Speco Technologies VLD1A Bruksanvisning

Läs nedan 📖 manual på svenska för Speco Technologies VLD1A (10 sidor) i kategorin övervakningskamera. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/10
User Manual
All- - One CameraIn
VLD1A
Version 0.11.
i
Table of Contents
1 General Introducon .................................................................1
1.1 Features ...........................................................................1
2 Device Framework .....................................................................2
3 Installaon .................................................................................3
ii
Welcome
Thank you for purchasing our All in One camera!
This user’s manual is designed to be a reference tool for your system.
Please read the following safeguard and warnings carefully before you use this
product!
Please keep this user manual for future reference!
Important Safeguards and Warnings
1 Electrical safety
All installaon and operaon here should conform to your local electrical safety
codes.
Please check if the power supply is correct before operang the device.
The power shall conform to the requirement in the SELV (Safety Extra Low Voltage)
and the Limited power source is rated DC 12V or AC24V in the IEC60950-1. (Power
supply requirement is subject to the device label).
Please install easy- -use device for power o before installing wiring, which is for to
emergent power o when necessary.
Please prevent the line cord from being trampled or pressed, especially the plug,
power socket and the juncon from the device.
Note: Do not connect these two power supplying sources to the device at the
same me; it may result in device damage!
We assume no liability or responsibility for all the res or electrical shock caused by
improper handling or installation.
We are not liable for any problems caused by unauthorized modicaon or
aempted repair.
2 Environment
Please don’t aim the device at strong light (such as lighng, sunlight and so on) to
focus; otherwise it may cause overexposure (It is not the device malfuncon), which
will aect the longevity of CCD or CMOS.
Please transport, use and store the device within the range of allowed humidity and
temperature.
Please don’t keep the device in a place which is wet, dusty, extremely hot, and
extremely cold and with strong electromagnec radiation or unstable lighng.

Produktspecifikationer

Varumärke: Speco Technologies
Kategori: övervakningskamera
Modell: VLD1A

Behöver du hjälp?

Om du behöver hjälp med Speco Technologies VLD1A ställ en fråga nedan och andra användare kommer att svara dig




övervakningskamera Speco Technologies Manualer

övervakningskamera Manualer

Nyaste övervakningskamera Manualer