StarTech.com LTSTND Bruksanvisning
StarTech.com
Platt panelstöd
LTSTND
Läs nedan 📖 manual på svenska för StarTech.com LTSTND (2 sidor) i kategorin Platt panelstöd. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: July 4, 2019
Product Diagram (LTSTND)
Angled View
Part Function
1Top Plate • A platform for a Laptop
2Upper Leg
• Attaches to the Top Plate
• Congurable with three height-adjustment
settings
3Cable-Management
Slots • Organize and route Cables
4Lower Leg • Attaches to the Upper Leg
5Height-Adjustment
Knob
• Secure the and Upper Legs Lower Legs
together
• Can be removed to adjust height settings
Laptop Stand - Height Adjustable
Requirements
• Clean, Flat, and Stable Surface x 1
For the latest requirements please visit: .
www.startech.com/LTSTND
Installation
Assembly
1. Place the , top side down, onto a .Top Plate Clean, Flat, and Stable Surface
Note: The lip on the can overhang o the edge of the for a level Top Plate Surface
installation.
2. Place the onto the . Ensure the in the Upper Legs Top Plate Holes Upper Legs
are aligned with the on the . The slanted portion of the Threaded Posts Top Plate
Upper Legs Top Plate should be aligned with the slanted portion of the .
3. Secure the to the using two for each side. Fasten the Upper Legs Top Plate, Nuts
Nuts Wrench using the . (Figure 1)
Note: Align the outside edges of the with the outside edges of the Upper Legs Top
Plate Nuts before tightening the .
1
4
2
5
3
Figure 1
Wrench
Nut
Upper Leg
Top Plate
Threaded
Post
Use of Trademarks, Registered Trademarks, and other Protected Names and Symbols
This manual may make reference to trademarks, registered trademarks, and other protected names and/or symbols of third-
party companies not related in any way to StarTech.com. Where they occur these references are for illustrative purposes
only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to
which this manual applies by the third-party company in question. StarTech.com hereby acknowledges that all trademarks,
registered trademarks, service marks, and other protected names and/or symbols contained in this manual and related
documents are the property of their respective holders.
Warranty Information
This product is backed by a ve-year warranty.
For further information on product warranty terms and conditions, please refer to .
www.startech.com/warranty
FR: fr.startech.com
DE: de.startech.com
ES: es.startech.com
NL: nl.startech.com
IT: it.startech.com
JP: jp.startech.com
StarTech.com Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
2500 Creekside
Parkwy
Lockbourne, Ohio
43137
U.S.A.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss of
business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the limitations
or exclusions contained in this statement may not apply to you.
4. Align the on the with the on the Screw Holes Lower Legs Screw Holes Upper Legs
at the desired height adjustment setting.
5. Insert the through the on the Height-Adjustment Knobs Screw Holes Upper
Legs Screw Holes Lower Legs Height-and into the on the , then hand-tighten the
Adjustment Knob, being careful not to over-tighten.
6. Turn the upright. Laptop Stand Assembly
7. (Optional) Route the through the .Laptop Cables Cable-Management Slots
Operation
Height Adjustment
1. Disconnect the , remove them from the , Laptop Cables Cable-Management Slots
and remove the .Laptop
2. Place the , top side down, on a Laptop Stand Assembly Clean, Flat, and Stable
Surface.
Note: The lip on the can overhang o the edge of the for a level Top Plate Surface
adjustment.
3. Remove the by turning each counterclockwise.Height-Adjustment Knobs Knob
Note: Ensure the are supported while removing the Upper Legs Height Adjustment
Knobs.
4. Align the on the with the on the Screw Holes Lower Legs Screw Holes Upper Legs
at the desired height adjustment setting.
5. Insert the through the on the Height-Adjustment Knobs Screw Holes Upper
Legs Screw Holes Lower Legs Height-and into the on the , then hand-tighten the
Adjustment Knob, being careful not to over-tighten.
