Sylvania 6432TE Bruksanvisning

Sylvania Tv 6432TE

Läs nedan 📖 manual på svenska för Sylvania 6432TE (8 sidor) i kategorin Tv. Denna guide var användbar för 11 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/8

This TV can receive C1 and C2 Caption and Text.

CAPTION MODE

1) Closed Caption Characters can be displayed on the TV screen only when the received broad-

cast signal contains Caption Signals.

2) Paint-on mode: Displays input characters on the screen immediately.

Pop-on mode: Once characters are stored in memory, they are displayed all at once.

Roll-up mode: Displays the characters continuously by scrolling (max. 4 lines)

Note: If CAPTION C1 or C2 is selected but a Closed Caption signal is not included, characters

will not be displayed.

TEXT MODE

1) Displays the text on the screen by scrolling (max. 7 lines)

2) If the received broadcast signal does not contain caption or text signals, no change will occur.

Notes:

1) When your TV receives a special effects playback signal (i.e., Search, Slow and Still) from a

VCR’s video output channel (CH3 or CH4), your TV may not display the correct caption or

text.

2) Captions and texts may not match the TV voice exactly.

3) Interference may cause the closed caption system not to function properly.

4) The caption or text characters will not be displayed while the menu display or functions dis-

play is shown.

5) If you see this screen:

If your TV displays a black box on the screen, this means that your TV is set to TEXT mode. To

clear screen, select CAPTION C1, C2 or CAPTION [OFF].

ANTENNA/CABLE CONNECTIONS

PRECAUTIONS

●Place your TV in a room with adequate ventilation.

●Keep your TV set away from sources of direct heat, such as heat registers or direct sunlight.

●Do not place your TV on soft surfaces, such as rugs or blankets.

●Leave enough room for air to circulate around the bottom, top and back of the set.

FEATURES

●AV MEMORY (MANUAL/SPORT/NEWS/MOVIE/GAME)

●MTS/SAP Tuner

●Tinted, Bright Black Matrix Picture Tube

●181 Channel Selection- All VHF/UHF channels plus up to 125 cable channels.

●PLL Frequency Synthesized Tuning- The latest PLL frequency synthesized electronic tun-

ing system provides free and easy channel selection and lets you tune directly to any channel

using the channel number buttons (0~9 and +100-key) on the remote control.

●On-Screen Function Display

●Full-Function Remote Control

●Sleep Timer

●Closed Caption Decoder- You may view specially labeled (cc) TV programs, movies, news,

prerecorded tapes, etc. with either a dialogue caption or text display added to the program.

●Auto Shut Off Function- If there is no signal input from the antenna terminal and no user

operation for 15 minutes, the TV will turn itself off automatically.

●V-CHIP- Enables parents to prevent their children from watching inappropriate material on TV.

●S-VIDEO Input- Allows you to get better picture detail and clarity for the playback of S-VHS

VCR tapes or Video Discs.

●Front / Rear AV Input

●Component VIDEO Input

●Rear Audio Output

Date of Purchase

Dealer Purchase from

Dealer Address

Dealer Phone No.

Model No.

Serial No.

The serial number of this product may be found on the back of the TV. No others have the same

serial number as yours. You should record the number and other vital information here and retain

this book as a permanent record of your purchase to aid identification in case of theft.

CLOSED CAPTION

UHF

Antenna

(Not supplied)

VHF

Antenna

(Not supplied)

VHF/UHF Combiner

(Not supplied)

VHF/UHF

Combination Antenna

(Not supplied)

OR OR

ANT. IN

OUT IN

75-ohm

Coaxial Cable

From Cable System

or Satellite Antenna

75-ohm

Coaxial Cable

CATV Box *

or Satellite Box

(Not supplied)

*Some cable TV systems use scrambled signals and

require a special converter to receive these channels.

Consult your local cable company.

Note to CATV system installer:

This reminder is provided to call the CATV system installer's attention to Article 820-

40 of the NEC that provides guidelines for proper grounding and, in particular, speci-

fies that the cable ground shall be connected to the grounding system of the building

as close to the point of cable entry as practical.

FCC WARNING- This equip-

ment may generate or use radio

frequency energy. Changes or

modifications to this equipment

may cause harmful interference

unless the modifications are

expressly approved in the

instruction manual. The user

could lose the authority to oper-

ate this equipment if an unau-

thorized change or modification

is made.

IF YOU NEED ADDITIONAL ASSISTANCE FOR SET-UP OR OPERATING

AFTER READING OWNER’S MANUAL, PLEASE CALL TOLL FREE

1-800-968-3429 OR VISIT OUR WEB SITE AT http://www.funai-corp.com

Owner’s

Manual

1EMN20187 Printed in Thailand

L2901UB * * * * *

32 INCH

COLOR TELEVISION

6432TE

CAUTION: TO PREVENT ELECTRIC

SHOCK, MATCH WIDE BLADE OF PLUG

TO WIDE SLOT AND FULLY INSERT.

MISE EN GARDE:

POUR ÉVITER LES

RISQUES

D’ÉLECTROCUTION

, INTRODUIRE LA

LAME LA PLUS LARGE DE LA FICHE DANS

LA BORNE CORRESPONDANTE DE LA

PRISE ET POUSSER JUSQU’AU FOND.

SYLVANIA

LIMITED WARRANTY

FUNAI CORP. will repair this SYLVANIA product, free of charge in the USA in the event of defect in materials or workman-

ship as follows:

DURATION:

PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from

the date of original retail purchase. Two (2) years for Picture Tube. Certain parts are excluded

from this warranty.

LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date

of original retail purchase.

LIMITS AND EXCLUSIONS:

THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT

OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE

PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY.

This warranty shall not be extended to any other person or transferee.

