StarTech.com M2-HDD-DUPLICATOR-N1 Bruksanvisning

StarTech.com Inte kategoriserad M2-HDD-DUPLICATOR-N1

Läs nedan 📖 manual på svenska för StarTech.com M2-HDD-DUPLICATOR-N1 (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 5 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/2
Quick-Start Guide
To view manuals, FAQs, videos, drivers, downloads, technical drawings, and more, visit www.startech.com/support.
Manual Revision: March 14, 2024
Product ID
M2-HDD-DUPLICATOR-N1
Top
Rear
1 to 1 M.2 NVMe Drive Duplicator Dock
Component Function
1Target Drive Bay Insert the to Copy toTarget M.2 NVMe Drive
2Source Drive Bay Insert the to Copy from Source M.2 NVMe Drive
3Mode Selector Switch Press and Hold to change between or PC
Duplicator Mode
4Mode LED Indicators Solid Green: PC Mode
Solid Blue: Duplicator Mode
5Progress LED Indicators Indicates progress from during the 25% to 100%
Duplication process
6Drive LEDs
Solid Blue: M.2 Drive Indicates the is detected
Flashing Red: M.2 There is an error reading the
Drive M.2 Drive or the was removed during
duplication
Solid Purple: Target M.2 DriveIndicates the is
too small to duplicate to
7Start Button Starts the processDrive Duplication
See section for more informationOperation
8USB-C Host Connection
Connect the to an Drive Duplicator Dock
available on a USB-C Port Host Computer
Only required for PC Mode
9DC Power Input Connect the included Universal Power Adapter
10 Power Switch Turn the or M.2 Drive Duplicator Dock On O
Requirements
For the latest product information, technical specications, and declarations of
conformance, please visit: www.StarTech.com/M2-HDD-DUPLICATOR-N1
Package Contents
M.2 Drive Duplicator Dock x 1
3ft (1m) USB-C to USB-C Cable x 1
3ft (1m) USB-A to USB-C Cable x 1
Universal Power Adapter (NA/UE/UK/ANZ) x 1
Quick-Start Guide x 1
1
2
3 4 65 7
8 9 10
Regulatory Compliance
FCC - Part 15
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including
interference that may cause undesired operation. Changes or modications not expressly approved by StarTech.com could
void the user’s authority to operate the equipment.
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe [B] est conforme à la norme NMB-003 du Canada.
CAN ICES-3 (B)/NMB-3(B)
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) This device may not cause interference, and (2) This device must accept any interference, including interference that may
cause undesired operation of the device.
Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation
est autorisée aux deux conditions suivantes:
(1) l’appareil ne doit pas produire de brouillage, et (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en compromettre le fonctionnement.
Warranty Information
This product is backed by a two-year warranty.
For further information on product warranty terms and conditions, please refer to www.startech.com/warranty.
Limitation of Liability
In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their ocers, directors, employees or agents)
for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of prots, loss
of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the
product. Some states do not allow the exclusion or limitation of incidental or consequential damages. If such laws apply, the
limitations or exclusions contained in this statement may not apply to you.
FR: startech.com/fr
DE: startech.com/de
ES: startech.com/es
NL: startech.com/nl
IT: startech.com/it
JP: startech.com/jp
StarTech.com
Ltd.
45 Artisans Cres
London, Ontario
N5V 5E9
Canada
StarTech.com Ltd.
Unit B, Pinnacle 15
Gowerton Rd,
Brackmills
Northampton
NN4 7BW
United Kingdom
StarTech.com LLP
4490 South Hamilton
Road
Groveport, Ohio
43125
U.S.A.
StarTech.com Ltd.
Siriusdreef 17-27
2132 WT Hoofddorp
The Netherlands
Copy a Drive
1. Press the until the is .Mode Selector Button Duplicator Mode LED Solid Blue
2. Ensure the and are in the correct . Source Target Drives Drive Bays
3. Press and Hold the until the begin to ash. Start Button Progress LED Indicators
Immediately release and press the once more. The will begin Start Button 25% LED
to ash to indicate the duplication process is in progress.
Warning! Do not disconnect either drive or interrupt the process until the duplication
process has completed. Doing so may result in damage to the drive or lost data.
Note: As each 25% segment of the duplication process nishes, the corresponding
LED will turn solid, while the subsequent LED will begin to ash
4. When are no longer ashing and have become solid, All Progress LED Indicators
the duplication process is complete.
Installation
Power the Drive Duplicator Dock
1. Connect the to the appropriate .Universal Power Adapter Regional Power Tip
2. Connect the to the , located on the rear of Universal Power Adapter DC Power Input
the .M.2 Drive Duplicator Dock
3. Toggle the , located on the rear of the , to Power Switch M.2 Drive Duplicator Dock
the position.ON
Note: The M.2 Drive Duplicator Dock should be powered o before removing or adding
drives to the Target/Source Drive Bays.
Operation
Warning! M.2 Drives can become hot during duplication or prolonged data transfer
sessions. Avoid touching the M.2 Drives immediately after use to prevent burns or
damage. Allow the drives to cool down before removing/handling.
Connect to a Computer
1. Insert a into the and/or .M.2 NVMe Drive Source Target Drive Bay
2. Press the until the is .Mode Selector Button PC Mode LED Solid Green
3. Connect the included from the , located on the rear of the USB-C Cable USB-C Port
Drive Duplicator Dock USB-C Port Host Computer, to an available on the .
4. The will automatically detect and install the required .Host Computer Drivers

Produktspecifikationer

Varumärke: StarTech.com
Kategori: Inte kategoriserad
Modell: M2-HDD-DUPLICATOR-N1

Behöver du hjälp?

Om du behöver hjälp med StarTech.com M2-HDD-DUPLICATOR-N1 ställ en fråga nedan och andra användare kommer att svara dig




Inte kategoriserad StarTech.com Manualer

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer