Sussex DBSHS Bruksanvisning

Sussex Kran DBSHS

Läs nedan 📖 manual på svenska för Sussex DBSHS (8 sidor) i kategorin Kran. Denna guide var användbar för 8 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/8

AS/NZS 3718:2005

LIC. 20081

-Ensure Maximum bench thickness is (i) 25mm.

-Standard Spindles are supplied pre-installed into basin bodies and do not need to be seperated.

-Handle holes should be between diameter to allow for spindle clearance.(ii) 33mm and 36mm

-The clearance hole for the outlet should be between (iii) 21mm and 23mm.

-In order to install the basin bodies under the bench, temporarily unscrew the top set of the basin body locknuts

(E) and basin body clamping washers (D) and set aside.

-Seperate Handle Assembly (B) prior to install.

-Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS 3500:2021

-Recommended working water pressure 300 - 500 Kpa. Maximum water temperature is 65°C

-After installation, ensure that tapware functions correctly without leaks.

-Please ensure a copy of the Installation Instructions are left with the end user for future reference.

DBS

DBSHS

Duet

Basin set

Product code

Rough-in:

Plumber note

-(A) Basin Outlet.

-(B) Handle Assembly (consisting of B1 - Handle, B2 - Spindle Adapter and B3 - Dress Ring).

-(C) Outlet O-Ring.

-(D) Basin Body Clamping washer.

-(E) Basin Body Locknut.

-(F) Phillips Head Screw.

-(G) Basin Body Assembly

-(H) Tee-piece.

-(I) Outlet Locknut

-(J) Outlet Clamping Washer

Product parts

While we aim to ensure the specifications shown are correct at time of printing, Sussex Taps reserves the right to make modifications without prior notice.

Always use the physical product for accurate measurements. Dimensions are subject to change without notice. All measurements are shown in millimetres.