6. Turn the upright. Laptop Stand Assembly
Figure 2
Height-Adjustment Knob
Lower Leg
Top Plate
Upper Leg
Produktspecifikationer
Varumärke: | StarTech.com |
Kategori: | Platt panelstöd |
Modell: | LTSTND |
Behöver du hjälp?
Om du behöver hjälp med StarTech.com LTSTND ställ en fråga nedan och andra användare kommer att svara dig
Platt panelstöd StarTech.com Manualer
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
15 Januari 2025
Platt panelstöd Manualer
- Platt panelstöd Samsung
- Platt panelstöd HP
- Platt panelstöd Pioneer
- Platt panelstöd Abus
- Platt panelstöd Acco
- Platt panelstöd Akai
- Platt panelstöd Icy Box
- Platt panelstöd Hitachi
- Platt panelstöd Gembird
- Platt panelstöd SilverStone
- Platt panelstöd LC-Power
- Platt panelstöd GPX
- Platt panelstöd Blaupunkt
- Platt panelstöd Manhattan
- Platt panelstöd Tripp Lite
- Platt panelstöd Vision
- Platt panelstöd Kensington
- Platt panelstöd Nabo
- Platt panelstöd Nec
- Platt panelstöd Techly
- Platt panelstöd BlueBuilt
- Platt panelstöd Da-Lite
- Platt panelstöd Luxor
- Platt panelstöd Steren
- Platt panelstöd Iiyama
- Platt panelstöd Barkan
- Platt panelstöd Digitus
- Platt panelstöd Insignia
- Platt panelstöd Sanus
- Platt panelstöd Peerless-AV
- Platt panelstöd Vogels
- Platt panelstöd Fellowes
- Platt panelstöd Dell
- Platt panelstöd Planar
- Platt panelstöd Sven
- Platt panelstöd Konig
- Platt panelstöd One For All
- Platt panelstöd Ematic
- Platt panelstöd Newstar
- Platt panelstöd Ewent
- Platt panelstöd HQ
- Platt panelstöd BakkerElkhuizen
- Platt panelstöd Ultimate
- Platt panelstöd Wentronic
- Platt panelstöd Peerless
- Platt panelstöd Proaim
- Platt panelstöd Monoprice
- Platt panelstöd Chief
- Platt panelstöd Ergotron
- Platt panelstöd Gabor
- Platt panelstöd Konig & Meyer
- Platt panelstöd Premier
- Platt panelstöd Atdec
- Platt panelstöd SIIG
- Platt panelstöd Bell'O
- Platt panelstöd B-tech
- Platt panelstöd Speaka
- Platt panelstöd Crimson
- Platt panelstöd Kogan
- Platt panelstöd Panduit
- Platt panelstöd Schwaiger
- Platt panelstöd Premier Mounts
- Platt panelstöd Cabstone
- Platt panelstöd Elite Screens
- Platt panelstöd Kanto
- Platt panelstöd V7
- Platt panelstöd Kondator
- Platt panelstöd Bretford
- Platt panelstöd SmartMetals
- Platt panelstöd Unicol
- Platt panelstöd Anthro
- Platt panelstöd Alogic
- Platt panelstöd Equip
- Platt panelstöd Zaor
- Platt panelstöd Dataflex
- Platt panelstöd Multibrackets
- Platt panelstöd AMX
- Platt panelstöd Rocstor
- Platt panelstöd CTA Digital
- Platt panelstöd Amer
- Platt panelstöd SunBriteTV
- Platt panelstöd Avteq
- Platt panelstöd Walker Edison
- Platt panelstöd My Wall
- Platt panelstöd Mount-It!
- Platt panelstöd LTN Technologies
- Platt panelstöd Heckler
- Platt panelstöd Helder
- Platt panelstöd NeoMounts
Nyaste Platt panelstöd Manualer
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025
16 Januari 2025