Supermicro SuperServer 5019P-WTR Bruksanvisning

Supermicro Server SuperServer 5019P-WTR

Läs nedan 📖 manual på svenska för Supermicro SuperServer 5019P-WTR (14 sidor) i kategorin Server. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/14
Information for Lot 9 of d )ErP (Eco esign
This addendum addresses E European Union (EU) codesign requirements for servers and storage
products addendum product. All and ratings within this data are in reference only Supermicro to the (s) in
the manual. The below information conforms ommission to requirements laid down Cin Annex II of the
R . egulation 2019/424
3(1)(a): e See Section 1.1 of th system manual for the product type.
3(1)(b): See the title page and preface of the system manual for the trademark and
manufacturer’s address.
3(1)(c): (s). See the title page of the system manual for product model number
3(1)(d): . See the serial number on the physical system to determine the year of manufacture
3(1)(e-j): PSU E actor V ) (F fficiency and Power F alue (Table rom 80 Plus report)
PSU Model #: PWS- -504P
1R
Watts: 500W
PSU Efficiency
Power orFact
% of Rated Load
% % % %10 20 50 100
50 %
Single -Output (AC DC)
86.16%
91.84%
94.11%
92.61%
0.97
System (EUT) Efficiency in Idle State P ower (Table)
Representative
Configurations
Measured Idle State
Power (W)
Calculated Idle Power
Allowance (W)
High-End Performance
Configuration
109.3
2 89.2
Typical Configuration
N/A
N/A
Low-End Performance
Configuration
71.7
2 5 32.
System E P(EUT) fficiency in A Sctive tate ower (Table)
Representative
Configurations
E Score fficiency
Minimum A Sctive tate
Efficiency
High-End Performance
Configuration
2 2.2
Typical Configuration
N/A
9
Low-End Performance
Configuration
1 28.
3(1)( is k): The operating condition class A2.
Dry bulb °Ctemp
Humidity range, non condensing-
Operating
condition
class
Allowable
range
Recom
mended
range
Allowable range
Recommended range
Max dew
point (°C)
Maximum
rate of
change
C/hr)
A1
15- 32
18 27-
12 and °C Dew P oint (DP)
8 % (RH) relative humidity to
17 80 ° C DP and % RH
9 °C DP to
15 °C DP and
60 % RH
17
5/20
A2
10 35-
18 27-
12 and to °C DP 8 % RH
21 °C DP % RHand 80
Same A1as
21
5/20
A3
5-40
18 27-
12 and to °C DP 8 % RH
24 °C DP % RHand 85
Same A1as
24
5/20
A4
5-45
18 27-
12 and to °C DP 8 % RH
24 °C DP % RHand 90
Same A1as
24
5/20
3(1)(l): The idle state power at the higher boundary temperature of the operating conditions
class is 128.97W.
3(1)( ism): The active state efficiency and performance a minimum of 1 2. 8.
3(1)(n): There are two methods by which a user can securely delete data from this system. The
user performing secure data deletion should be an IT professional.
The first is with a Unified Extensible Firmware Interface (UEFI) shell utility. This utility
works on X10/X11/H11/H12/M11 motherboard series with onboard SATA/NVMe devices.
Any user may access and download this utility through following link:
https://www.supermicro.com/about/policies/disclaimer.cfm?url=/wftp/utility/Lot9_Secure
_Data_Deletion_Utility/
Download the shell utility package and extract it to a USB flash drive, then plug the drive
into the server for which secure data deletion is necessary. Then turn the system on.
Navigate to the BIOS setup menu, then place the server system into the UEFI shell
environment. Follow the instructions in the README file to invoke the utility and
complete the deletion.
The second method is through the secure data deletion tool provided by the original
manufacturer of the hard drive. This should be used in a scenario where the shell utility
is not applicable. Each manufacturer should have the tool available on their website. If
needed, please look on the hard drive label for the name of the manufacturer and model
information.
3(1)(o): List of recommended combinations of blade servers with chassis: N/A.
3(1)(p): . List of all current SKUs within this product family: N/A
3(3)(a): There is no use of cobalt in batteries in this product.
The indicative weight range of eodymium in the HDD is if manufactured by Western n 0.0
Digital, and is 25 grams if manufactured by Seagate.between 5-
3(3)(b): Please see the disassembly instructions on the next page.

Produktspecifikationer

Varumärke: Supermicro
Kategori: Server
Modell: SuperServer 5019P-WTR

Behöver du hjälp?

Om du behöver hjälp med Supermicro SuperServer 5019P-WTR ställ en fråga nedan och andra användare kommer att svara dig




Server Supermicro Manualer

Server Manualer

Nyaste Server Manualer