Summit PRO24G Bruksanvisning

Summit Ugn PRO24G

Läs nedan 📖 manual på svenska för Summit PRO24G (1 sidor) i kategorin Ugn. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/1

How to attach the BG24 Stainless Steel Backguard

to the PRO24G Gas Range

The backguard is shown below, facing forward:

1. To attach the backguard to the range, you will have to stand behind the range. As

you look down you will see two black, rectangular projections on the rear edge of the

range, one at either side. These are the bolts that will hold the backguard to the top

of the range.

2. Remove each bolt by reaching under and unscrewing the nut that holds the bolt in

place.

3. Put the bolts into the slots on the bottom of the backguard and place the backguard

over the range bolts are over the two bolt holes. Reach through the so that the

circular cut-outs on the rear of the backguard to manipulate the bolts into the bolt

holes.

4. Loosely attach the bolts with the nut you removed in step 2 Do not tighten until you s .

are satisfied that the backguard is positioned correctly on the range.

The finished assembly should look like this:

Produktspecifikationer

Varumärke:	Summit
Kategori:	Ugn
Modell:	PRO24G
Färg på produkten:	Wit
Inbyggd display:	Ja
Snäll:	Digitale volumeregelaar
Monteringsmetod:	Wandmontage
RS-485-portar:	1
Ingångsdriftspänning (max):	18 V
Krafthantering:	- W