Swann PRO-1080FLD Bruksanvisning

Swann övervakningskamera PRO-1080FLD

Läs nedan 📖 manual på svenska för Swann PRO-1080FLD (2 sidor) i kategorin övervakningskamera. Denna guide var användbar för 12 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

5 6

Limited Warranty - Terms & Conditions

Swann Communications warrants this product

against defects in workmanship and material for

a period of one (1) year from its original purchase

date. You must present your receipt as proof of

purchase for warranty validation. Any unit which

proves defective during the stated period will

be repaired without charge for parts or labour

or replaced at the sole discretion of Swann. The

end user is responsible for all freight charges in-

curred to send the product to Swann’s repair cen-

tres. The end user is responsible for all shipping

costs incurred when shipping from and to any

country other than the country of origin.

The warranty does not cover any incidental, ac-

cidental or consequential damages arising from

the use of or the inability to use this product. Any

costs associated with the fitting or removal of this

product by a tradesman or other person or any

other costs associated with its use are the re-

sponsibility of the end user. This warranty applies

to the original purchaser of the product only and

is not transferable to any third party. Unauthor-

ized end user or third party modifications to any

component will render all warranties void. By law

some countries do not allow limitations on certain

exclusions in this warranty. Where applicable by

local laws, regulations and legal rights will take

precedence.

For Australia: Our goods come with guarantees

which cannot be excluded under Australian Con-

sumer Law. You are entitled to a replacement

or refund for a major failure and for compensa-

tion for any other reasonably foreseeable loss or

damage. You are also entitled to have the goods

repaired or replaced if the goods fail to be of ac-

ceptable quality.

M1080FLDCAM_030516E | © Swann 2016

FCC Verification

This equipment has been tested and found to comply with the limits for Class B digital device, pursu-

ant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instructions, may cause harmful

interference to radio or television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna

• Increase the separation between the equipment and the receiver

• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-

nected

• Consult the dealer or an experienced radio/TV technician for help

These devices comply with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) These devices may not cause harmful interference.

(2) These devices must accept any interference received, including interference that may cause unde-

sired operation.

HD Dome

Security Camera

For use with Swann 1080P HD DVRs

EN INSTRUCTION MANUAL

Helpdesk/Technical Support

Technical Support E-mail: tech@swann.com

Telephone Helpdesk

USA 1800 627 2799

AUSTRALIA 1800 788 210

NEW ZEALAND 0800 479 266

UK 0808 168 9031

Tell us what you think!

We are constantly working to improve the quality of our documentation, and we would appreciate

your feedback. You can give us your feedback by clicking here to complete a short survey.

Video & Audio

Output

1 2 3 4

Congratulations on your purchase of this HD

Dome Security Camera.

• -Use the On-Screen Display (OSD) control

ler & built-in software to customize the

camera settings including color, bright-

ness & wide dynamic range for the best

video quality every time

• This camera can be used in combination

with other analog surveillance technolo-

gy including AHD, TVI, CVI from Swann &

other brands. It’s the perfect addition if you

already have a recording solution (DVR) &

need extra cameras

• -The camera joystick is used to set the sig

nal modes for the camera. Hold for 2 sec-

onds; Up for Analog, Left for AHD, Right for

TVI and Down for CVI.

Important note: All jurisdictions have specific

laws and regulations relating to the use of cam-

eras. Before using any camera for any purpose,

it is the buyer’s responsibility to be aware of all

applicable laws and regulations that prohibit or

limit the use of cameras and to comply with the

applicable laws and regulations.

Warning: Modifications not approved by the party

responsible for compliance could void user’s au-

thority to operate the equipment.

Important safety instructions

1) Make sure product is fixed correctly and stable

if fastened in place.

2) Do not operate if wires and terminals are ex-

posed.

Introduction Choosing a location for your Camera

This camera has an on-screen configuration menu to

configure various image settings as they apply to the

camera and the scene that you wish to view.

1) You should endeavor to set the camera up close

to the area you wish to view before you install the

camera so that you have access to the joystick and

can adjust the image settings.

2) What you want to monitor and where you’ll get the

best view of it.

3) How you’re going to connect the camera to your

monitoring system; you should plan the route from

the recorder to each camera

4) How to keep the camera out of harm’s way. It’s

recommended to mount your cameras in an elevated

position to prevent easy access.

