Sussex DWBS165 Bruksanvisning

Sussex Kran DWBS165

Läs nedan 📖 manual på svenska för Sussex DWBS165 (8 sidor) i kategorin Kran. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/8

AS/NZS 3718:2005

LIC. 20081

-The In-wall (Masterfit) is supplied and is to be used in conjunction with this Tapware.

-Secure a nogging (i) back from the front of the stud. Attach the Wall Masterfit to the nogging. 45mm

-Ensure the Masterfit is mounted square and parallel between the Wall Studs.

-To fit correctly, the thickness of the finished Wall coverings is calculated between 20mm and 35mm (ii)

-If the wall coverings and Tap Seat Body do not sit within the range specified. Please contact manufacturer .

-Tapware is to be installed by a Licensed Plumber in accordance with AS/NZS 3500:2021

-Recommended working water pressure 300 - 500 Kpa. Maximum water temperature is 65°C

-After installation, ensure that tapware functions correctly without leaks.

-Please ensure a copy of the Installation Instructions are left with the end user for future reference.

DWBS165

DWBS200

DBS165

DBS200

Duet

Wall basin/bath set

Product code

Rough-in:

Plumber note

-(A) Handle Assembly (consisting of A1 - Handle, A2 - Spindle Adapter and A3 - Dress Ring).

-(B) Locknut.

-(C) Fibre Washer.

-(D) 90mm Spindle.

-(E) Wall Outlet

-(F) Set Screw

-(G) Dress Ring (for Outlet)

-(H) Supply Post

-(I) Spindle Sizing Gage

Product parts

While we aim to ensure the specifications shown are correct at time of printing, Sussex Taps reserves the right to make modifications without prior notice.

Always use the physical product for accurate measurements. Dimensions are subject to change without notice. All measurements are shown in millimetres.