Supermicro X6DAL-TB2 Bruksanvisning
Supermicro
moderkort
X6DAL-TB2
Läs nedan 📖 manual på svenska för Supermicro X6DAL-TB2 (116 sidor) i kategorin moderkort. Denna guide var användbar för 7 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/116
®
X6DAL-B2
X6DAL-TB2
USER’S MANUAL
Revision 1.1
SUPER
The information in this User’s Manual has been carefully reviewed and is believed to be
accurate. The vendor assumes no responsibility for any inaccuracies that may be contained
in this document, makes no commitment to update or to keep current the information in this
manual, or to notify any person or organization of the updates. Please Note: For the most
up-to-date version of this manual, please see our web site at www.supermicro.com.
SUPER MICRO COMPUTER reserves the right to make changes to the product described in
this manual at any time and without notice. This product, including software, if any, and
documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or
reduced to any medium or machine without prior written consent.
IN NO EVENT WILL SUPER MICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM
THE USE OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF AD-
VISED OF THE POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO
COMPUTER SHALL NOT HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA
STORED OR USED WITH THE PRODUCT, INCLUDING THE COSTS OF REPAIRING, RE-
PLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH HARDWARE, SOFTWARE,
OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of
Santa Clara County in the State of California, USA. The State of California, County of Santa
Clara shall be the exclusive venue for the resolution of any such disputes. Super Micro’s total
liability for all claims will not exceed the price paid for the hardware product.
This equipment has been tested and found to comply with the limits for a Class B digital
device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with
the manufacturer’s instruction manual, may cause interference with radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, you are encouraged to try to correct the
interference by one or more of the following measures: · Reorient or relocate the receiving
antenna. · Increase the separation between the equipment and the receiver. · Connect the
equipment into an outlet on a circuit different from that to which the receiver is connected.
· Consult the dealer or an experienced radio/television technician for help.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Per-
chlorate Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlor-
ate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to the
State of California to cause birth defects and other reproduc-
tive harm.
Revision Number: Rev. 1.1
Release Date: June 12, 2007
Unless you request and receive written permission from SUPER MICRO COMPUTER, you
may not copy any part of this document.
Information in this document is subject to change without notice. Other products and
companies referred to herein are trademarks or registered trademarks of their respective
companies or mark holders.
Copyright © 2007 by SUPER MICRO COMPUTER INC.
All rights reserved.
Printed in the United States of America
iii
Preface
Preface
About This Manual
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use
of the X6DAL-B2/X6DAL-TB2 motherboard. The X6DAL-
B2/X6DAL-TB2 supports single or dual Intel® Xeon NoconaTM processors at
a 800 MHz front side bus. Based upon Intel's NetBurst microarchitecture,
the Xeon EM64T (Nocona) processor supports IA-32 and IA-64 software
and includes features found in the XeonTM processor such as Hyper
Pipelined Technology, which includes a multi-stage pipeline, allowing the
processor to operate at much higher core frequencies. Packaged in a 604-
pin Flip Chip Micro Pin Grid Array(FC-mPGA4) platform in a Zero Insertion
Force(ZIF) socket (mPGA 604), the Xeon EM64T Processor (800 MHz) sup-
ports Hyper-Threading Technology and is ideal for high performance work-
station and server environments with up to two processors on one system
bus. Please refer to the motherboard specifications pages on our web site
(http://www.supermicro.com/products/motherboard/) for updates on sup-
ported processors. This product is intended to be professionally installed.
Manual Organization
Chapter 1 begins with a checklist of what should be included in your
mainboard box, describes the features, specifications and performance of
the motherboard and provides detailed information about the chipset.
Chapter 2 begins with instructions on handling static-sensitive devices.
Read this chapter when you want to install the processor and DIMM memory
modules and when mounting the mainboard in the chassis. Also refer to
this chapter to connect the floppy and hard disk drives, SCSI drives, the IDE
interfaces, the parallel and serial ports, the keyboard and mouse, the power
supply and various control panel buttons and indicators.
If you encounter any problems, see Chapter 3, which describes trouble-
shooting procedures for the video, the memory and the setup configuration
stored in CMOS. For quick reference, a general FAQ [Frequently Asked
Questions] section is provided.
Chapter 4 includes an introduction to BIOS and provides detailed informa-
tion on running the CMOS Setup utility.
Appendix A lists BIOS Error Beep Codes and DS LED POST Codes.
Appendix B provides BIOS POST codes.
Appendix C provides software installation instructions.
Appendix D provides installation instructions on the Adaptec SATA
HostRAID Driver based on Marvell's chip.
Produktspecifikationer
| Varumärke: | Supermicro |
| Kategori: | moderkort |
| Modell: | X6DAL-TB2 |
Behöver du hjälp?
Om du behöver hjälp med Supermicro X6DAL-TB2 ställ en fråga nedan och andra användare kommer att svara dig
moderkort Supermicro Manualer
27 Oktober 2024
27 Oktober 2024
21 Oktober 2024
7 Oktober 2024
25 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
24 September 2024
moderkort Manualer
- moderkort Asus
- moderkort Sharkoon
- moderkort Gigabyte
- moderkort Asrock
- moderkort Evga
- moderkort Intel
- moderkort MSI
- moderkort ECS
- moderkort NZXT
- moderkort Biostar
Nyaste moderkort Manualer
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
27 Oktober 2024
20 Oktober 2024
19 Oktober 2024
18 Oktober 2024
18 Oktober 2024