Supermicro X12SDV-10C-SPT4F Bruksanvisning

Supermicro moderkort X12SDV-10C-SPT4F

Läs nedan 📖 manual på svenska för Supermicro X12SDV-10C-SPT4F (1 sidor) i kategorin moderkort. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/1
SUPERMICR R
ContaCt nformatIon I
Manuals: http://www.supermicro.com/support/manuals
Drivers & Utilities: https://www.supermicro.com/wdl/driver/
Safety: http://www.supermicro.com/about/policies/safety_information.cfm
© 2022 Supermicro Computer Inc. All rights reserved. Reproduction of this document whether in part or in whole is strictly prohibited without Supermicro's written
consent. All Trademarks are property of their respective entities. All information provided is deemed accurate at the time of printing; however, it is not guaranteed.
P CaCkage ontents
X12sDV-4C/8C/10C-sPt4f
Q r g 1.0uICk eferenCe uIDe a
One Supermicro Motherboard
One Quick Reference Guide
One I/O Shield
One COM Port Cable
Website: www.supermicro.com
General Information: marketing@supermicro.com
Technical Support: support@supermicro.com
Phone: +1 (408) 503-8000, Fax: +1 (408) 503-8008
f or your system to work ProPerly Please DownloaD aPProPrIate,
DrIVers Images user s manual from the lInks below/ / ' :
MNL-2478-QRG-10a
WARNING: This product can expose you to chemicals including
lead, known to the State of California to cause cancer and birth
defects or other reproductive harm. For more information, go
to www.P65Warnings.ca.gov.
!
One OCuLink to U.2 Cable
One ATX Power Signal Cable
One OCuLink to four SATA
Cables
M-KEY
2-3:POWER FORCE ON
1-2:NORMAL
JPF1:
1-2 OPEN:ENABLE
1-2 SHORT:DISABLE
JBM1:IPMI Share LAN
JPI2C1:PWR I2C
:1-4 SPEAKER
IPMI_LAN
:SMBus1
USB 0/1
USB 2/3(3.0)
2-3:ME MANUFACTURING MODE
1-2:NORMAL
JPME2:
JRK1:RAID KEY-1
ON
PWR
RST
CPU SLOT7 PCIe 4.0 X8
JMD1:M.2-HC PCIe 4.0 X4/SATA 3.0
TPM/PORT80
FF
X
OH
NIC2
JF1:
1-2:ENABLE
2-3:DISABLE
JPT1:TPM
NIC1
JWD1:WATCH DOG
LED LED
HDD PWR
2-3:NMI
1-2:RST
2-3:DISABLE
JPG1:VGA
1-2:ENABLE
VGA
CPU
LAN3/4
CHASSIS INTRUSION
LAN1/2
: CMOS Clear
DIMMB1
DIMMA1
JPTG1:10Gb LAN
1-2:ENABLE
2-3:DISABLE
X12SDV-4C-SPT4F
REV:1.00
PRESS FIT
BAR CODE
DESIGNED IN USA
JMD1
MH2
MH4 MH3
MH1
JPCIe7
LEDT4
LEDT2
JGP1
P1_NVME0
JSMB1
JMD1_SRW1
JIPMB1
JD1
JUIDB1
JRK1
JTPM1
FANA
FAN2
FAN1
COM1
JVRM1
JPTG1
JPME2
JWD1
JPG1
JPF1
JPT1
JBT1
JPI2C1
JL1
JBM1
LEDT3
LEDT1
LEDM1
BT1
JPH1
LED2
LED3
LED1
JPV1
JF1
PJ1
Jumpers and Connectors
CPU and Memory Support
Motherboard Layout and Features
Note: Graphics shown in this quick reference guide are for illustration only. Your components may or may not look exactly the same as drawings shown in this guide. Note: Refer to Chapter 1 of the User Manual for detailed information on jumpers, connectors,
and LED indicators.
Note: Refer to Chapter 2 of the User Manual for detailed information on memory support and CPU/
motherboard installation instructions.
= mounting hole
Jumper Description Default Setting
JBM1 IPMI Shared LAN Enable/Disable Open (Enabled)
JBT1 CMOS Clear Open (Normal)
JPG1 VGA Enable/Disable Pins 1-2 (Enabled)
