Supermicro X7DCL-3 Bruksanvisning
Supermicro
moderkort
X7DCL-3
Läs nedan 📖 manual på svenska för Supermicro X7DCL-3 (90 sidor) i kategorin moderkort. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare
Sida 1/90

SUPER
®
X7DCL-3
USER’S MANUAL
Revision 1.0c
X7DCL-i

The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software, if any,
and documentation may not, in whole or in part, be copied, photocopied, reproduced, translated or
reduced to any medium or machine without prior written consent.
IN NO EVENT WILL SUPER MICRO COMPUTER BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
INCIDENTAL, SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE
OR INABILITY TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. IN PARTICULAR, SUPER MICRO COMPUTER SHALL NOT
HAVE LIABILITY FOR ANY HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE
PRODUCT, INCLUDING THE COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING
OR RECOVERING SUCH HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Supermicro's total liability for
all claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a Class
A digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the manufacturer’s instruction manual, may cause harmful
interference with radio communications. Operation of this equipment in a residential area is likely
to cause harmful interference, in which case you will be required to correct the interference at your
own expense.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2009 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America
Manual Revision 1.0c
Release Date: March 11, 2009

Preface
About This Manual
This man ual is wri tten for system in tegrat ors , PC techn icians and
knowledgeable PC users. It provides information for the installation and use of
the X7DCL-3/X7DCL-i motherboard. The X7DCL-3/X7DCL-i
supports dual Intel Xeon Quad Core/Dual Core 5400/5300/5200/5100 Series
processors (w/771 LGA) with a front side bus speed of up to 1.333 GHz. With
dual 64-bit Xeon Quad Core/Dual Core 5400/5300/5200/5100 Series processors
built-in, the X7DCL-3/X7DCL-i offers substantial functionality enhancements to
the motherboards based on the Intel Core microarchitecture while remaining
compatible with the IA-32 software. The features supported by this motherboard
include Intel Virtualization Technology, Enhanced Intel SpeedStep technology,
Extended Memory 64 Technology (EM64T) and Native DDR 2 DIMM modules.
These features allow the motherboard to operate at much higher speeds with
lower power consumption in much safer thermal environments than the traditional
motherboards. The X7DCL-3/X7DCL-i is ideal for complex business applications
and servers. Please refer to the motherboard specications pages on our web site
(http://www.supermicro.com/products/motherboard/) for updates. This product is
intended to be installed and serviced by professional technicians.
Manual Organization
Chapter 1 describes the features, specifications and performance of the
mainboard and provides detailed information about the chipset.
Chapter 2 provides hardware installation instructions. Read this chapter when
installing the processor, memory modules and other hardware components into the
system. If you encounter any problems, see Chapter 3, which describes trouble-
shooting procedures for video, memory and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS, and provides detailed information
on running the CMOS Setup utility.
Appendix A Appendix B lists BIOS POST Error Codes. and Appendix C provide
the Windows OS and other Software Installation Instructions.
Conventions Used in the Manual:
Special attention should be given to the following symbols for proper installation
and to prevent damage done to the components or injury to yourself.
Danger/Caution: Instructions to be strictly followed to prevent catastrophic
system failure or to avoid bodily injury.
