StarTech.com USB100BT Bruksanvisning

Läs nedan 📖 manual på svenska för StarTech.com USB100BT (5 sidor) i kategorin Nätverkskort/adapter. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/5
USB to 10/100 Mbps Ethernet Adapter
10/100 Mbps Network Adapter
Installation Manual
USB100BT
1
Overview
The StarTech.com USB to 10/100 Mbps Ethernet
adapter allows any PC running Windows 98 or 2000 to
connect to an Ethernet network. Its small size and
convenient USB connection allow it to be installed
without opening the computer, making it perfect for
notebook PCs or computers that have all their
expansion slots filled.
The USB100BT is perfect for connecting a notebook PC
to a network or connecting a PC with no available
IRQs on a network.
Features
Autosenses 10 or 100 Mbps network speed
• Is installed without opening the computer
• Works with Windows 98/2000/ME
• LEDs indicate connection speed, link, and activity
• Supports full duplex ethernet connections
Specifications
USB Standards USB Specification 1.1
Ethernet Standards IEEE 802.3 and 802.3u
Connectors 1x RJ45 and 1x USB type B
LEDs 10/100 Mbps, Link/Activity
Driver Support Windows 98/2000/ME
Dimensions 3.15 x 1.8 x 0.83 inches
(80mm x 46mm x 21mm)
Weight 50g
Operating Temperature 0 - 50 degrees Celsius
Humidity 10 - 90% non-condensing
Certification FCC, CE Mark
2
Getting Started
This section is to help you prepare the USB100BT for
installation. Please read through this section carefully
before attempting to install the USB100BT.
Unpacking the USB100BT
1 x Ethernet adapter
1 x USB A-B cable
1 x Driver disk
Installation
Hardware Installation
1. Connect the RJ45 connector of the USB adapter to
the 10/100Mbps hub/switch of your LAN by using
a twisted-pair cable (maximum length 100 meters).
Use Category 3, 4 or 5 cable for 10Mbps Ethernet
and Category 5 cable for 100Mbps Fast Ethernet.
2. Connect the USB Type B connector is the USB
adapter and your PC’s or USB Hub’s USB Type A
connector by using the standard USB cable
(maximum length 5m).
Software Installation
The drivers and utilities are supplied on the diskette
included in this package.
Before you install the USB device driver, you must
first make sure that your computer’s USB controller
device has been properly detected and configured
under Windows. Also make sure that the USB port is
enabled. Check your computer’s user’s manual for

Produktspecifikationer

Varumärke: StarTech.com
Kategori: Nätverkskort/adapter
Modell: USB100BT

Behöver du hjälp?

Om du behöver hjälp med StarTech.com USB100BT ställ en fråga nedan och andra användare kommer att svara dig




Nätverkskort/adapter StarTech.com Manualer

Nätverkskort/adapter Manualer

Nyaste Nätverkskort/adapter Manualer