Supermicro X6DA8-G Bruksanvisning

Supermicro moderkort X6DA8-G

Läs nedan 📖 manual på svenska för Supermicro X6DA8-G (106 sidor) i kategorin moderkort. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/106

X6DA8-G

X6DAE-G

X6DA8-G2

X6DAE-G2

USER’S MANUAL

Revision 1.1b

SUPER

The information in this User’s Manual has been carefully reviewed and is believed to be

accurate. SUPER MICRO COMPUTER assumes no responsibility for any inaccuracies that

may be contained in this document, makes no commitment to update or to keep current the

information in this manual, or to notify any person or organization of the updates.

Please Note: For the most up-to-date version of this manual, please

see our web site at www.supermicro.com.

SUPER MICRO COMPUTER reserves the right to make changes to the product described

in this manual at any time and without notice. This product, including software, if any, and

documentation may not, in whole or in part, be copied, photocopied, reproduced, translated

or reduced to any medium or machine without prior written consent.

IN NO EVENT WILL SUPER MICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT,

SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR

INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE

POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER SHALL

NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED

WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING,

INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE, OR

DATA.

Any disputes arising between manufacturer and customer shall be governed by the laws of

Santa Clara County in the State of California, USA. The State of California, County of

Santa Clara shall be the exclusive venue for the resolution of any such disputes.

Supermicro's total liability for all claims will not exceed the price paid for the hardware

product.

*California Best Management Practices Regulations for Perchlorate Materials

This Perchlorate warning applies only to products containing CR (Manganese Dioxide) Lithium coin

cells. "Perchlorate Material-special handling may apply. See WWW.dtsc.ca.gov/hazardouswaste/

perchlorate".

*FCC Statement: This equipment has been tested and found to comply with the limits for a

Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses, and can radiate radio frequency energy and, if not installed and

used in accordance with the manufacturer’s instruction manual, may cause interference with

radio communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, you are encouraged

to try to correct the interference by one or more of the following measures:

· Reorient or relocate the receiving antenna.

· Increase the separation between the equipment and the receiver.

· Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

· Consult the dealer or an experienced radio/television technician for help.

Revision Number: Rev. 1.1b

Release Date: June 5, 2007

Unless you request and receive written permission from SUPER MICRO COMPUTER, you

may not copy any part of this document.

Information in this document is subject to change without notice. Other products and

companies referred to herein are trademarks or registered trademarks of their respective

companies or mark holders.

Printed in the United States of America

iii

Preface

About This Manual

This manual is written for system integrators, PC technicians and

knowledgeable PC users. It provides information for the installation and use

of the X6DA8-G/X6DAE-G/X6DA8-G2/X6DAE-G2 motherboard. The

X6DA8-G/X6DAE-G/X6DA8-G2/X6DAE-G2 supports single or dual

Intel® Xeon NoconaTM processors at a 800 MHz front side bus. Based

upon Intel's NetBurst microarchitecture with EM64T support, the Nocona

processor supports the IA-32 software and includes features found in the

XeonTM processor such as Hyper Pipelined Technology, which includes a

multi-stage pipeline, allowing the processor to operate at much higher core

frequencies. Packaged in a 604-pin Flip Chip Micro Pin Grid Array(FC-

mPGA4) platform in a Zero Insertion Force(ZIF) socket (mPGA 604), the

Nocona Processor (800 MHz) supports Hyper-Threading Technology and

is ideal for high performance workstation and server environments with up

to two processors on one system bus. Please refer to the motherboard

specifications pages on our web site (http://www.supermicro.com/products/

motherboard/) for updates on supported processors. This product is in-

tended to be professionally installed.

Manual Organization

Chapter 1 begins with a checklist of what should be included in your

mainboard box, describes the features, specifications and performance of

the motherboard and provides detailed information about the chipset.

Chapter 2 begins with instructions on handling static-sensitive devices.

Read this chapter when you want to install the processor and DIMM memory

modules and when mounting the mainboard in the chassis. Also refer to

this chapter to connect the floppy and hard disk drives, SCSI drives, the IDE

interfaces, the parallel and serial ports, the keyboard and mouse, the power

supply and various control panel buttons and indicators.

If you encounter any problems, see Chapter 3, which describes trouble-

shooting procedures for the video, the memory and the setup configuration

stored in CMOS. For quick reference, a general FAQ [Frequently Asked

Questions] section is provided.

Chapter 4 includes an introduction to BIOS and provides detailed informa-

tion on running the CMOS Setup utility.

Appendix A gives information on BIOS POST messages.

Appendix B provides software and the OS installation instructions.

Produktspecifikationer

Varumärke:	Supermicro
Kategori:	moderkort
Modell:	X6DA8-G
Färg på produkten:	Zwart
Inbyggd display:	Nee
Sladdlängd:	1.8 m
Anslutningsteknik:	Bedraad
Typ av strömkälla:	USB
fingeravtrycksläsare:	Nee
Antal tangenter, tangentbord:	105
Hållbarhetscertifikat:	CE, Federal Communications Commission (FCC), REACH, RoHS, UKCA
Stöder Windows:	Ja
Typ av bakgrundsbelysning:	RGB LED
Rekommenderad användning:	Gamen
Bakgrundsbelysning:	Ja
Förbindelse:	USB
Genvägar:	Ja
Numerisk knappsats:	Ja
Inkluderar mus:	Nee
Pekdon:	Nee
Överensstämmelse med hållbarhet:	Ja
Ytfärg:	Monochromatisch
Kontaktledarmaterial:	Goud
Tangentbordslayout:	QWERTZ
Programmerbara snabbtangenter:	Ja
Handledsstöd:	Nee
Inbyggt minne:	Ja
Tangentbordsknappbrytare:	Mechanische keyswitch
Tangentbordsmått (BxDxH):	436.2 x 134.6 x 40 mm
Tangentbords vikt:	1094 g
Språktangentbord:	Duits
Multimedia nycklar:	Ja
Livslängd för tangentbordstangenter:	20 miljoen tekens
Rulla över:	N-toets rollover
Röstningskvot:	1000 Hz
Driftskraft:	45 g
Inbyggd-minneskapacitet:	512 KB
Anpassningsbar bakgrundsbelysning:	Ja
Flexibelt tangentbord:	Nee