JPME2 ME Manufacturing Mode Pins 1-2 (Normal)
JPT1 Onboard TPM 2.0 Enable/Disable Pins 1-2 (Enabled)
JPTG1 LAN1/2 Enable/Disable Pins 1-2 (Enabled)
JWD1 Watchdog Timer Pins 1-2 (Reset)
LED Description Status
LED1 Power LED Solid Green: Power On
LED2 UID LED Solid Blue: Unit Identied
LED3 Overheat/PWR Fail/
Fan Fail
Solid Red: Overheat
Blinking Red: PWR Fail or Fan
Fail
LEDM1 BMC Heartbeat LED Blinking Green: BMC Normal
Connector Description
BT1 Onboard Battery
COM1 COM Header
FAN1-FAN2, FANA CPU/System Fan Headers
IPMI LAN Dedicated IPMI LAN Port
JD1 Internal Speaker Header (Pins 1-4: Speaker)
JF1 Front Control Panel Header
JGP1 General Purpose I/O Header
JIPMB1 4-pin BMC External I²C Header
JL1 Chassis Intrusion Header
JMD1 M.2 M-Key 2280 (PCIe 4.0 x4/SATA 3.0) Slot
JMD1_SRW1 M.2 Mounting Hole
JPH1 4-pin HDD Power Connector
JPI2C1 Power System Management Bus I
2C Header
JPV1 8-pin 12V DC Power Input (Required for 12V only or 24-pin
ATX Power)
JRK1 Intel® RAID Key Header
JSMB1 System Management Bus Header
JTPM1 Trusted Platform Module/Port 80 Connector
JUIDB1 Unit Identier Switch
LAN1/2 10GbE Base-T RJ45 LAN Ports
LAN3/4 25GbE SFP28 LAN Ports
P1_NVME0 PCIe 3.0 p1-x4 OCuLink Connectors (Support PCIex4 or 4xSATA)
PJ1 ATX Power Signal Header (Supermicro P/N for cable: CBL-
PWEX-1063)
SLOT7 PCIe 4.0 p1-x8 Slot
USB0/1 USB 2.0 Header
USB2/3 Back Panel USB 3.0 Ports
VGA VGA Port
Front Control Panel
LED Indicators
Power Button
OH/Fan Fail LED
NIC1 Activity LED
Reset Button
HDD LED
PWR LED
Reset
PWR
3.3V Stby
Ground
15
3.3V Stby
16
1 2
Ground
NIC2 Activity LED
PWR Fail LED
UID
3.3V
3.3V
3.3V Stby
The X12SDV-4C/8C/10C-SPT4F motherboard supports the Intel Xeon D-1700
processor series with up to 10 cores and a thermal design power (TDP) of up
to 90W.
The motherboard supports up to 128GB of ECC and Non-ECC RDIMM/UDIMM
DDR4 memory with speeds of up to 2933MT/s in two memory slots.
Connectors
Jumpers
Back Panel I/O Connectors
# # #Description Description Description
1. IPMI_LAN 5. LAN1 9. UID Switch
2. USB3 6. LAN4
3. USB2 7. LAN3
4. LAN2 8. VGA
1
6
5
4
3
298
7
DIMM Memory Installation
When installing memory modules, the DIMM slots should be populated in the fol-
lowing order: DIMMA1, DIMMB1.
It is recommended to use DDR4 memory of the same type, size, and speed.
Mixed DIMM speeds can be installed. However, all DIMMs will run at the
speed of the slowest DIMM.
The motherboard will support odd-numbered modules (one installed).
However, to achieve the best memory performance, a balanced memory
population is recommended.
Type Ranks Per DIMM
and Data Width
DIMM Capacity (GB) Speed (MT/s); Voltage (V);
Slot Per Channel (SPC) and
DIMM Per Channel (DPC)
8Gb 16 Gb 1DPC
RDIMM
SRx8 (RC D) 8GB 16GB
2933
SRx4 (RC C) 16GB 32GB
DRx8 (RC E) 16GB 32GB
DRx4 (RC A) 32GB 64GB
ECC UDIMM SRx8 8GB 16GB
Non-ECC
UDIMM DRx8 16GB 32GB

Produktspecifikationer

Varumärke: Supermicro
Kategori: moderkort
Modell: X12SDV-10C-SPT4F

Behöver du hjälp?

Om du behöver hjälp med Supermicro X12SDV-10C-SPT4F ställ en fråga nedan och andra användare kommer att svara dig