StarTech.com DisplayPort Bruksanvisning

StarTech.com Kablar för PC och kringutrustning DisplayPort

Läs nedan 📖 manual på svenska för StarTech.com DisplayPort (1 sidor) i kategorin Kablar för PC och kringutrustning. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

Warranty Information

This product is backed by a one year warranty.

In addition, StarTech.com warrants its products against defects in materials

and workmanship for the periods noted, following the initial date of purchase. During this period, the products may be returned for repair, or replacement with

equivalent products at our discretion. The warranty covers parts and labor costs only. StarTech.com does not warrant its products from defects or damages arising

from misuse, abuse, alteration, or normal wear and tear.

Limitation of Liability

In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ofﬁcers, directors, employees or agents) for any damages (whether direct

or indirect, special, punitive, incidental, consequential, or otherwise), loss of proﬁts, loss of business, or any pecuniary loss, arising out of or related to the use of

the product exceed the actual price paid for the product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws

apply, the limitations or exclusions contained in this statement may not apply to you.

• 1 x DisplayPort to HDMI adapter

• Multi-mode DisplayPort (DP++) enabled computer

system with available DisplayPort port

• USB enabled computer system with available port

• HDMI enabled display device

1. Make sure the computer system and display device are

turned off.

2. Connect the DisplayPort connector into the host

computer system’s video card.

3. Connect the USB connector on the adapter into an

available USB port on the host computer system.

4. Connect a standard male/male HDMI cable (not

included) from the adapter to an available HDMI

connector on the display device.

5. Power on the display device.

6. Power on the computer system. The Power LED on the

adapter should light up.

7. The computer system should automatically detect

the display device. Driver installation or special setup

requirements depend on the connected display device.

Consult any documentation included with your display

device.

8. The operating system should also automatically detect

and install a new audio output device.

9. If you wish to send audio over HDMI, check the audio

properties for the operating system, to make sure the

USB adapter is set as the default audio device.

NOTE: This will disable audio output from any

speakers/headphones currently connected to the

computer system.

10. If you do not wish to use audio over HDMI, set the

default audio device back to the original audio output

device (e.g. sound card) for your system.

Bus Interface DisplayPort 1.1a

USB 2.0

Video Signal High Speed HDMI (1.3b)

Connectors

1 x DisplayPort male

1 x HDMI female

1 x USB type A male

LEDs 1 x Power

Integrated Cable Length 61cm / 2ft

Maximum Video Resolution 1920x1200 / 1080p

Audio Support Yes - 2 channel LPCM

HDCP Support Yes

Operating Temperature 0°C ~ 70°C (32°F ~ 158°F)

Storage Temperature -10°C ~ 80°C (14°F ~ 176°F)

Humidity 10% ~ 85% RH

Dimensions 80mm x 56mm x 12mm

Weight 103g

Manual Revision:11/18/2010

For the most up-to-date information, please visit www.startech.com

Produktspecifikationer

Varumärke:	StarTech.com
Kategori:	Kablar för PC och kringutrustning
Modell:	DisplayPort
Bredd:	93.2 mm
Djup:	94 mm
Höjd:	295.3 mm
Förpackningens vikt:	1510 g
Förpackningens bredd:	371 mm
Djuppackning:	125 mm
Förpackningshöjd:	178 mm
Material:	Aluminium
Kylvätskekapacitet:	0.4 l