.
A damaged mains cable or plug must immediately be replaced by an authorized service center.
In case of lightning, immediately disconnect the device from the mains supply.
Children should be supervised by parents when using the device.
Clean the device with a dry cloth only.
Do NOT use CLEANING AGENTS or ABRASIVE CLOTHS!
Do not expose the device to direct sunlight or other heat sources.
Install the device at a location with sufficient ventilation in order to prevent heat accumulation.
Do not cover the ventilation openings!
Install the device at a safe and vibration-free location.
Install the device as far away as possible from computers and microwave units; otherwise radio reception may be
disturbed.
Do not open or repair the enclosure. It is not safe to do so and will void your warranty. Repairs only by authorized
service/ customer center.
The device is equipped with a “Class 1 Laser”. Avoid exposure to the laser beam as this could cause eye injuries.
Only use mercury and cadmium-free batteries.
Used batteries are hazardous waste and NOT to be disposed of with the household waste!!! Return the batteries to your
dealer or to collection points in your community.
Keep batteries away from children. Children might swallow batteries. Contact a physician immediately if a battery was
swallowed.
Check your batteries regularly to avoid battery leakage.
CLASS 1 LASER PRODUCT
KLASSE 1 LASER PRODUKT
LUOKAN 1 LASER LAITE
KLASS 1 LASER APPARAT
PRODUCTO LASER CLASE 1
CAUTION - INVISIBLE LASER RADIATION WHEN OPENING
THE COVER OR PRESSING THE SAFETY INTERLOCK. AVOID
EXPOSURE TO THE LASER BEAM.
ENVIRONMENTAL PROTECTION
Do not dispose of this product with the normal household waste at the end
of its life cycle. Return it to a collection point for the recycling of electrical
and electronic devices. This is indicated by the symbol on the product,
user manual or packaging.
The materials are reusable according to their markings. By reusing, recycling or
other forms of utilization of old devices you make an important contribution to
the protection of our environment.
Please contact your local authorities for details about collection points.
WARNING
Risk of electric shock
Do not o
p
en!
Caution: To reduce the risk of electric shock, do not remove the cover (or back). There
are no user serviceable parts inside. Refer servicing to qualified service personnel.
Used batteries are hazardous waste and NOT to be disposed
of with the household waste! As a consumer you are legally
obligated to return all batteries for environmentally responsible
recycling – no matter whether or not the batteries contain harmful
substances*).
Return batteries free of charge to public collection points in your
community or to shops selling batteries of the respective kind.
Only return fully discharged batteries.
*) marked Cd = cadmium, Hg = mercury, Pb = lead
LOCATION OF CONTROLS
1) DUST COVER
2) LCD DISPLAY
3) RECORD BUTTON
4) SOURCE BUTTON
5) POWER LED INDICATOR
6) FUNCTION SELECTOR
7) 3.5MM HEADPHONE JACK
8) USB SOCKET
9) CASSETTE DECK (1) DOOR
10) BAND/FM STEREO SELECTOR
11) SD/MMC CARD SLOT
12) MP3 FOLDER UP BUTTON
13) SKIP DOWN BUTTON
14) DECK 1 CONTROL KEY
RECORD KEY
PLAYBACK KEY
REWIND KEY
FAST FORWARD KEY
STO/EJECT KEY
PAUSE KEY
15) CD DOOR
16) PLAY/PAUSE/STOP BUTTON
17) X-BASS ON/OFF BUTTON
18) REMOTE SENSOR
19) POWER ON/OFF / VOLUME UP/DOWN KNOB
20) TUNING KNOB
21) FM STEREO LED INDICATOR
22) CASSETTE DECK (2) DOOR
23) HI-SPEED DUBBING BUTTON
24) SKIP UP BUTTON
25) LED DIAL POINTER
26) DECK (2) CONTROL KEYS
27) CD DORR OPEN BUTTON
28) SPINDLE ADAPTOR
29) 33/45/78 RPM SPEED SELECTOR
30) PICK-UP HOLDER
31) FM ANTENNA
32) LINE OUT SOCKET
33) SPEAKER TERMINAL
34) AUTO STOP ON/OFF SWITCH
35) AC LINE CORD
CAUTION:
USAGE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULTE IN HAZARDOUS RADIATION EXPOSURE.
THIS UNIT SHOULD NOT BE ADJUSTED OR REPAIRED BY ANYONE EXCEPT QUALIFIED SERVICE
PERSONNEL.
PRECAUTIONS FOR USE
INSTALLATION
UNPACK ALL PARTS AND REMOVE PROTECTIVE MATERIAL.