Warning: Important information given to ensure proper system installation or
to prevent damage to the components.
Note: Additional Information given to ensure correct system setup.
iii
Preface
Produktspecifikationer
Varumärke: | Supermicro |
Kategori: | moderkort |
Modell: | X7DCL-3 |
Färg på produkten: | Zwart |
Förpackningens vikt: | 17009.71 g |
Förpackningens bredd: | 1450.34 mm |
Djuppackning: | 144.78 mm |
Förpackningshöjd: | 883.92 mm |
Blåtand: | Ja |
Typ av förpackning: | Doos |
Skärm diagonal: | 58 " |
Upplösning: | 3840 x 2160 Pixels |
Original bildförhållande: | 16:9 |
Wi-Fi-standarder: | Wi-Fi 5 (802.11ac) |
Bluetooth-version: | 5.0 |
Inkluderar operativsystem: | Google TV |
Ethernet LAN: | Ja |
Betraktningsvinkel, horisontell: | 178 ° |
Betraktningsvinkel, vertikal: | 178 ° |
Medföljande kablar: | AC |
Skärmform: | Flat |
Ljusstyrka: | - cd/m² |
Snabbstartsguide: | Ja |
LED-bakgrundsbelysning: | Ja |
Antal USB 2.0-portar: | 1 |
Antal HDMI-portar: | 3 |
Audio-ingan (L, R): | 1 |
Kompositvideoingång: | 1 |
Antal Ethernet LAN (RJ-45)-portar: | 1 |
Smart TV: | Ja |
Genomsnittlig effekt: | 20 W |
Strömförbrukning (i standby): | 0.5 W |
Antal högtalare: | 2 |
Hörlursutgångar: | 1 |
Display, antal färger: | 1,07 miljard kleuren |
Analog signalformat: | NTSC |
High Dynamic Range (HDR)-teknologi: | Dolby Vision, High Dynamic Range 10 (HDR10), Hybrid Log-Gamma (HLG) |
HDR-stöd: | Ja |
HD typ: | 4K Ultra HD |
Displayteknik: | LED |
Respons tid: | - ms |
VESA montering: | Ja |
Panelmonteringsgränssnitt: | 200 x 200 mm |
Djup (utan bas): | 81.28 mm |
Höjd (utan bas): | 749.3 mm |
Bredd (utan bas): | 1285.24 mm |
Vikt (utan bas): | 11022.29 g |
On Screen Display (OSD)-talen: | ENG, ESP, FRE |
PC-ingang (D-Sub): | Nee |
Digitalt ljud, optisk utgång: | 1 |
Typ av tuner: | Analoog & digitaal |
Digitalt signalformat: | ATSC |
Internet-TV: | Ja |
Fungerar med Amazon Alexa: | Ja |
Inbyggda ljudavkodare: | Dolby Atmos, Dolby Digital |
Ljudlägen: | Dynamic, Live, Movie, Music, Voice |
Enhanced Audio Return Channel (eARC): | Ja |
Energiförbrukning (HDR) per 1000 timmar: | - kWu |
Energiförbrukning (SDR) per 1000 timmar: | - kWu |
Enhetsbredd (med stativ): | 1285.24 mm |
Djupenhet (med stativ): | 299.72 mm |
Enhetshöjd (med stativ): | 800.1 mm |
Vikt (med stativ): | 11113.01 g |
Möjlighet att justera skärmmått: | 4:3, 14:9, 16:9, Cinerama, Zoom |
Elektronisk TV-guide: | Ja |
Audio Return Channel (ARC): | Ja |
Antal RF-portar: | 1 |
Inbyggd uppdateringsfrekvens: | 60 Hz |
Rörelseinterpolationsteknik: | Motion Rate 240 |
Hybrid Log Gamma (HLG): | Ja |
Teknik för ljudavkodning: | DTS Virtual:X, DTS-HD, Dolby Digital, Dolby Digital Plus |
Automatisk kanalsökning: | Ja |
Smarta lägen: | Energy saving, Game, Movie, PC, Smart HDR, Sports, True Game, Vivid |
LED backlight-type: | Direct-LED |
Programmeringsperiod: | 7 dag(en) |
Eco läge: | Ja |
Alternativ för fjärrkontroll: | Spraakherkenning |
Batterier: | 2x AAA |
Föräldratillsyn: | Ja |
Inbyggd Chromecast: | Ja |
Fjärrkontroll ingår: | Ja |
Wifi: | Ja |
Strömförbrukning (typiskt): | 125 W |
Fungerar med Google Assistant: | Ja |
Slaaptimer: | Ja |
Röst kontroll: | Ja |
Behöver du hjälp?
Om du behöver hjälp med Supermicro X7DCL-3 ställ en fråga nedan och andra användare kommer att svara dig
moderkort Supermicro Manualer

19 December 2024

5 December 2024

27 Oktober 2024

27 Oktober 2024

21 Oktober 2024

7 Oktober 2024

25 September 2024

24 September 2024

24 September 2024

24 September 2024
moderkort Manualer
- moderkort Asus
- moderkort Sharkoon
- moderkort Gigabyte
- moderkort Asrock
- moderkort Evga
- moderkort Intel
- moderkort MSI
- moderkort ECS
- moderkort NZXT
- moderkort Foxconn
- moderkort Advantech
- moderkort Elitegroup
- moderkort EPoX
- moderkort Biostar
Nyaste moderkort Manualer

25 Mars 2025

10 Mars 2025

12 Februari 2025

12 Februari 2025

12 Februari 2025

12 Februari 2025

12 Februari 2025

12 Februari 2025

12 Februari 2025