StarTech.com IPUSB2VGA2 Bruksanvisning

StarTech.com AV extender IPUSB2VGA2

Läs nedan 📖 manual på svenska för StarTech.com IPUSB2VGA2 (11 sidor) i kategorin AV extender. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/11

Manual Revision: 02/24/2021

For the most up-to-date information, please visit: www.startech.com

DE: Bedienungsanleitung - de.startech.com

FR: Guide de l'utilisateur - fr.startech.com

ES: Guía del usuario - es.startech.com

IT: Guida per l'uso - it.startech.com

NL: Gebruiksaanwijzing - nl.startech.com

PT: Guia do usuário - pt.startech.com

IPUSB2VGA2

VGA over IP Extender - 1920 x 1200

*actual product may vary from photos

User Manual

FCC Compliance Statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant

to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful

interference in a residential installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception, which

can be determined by turning the equipment o and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Industry Canada Statement

This Class A digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe [A] est conforme à la norme NMB-003 du Canada.

CAN ICES-3 (A)/NMB-3(A)

This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the

following two conditions:

(1) This device may not cause interference, and (2) This device must accept any interference, including

interference that may cause undesired operation of the device.

Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de

licence.

L’exploitation est autorisée aux deux conditions suivantes:

(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage

radioélectrique subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.

Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols

This manual may make reference to trademarks, registered trademarks, and other protected names and/

or symbols of third-party companies not related in any way to StarTech.com. Where they occur these

references are for illustrative purposes only and do not represent an endorsement of a product or service

by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party

company in question. Regardless of any direct acknowledgement elsewhere in the body of this document,

StarTech.com hereby acknowledges that all trademarks, registered trademarks, service marks, and other

protected names and/or symbols contained in this manual and related documents are the property of their

respective holders.

User Manual i

Table of Contents

Overview ....................................................................................................... 1

About this product 1 .........................................................................................................................................

Packaging contents 1 ........................................................................................................................................

System requirements.....................................................................................................................................1

Front view 2 ..........................................................................................................................................................

Rear view 2 ............................................................................................................................................................

Software Installation ................................................................................... 3

Software Installation for Windows Computers 3 ....................................................................................

Software Installation for Mac Computers 3 ..............................................................................................

Hardware Installation .................................................................................. 3

Hardware Installation for USB Mode 3 ........................................................................................................

Hardware Installation for Ethernet Mode 4 ..............................................................................................

Conguration ................................................................................................ 4

Conguration for Windows Computers 4 ..................................................................................................

USB Mode 4 .....................................................................................................................................................

Ethernet Mode 4 ............................................................................................................................................

Conguration for Mac Computers 5 ............................................................................................................

USB Mode 5 .....................................................................................................................................................

Ethernet Mode 6 ............................................................................................................................................

Change your Computer’s IP Address 6 .......................................................................................................

Change the VGA Adapter’s IP Address 6 ....................................................................................................

USB Server Conguration (Windows only) 7 ............................................................................................

Automatic Device Connection 7 ...................................................................................................................