DO NOT CONNECT THE UNIT TO THE MAINS BEFORE CHECKING THE MAINS VOLTAGE AND BEFORE
ALL OTHER CONNECTIONS HAVE BEEN MADE.
DO NOT COVER ANY VENTS AND MAKE SURE THAT THERE IS A SPACE OF SEVERAL CENTIMETERS
AROUND THE UNIT FOR VENTILATION.
TOP COVER ASSEMBLY
1. PUSH THE METAL BRACKET TO REAR SIDE.
2. CONNECT THE METAL BRACKET TO THE TOP COVER
3. CONNECT THE HINGE OF THE TOP COVER TO THE MAIN UNIT
E-1
CONNECTION
1. CONNECT THE POWER CORD (35) TO AC OUTLET AND CONNECT THE SPEAKER JACK TO THE
SPEAKER TERMINAL (33) LOCATED ON THE REAR SIDE OF UNIT.
2. SWITCH THE FUNCTION SELECTOR (6) TO “ TUNER “ FUNCTION. IF THE POWER LCD DISPLAY (2) LIGHT
UP WITH BLUE BACKLIGHT, IT’S MEAN THE POWER SUPPLY IS NORMAL. NOW YOUR SYSTEM IS
READY TO PLAY THE MUSIC.
LISTENING TO RADIO
MANUAL TUNING
1. TURN ON THE POWER BY TUNING THE “ POWER ON/OFF ” BUTTON (19) UNTIL HEAR A KLICK SOUND.
2. SELECT ” FUCNTION “ SELECTOR (6) TO “ TUNER “ POSITION AND THEN SELECT DESIRE BAND (AM OR
FM OR FM-STEREO) AT “ BAND/FM-ST “ SELECTOR (10).
3. TUNE TO THE DESIRE STATION BY TURNING THE TUNING KNOB (18).
4. ADJUST THE VOLUME KNOB (19) TO THE DESIRE VOLUME LEVEL.
FM & FM-STEREO RECEPTION
SET THE BAND/FM-ST SELECTOR (10) AT FM POSITION. PROGRAMS ARE RECEIVED IN MONO
MODE. IN PARTICULAR WHEN STEREO SIGNALS ARE WEAK. IT IS PREFERABLE TO RECEIVE THE
PROGRAM IN MONO.
SET THE BAND/FM-ST SELECTOR (10) AT “FM-ST” POSITION FOR RECEIVING STEREO PROGRAMS.
THE LED “FM-ST” INDICATOR WILL LIGHT UP TO SHOW FM STEREO PROGRAM IS RECEIVING.
HINTS FOR BEST RECEPTION:-
- AM : THE RECEIVER HAS A BUILT-IN AM BAR ANTENNA. IF AM RECECPTION IS WEAK, SLIGHTLY
ROTATE OR RE-POSITIONING OF THE UNIT WILL USUALLY IMPROVE THE AM RECEPTION.
- FM : THE RECEIVER HAS A BUILD-IN FM WIRE ANTENNA (31) HANGING AT THE REAR CABINET. THIS
WIRE SHOULD BE TOTALLY UNRAVELED AND EXTENDED FOR BEST RECEPTION.
PLAYING COMPACT DISC
GETTING START
1. TURN FUNCTION SELECTOR (6) TO SELECT “ CD/USB/SD ” MODE.
2. PRESS “OPEN/CLOSE” BUTTON (27) TO OPEN THE CD DOOR (15).
3. PLACE A CD WITH THE PRINTED SIDE FACING UP INSIDE THE TRAY & THEN CLOSE THE CO DOOR.
4. FOCUS SEARCH IS PERFORMING, THE LCD DISPLAY (2) WILL SHOW THE TOTAL NUMBER OF TRACKS
& TOTAL PLAYING TIME.
PLAY / PAUSE / STOP MODE
1. PRESS THE PLAY/PAUSE/STOP BUTTON (16) TO START PLAYBACK, THE FIRST TRACK WILL START
PLAYBACK.
2. TO INTERRUPT, PRESS THE PLAY/PAUSE/STOP BUTTON (16) ONCE, THE PLAYING TIME WILL BE
FREEZE & FLASHING ON THE LCD DISPLAY (2). PRESS AGAIN TO RESUME NORMAL PLAYBACK.
3. IF PRESS AND HOLD THE PLAY / PAUSE STOP BUTTON (16) FOR OVER 2 SECONDS DURIGN
PLAYBACK MODE. THE SYSTEM WILL GO TO STOP MODE.
SKIP/SEARCH MODE (SKIP/SEARCH UP / SKIP/SEARCH DOWN )
1. DURING PLAY OR PAUSE MODE, IF “SKIP UP” BUTTON (24) IS PRESSED. IT WILL GO TO NEXT TRACK
AND DISPLAY THE TRACK NO. AND THEN REMAIN THE PLAY OR PAUSE MODE.
2. DURING PLAY OR PAUSE MODE, IF “SKIP DOWN” BUTTON (13) IS PRESSED. IT WILL GO BACK TO THE
BEGINNING OF THE TRACK, ORIGINAL TRACK NO. IS DISPLAY AND REMAIN THE PLAY OR PAUSE
MODE.
3. AFTER STEP 2, PRESS “SKIP DOWN” BUTTON (13) AGAIN WILL GO TO THE PREVIOUS TRACK AND
REMAIN THE PLAY OR PAUSE MODE.
4. IF PRESS AND HOLD THE SKIP UP/DOWN BUTTON (24,13) DURING CD/MP3 PLAYABCK, THE
PLAYING TRACK WILL GO FAST FORWARD OR BACKWARD UNTIL THE BUTTON BEING RELEASED.
FOR MP3/WMA DISC
1. PRESS “ FOLDER UP “ BUTTON (12), THE FOLDER NO. WILL GOES UP
2. PRESS “ SKIP UP “ OR SKIP DOWN (24,13) BUTTON, THE TRACK NO. CHANGE.
3. WHEN THE DESIRED TRACK IS BEING SELECTED, PRESS THE CD PLAY/PAUSE/STOP BUTTON (16)
TO START PLAYBACK.
ID3 (TRACK/ALBUM TITLE) FUNCTION (BY REMOTE HANDSET)
1. PRESS THE INFO BUTTON DURING PLAYBACK OF MP3/WMA DISC, THE SONG TITLE IS BEING
DISPLAYED. PRESS THE “ INFO ” BUTTON AGAIN TO DISABLE THE FUNCTION.
E-2

Produktspecifikationer

Varumärke: Soundmaster
Kategori: hi-fi system
Modell: MCD 4500USB

Behöver du hjälp?

Om du behöver hjälp med Soundmaster MCD 4500USB ställ en fråga nedan och andra användare kommer att svara dig




hi-fi system Soundmaster Manualer

hi-fi system Manualer

Nyaste hi-fi system Manualer