Supermicro SuperServer 6019P-WTR Bruksanvisning

Supermicro Server SuperServer 6019P-WTR

Läs nedan 📖 manual på svenska för Supermicro SuperServer 6019P-WTR (12 sidor) i kategorin Server. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/12
Information for Lot 9 of ErP (Ecodesign)
This addendum addresses European Union (EU) Ecodesign requirements for servers and storage
products. All data and ratings within this addendum are in reference only to the Supermicro product(s) in
the manual. The below information conforms requirements laid down in Annex II of the Commission to
Regulation 2019/424.
3(1)(a): See section 1.1 of the manual for the product type.
3(1)(b): See the title page and preface of the system manual for the trademark and
manufacturer’s address.
3(1)(c): See the title page of the system manual for product model number(s).
3(1)(d): See the serial number on the physical system to determine the year of manufacture.
3(1)(e-j ): PSU Efficiency and Power Factor Value (Table) (From 80 Plus report)
PSU Model #: PWS-706P- 1R
Watts: 750W
PSU Efficiency
Power Factor
% of Rated Load
10%
20%
50%
100%
50%
Single Output (AC-DC)
88.83%
94.05%
94.64%
91.77%
0.99
System (EUT) Efficiency in Power (Table) Idle State
Representative
Configurations
Measured Idle State
Power (W)
High-End Performance
Configuration
162.5
Typical Configuration
N/A
Low-End Performance
Configuration
138.5
System (EUT) Efficiency in Power (Table) Active State
Representative
Configurations
Active State
Efficiency Score
(Effserver)
Minimum Active State
Efficiency for 2-Socket
Server
High-End Performance
Configuration
29.7
9.5
Typical Configuration
N/A
Low-End Performance
Configuration
24.4
3(1)(k): The operating condition class is A2.
Dry Bulb Temp °C
Humidity Range
(N -Condensing) on
Operating
Condition
Class
Allowable
Range
Recommended
Range
Allowable Range
Dew Point (DP)
Relative Humidity
(RH)
Recommend
Range
Max
Dew
Point
(°C)
Max
Rate of
Change
(°C/hr.)
A1
15 32-
18 27-
– 12 °C DP and 8 %
RH to 17 °C DP and
80 % RH
-9°C DP to
15°C and
60% RH
21
5/20
A2
10 35-
18 27-
– 12 °C DP and 8 %
RH to 21 °C DP and
80 % RH
Same as A1
21
5/20
A3
5- 40
18 27-
– 12 °C DP and 8 %
RH to 24 °C DP and
85 % RH
Same as A1
24
5/20
A4
5- 45
18 27-
– 12 °C DP and 8 %
RH to 24 °C DP and
90 % RH
Same as A1
24
5/20
3(1)(l): The idle state power at the higher boundary temperature of the operating conditions
class: 191.75W.
3(1)(m): The active state efficiency and performance: 29.7.
3(1)(n): There are two methods by which a user can securely delete data from this system. The
user performing secure data deletion should be an IT professional.
The first is with a Unified Extensible Firmware Interface (UEFI) shell utility. This utility
works on X10/X11/H11/H12/M11 motherboard series with onboard SATA/NVMe devices.
Any user may access and download this utility through following link:
https://www.supermicro.com/about/policies/disclaimer.cfm?url=/wftp/utility/Lot9_Secure
_Data_Deletion_Utility/
Download the shell utility package and extract it to a USB flash drive, then plug the drive
into the server for which secure data deletion is necessary. Then turn the system on.
Navigate to the BIOS setup menu, then place the server system into the UEFI shell
environment. Follow the instructions in the README file to invoke the utility and
complete the deletion.
The second method is through the secure data deletion tool provided by the original
manufacturer of the hard drive. This should be used in a scenario where the shell utility
is not applicable. Each manufacturer should have the tool available on their website. If
needed, please look on the hard drive label for the name of the manufacturer and model
information.
3(1)(o): List of recommended combinations of blade servers with chassis: N/A.
3(1)(p): List of all current SKUs within this product family SYS-6019P-WTR. :
3(3)(a): There is no use of cobalt in batteries in this product.
The indicative weight range of Neodymium in the HDD is 0.0 if manufactured by Western
Digital, and is between 5-25 grams if manufactured by Seagate.
3(3)(b): Please see the disassembly instructions on the next page.

Produktspecifikationer

Varumärke: Supermicro
Kategori: Server
Modell: SuperServer 6019P-WTR

Behöver du hjälp?

Om du behöver hjälp med Supermicro SuperServer 6019P-WTR ställ en fråga nedan och andra användare kommer att svara dig


Server Supermicro Manualer

Supermicro

Supermicro SuperServer 6019U-TR4 Bruksanvisning

31 Januari 2025
Supermicro

Supermicro SuperServer 2028TR-HTFR Bruksanvisning

9 Januari 2025
Supermicro

Supermicro SuperBlade SBI-4129P-C2N Bruksanvisning

29 December 2024
Supermicro

Supermicro SuperServer F619P2-RC1 Bruksanvisning

29 December 2024
Supermicro

Supermicro SuperServer E300-9A-4C Bruksanvisning

29 December 2024
Supermicro

Supermicro SuperServer 5029AP-TN2 Bruksanvisning

29 December 2024
Supermicro

Supermicro SuperServer 5038K-I-NF3 Bruksanvisning

29 December 2024
Supermicro

Supermicro SuperServer 5019A-FTN10P Bruksanvisning

29 December 2024
Supermicro

Supermicro SC833T-550 Bruksanvisning

29 December 2024
Supermicro

Supermicro SC812i-420 Bruksanvisning

29 December 2024

Server Manualer

Nyaste Server Manualer

MSI

MSI S2205-04-10G Bruksanvisning

10 Mars 2025
MSI

MSI S1102-01 Bruksanvisning

10 Mars 2025
MSI

MSI S2206-06-10G Bruksanvisning

10 Mars 2025
MSI

MSI S2201 Bruksanvisning

10 Mars 2025
MSI

MSI S2205-04 Bruksanvisning

10 Mars 2025
MSI

MSI S1201 Bruksanvisning

10 Mars 2025
MSI

MSI S2206-04 Bruksanvisning

10 Mars 2025
MSI

MSI S2205-01 Bruksanvisning

10 Mars 2025
MSI

MSI S1206-01 Bruksanvisning

10 Mars 2025
Dell

Dell PowerEdge R470 Bruksanvisning

20 Februari 2025