5) Place your camera as close to the area of interest

as practicable. The best position is from about 3-4m

(9-13ft) above looking slightly down.

6) Although the sky looks nice when you look at the

live view from your camera, it is an unlikely direction

for an offender to approach from. Keep the camera

pointed down away from the sky or ceiling. This will

also minimize glare from lighting affecting the image.

7) Think about the most likely way a potential

offender may approach your home and position your

cameras to give you the best coverage of these areas.

8) The camera’s casing is resistant to water, different

weather conditions and tampering. However, the

cable and connectors are vulnerable and require

protection.

9) Even though the camera is weather and water-

resistant, prolonged exposure to adverse weather

conditions such as sunlight or excessive moisture,

may eventually damage the internal components of

the camera and adversely affect its performance.

Connecting your Camera Mounting your Camera

Connect the video & audio

output and DC power

connection on the camera

to the corresponding

connections on the video,

audio & power cable.

Connect the video (and audio if available)

connection on the other end of the cable

to a video (and audio) input on the DVR.

Connect the power

adapter to the cable

power socket and then to

a spare wall socket.

For multi-camera packs, use a

power splitter cable (if included).

Twist the video connection

to lock it in place.

The camera can be mounted onto a flat, vertical or

horizontal surface using the supplied mounting

screws. Materials such as hardwood, brick or

masonry are ideal. You can mount the camera onto

a metal surface, but you’ll need to supply your own

mounting hardware.

To mount the camera:

• Loosen the 2 hex screws (T6H) on the base of

the camera mount. The mounting bracket will

come away from the dome assembly

• If you’re mounting to a wooden surface, screw

the bracket directly to the surface

• When mounting to a masonry surface, you’ll

need to use the included wall plugs

Aiming the camera:

• Gently loosen the 2 hex screws (T6H) located at

the base of the camera

• The gimbal mount can be rotated left or right

• The camera can be aimed in almost any

direction from wherever you choose to mount

it. After you’ve finished adjusting the viewing

angle, tighten each screw to lock the camera’s

position in place

Positioning the cables:

• When running the cable, try to avoid bending it

at sharp angles

• Avoid positioning the cable near live electrical

wiring as electrical current generates a

magnetic field which can interfere with the

signal from your camera

PTZ

7 5 3 1

8 6 4 2

eSATA

HDMI LAN & USB B A D C 12V

VGAVIDEO IN AUDIO O UT

AUDIO IN

Video, Audio &

Power Cable

Joystick

The joystick is used

to set the signal

from the camera.

Produktspecifikationer

Varumärke:	Swann
Kategori:	övervakningskamera
Modell:	PRO-1080FLD

Behöver du hjälp?

Om du behöver hjälp med Swann PRO-1080FLD ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

övervakningskamera Swann Manualer

Swann SWNHD-866MSD Bruksanvisning

3 Oktober 2024

Swann Pro DVR8-4000 Bruksanvisning

16 September 2024

Swann SW312-HMD-CA Bruksanvisning

16 September 2024

Swann PRO-A851 Bruksanvisning

15 September 2024

Swann DVR4-1000 Bruksanvisning

9 September 2024

Swann PRO-760 Bruksanvisning

9 September 2024

Swann SW231-WMX Bruksanvisning

9 September 2024

Swann ADS-466 Bruksanvisning

8 September 2024

Swann Enforcer SWPRO-4KMQB Bruksanvisning

6 September 2024

Swann SWVID-PENBL4 Bruksanvisning

2 September 2024

övervakningskamera Manualer

Nyaste övervakningskamera Manualer

Philips B120E Bruksanvisning

16 Januari 2025

Dahua Technology Pro IPC-HDPW5442G-Z Bruksanvisning

10 Januari 2025

Hikvision DS-2CE59U1T-AVPIT3ZF Bruksanvisning

8 Januari 2025

Hikvision IDS-2CD7526G0-IZHSY Bruksanvisning

8 Januari 2025

Hikvision DS-2CD2163G0-I(S) Bruksanvisning

8 Januari 2025

Hikvision DS-2CD2H83G1-IZS Bruksanvisning

8 Januari 2025

Speco Technologies O5LB1 Bruksanvisning

8 Januari 2025

ZKTeco AntarVis 2.0 Bruksanvisning

8 Januari 2025

Speco Technologies O2P30X Bruksanvisning

8 Januari 2025

TP Link InSight S345ZI Bruksanvisning

8 Januari 2025