This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or

if service was attempted by an unauthorized service center. This SYLVANIA Limited warranty does not apply to any

product not purchased and used in the United States.

This warranty only covers failures due to defects in material or workmanship which occurs during normal use. It does

not cover damage which occurs in shipment, failures which are caused by repairs, alterations or product not supplied

by FUNAI CORP., or damage which results from accident, misuse, abuse, mishandling, misapplication, alteration,

faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product or damage

which results from fire, flood, lightning or other acts of God.

THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE

CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS.

FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY

GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE

USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL

OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF

FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS

FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN

THE UNITED STATES.

ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY A FUNAI AUTHORIZED SER-

VICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO A FUNAI AUTHO-

RIZED SERVICE FACILITY.

THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT.

IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIRS

COSTS WILL BE CHARGED.

IMPORTANT:

THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT

VA RY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO

OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP.

ATTENTION:

FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT

WITHOUT PRIOR NOTICE.

To locate your nearest SYLVANIA Authorized Service Center or general service procedure,

please call 1-800-968-3429 or write to the following:

FUNAI CORPORATION, INC.

SERVICE CENTER

19900 Van Ness Avenue, Torrance, CA 90501

Tel :1-800-968-3429

http://www.funai-corp.com

Head Office: 100 North Street, Teterboro, NJ 07608

PLEASE DO NOT SHIP YOUR UNIT TO THE TETERBORO ADDRESS.

WARNING:

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLI-

ANCE TO RAIN OR MOISTURE.

IMPORTANT SAFEGUARDS

CAUTION: TO REDUCE THE RISK OF ELECTRIC

SHOCK, DO NOT REMOVE COVER (OR BACK) NO

USER SERVICEABLE PARTS INSIDE. REFER SER-

VICING TO QUALIFIED SERVICE PERSONNEL.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

THIS SYMBOL INDICATES THAT DAN-

GEROUS VOLTAGE CONSTITUTING A

RISK OF ELECTRIC SHOCK IS PRE-

SENT WITHIN THIS UNIT.

THIS SYMBOL INDICATES THAT

THERE ARE IMPORTANT OPERATING

AND MAINTENANCE INSTRUCTIONS

IN THE LITERATURE ACCOMPANYING

THE APPLIANCE.

The important note is located on the rear of the cabinet.

1. Read instructions-All the safety and operating instruc-

tions should be read before the appliance is operated.

2. Retain Instructions-The safety and operating instruc-

tions should be retained for future reference.

3. Heed Warnings-All warnings on the appliance and in

the operating instructions should be adhered to.

4. Follow Instructions-All operating and use instructions

should be followed.

5. Cleaning-Unplug TV from the wall outlet before clean-

ing. Do not use liquid cleaners or aerosol cleaners. Use

a damp cloth for cleaning.

EXCEPTION: A product that is meant for uninterrupt-

ed service and, that for some specific reason, such as

the possibility of the loss of an authorization code for a

CATV converter, is not intended to be unplugged by

the user for cleaning or any other purpose, may

exclude the reference to unplugging the appliance in

the cleaning description otherwise required in item 5.

6. Attachments-Do not use attachments not recommended

by the TV manufacturer as they may cause hazards.

7. Water and Moisture-Do not use this TV near water, for

example, near a bath tub, wash bowl, kitchen sink, or

laundry tub, in a wet basement, or near a swimming

pool, and the like.

8. Accessories-Do not place this TV on an unstable cart,

stand, tripod, bracket, or table. The TV may fall, caus-

ing serious injury to someone, and serious damage to

the appliance. Use only with a cart, stand, tripod,

bracket, or table recommended by the manufacturer, or

sold with the TV.

Any mounting of the appliance should follow the man-

ufacturer’s instructions and should

use a mounting accessory recom-

mended by the manufacturer. An

appliance and cart combination

should be moved with care. Quick

stops, excessive force, and uneven

surfaces may cause the appliance

and cart combination to overturn.

AMEUBLES- Cet appareil ne doit être placé que sur un

meuble (avec ou sans roulettes) recommandé par le

fabricant. Si vous l’installez sur

un meuble à roulettes, déplacez

les deux ensembles avec précau-

tion. Un arrêt brusque, l’utilisation

d’une force excessive et des sur-

faces irrégulières risquent de

déstabiliser l’ensemble et de le

renverser.

9. Ventilation-Slots and openings in the cabinet and the

back or bottom are provided for ventilation and to

ensure reliable operation of the TV and to protect it

from overheating, these openings must not be blocked

or covered. The openings should never be blocked by

placing the TV on a bed, sofa, rug, or other similar sur-

face. This TV should never be placed near or over a

radiator or heat register. This TV should not be placed

in a built-in installation such as a bookcase or rack

unless proper ventilation is provided or the manufac-

turer’s instructions have been adhered to .

10. Power Sources-This TV should be operated only from

the type of power source indicated on the marking

label. If you are not sure of the type of power supply to

your home, consult your appliance dealer or local

power company. For TVs intended to operate from bat-

tery power, or other sources, refer to the operating

instructions.

11. Grounding or Polarization-This TV is equipped with a

polarized alternating-current line plug(a plug having

one blade wider than the other). This plug will fit into

the power outlet only one way. This is a safety feature.

If you are unable to insert the plug fully into the outlet,

try reversing the plug. If the plug should still fail to fit,

contact your electrician to replace your obsolete outlet.

Do not defeat the safety purpose of the polarized plug.

PORTABLE CART WARNING

S3126A

12. Power-Cord Protection-Power-supply cords should be

routed so that they are not likely to be walked on or

pinched by items placed upon or against them, paying

particular attention to cords at plugs, convenience

receptacles, and the point where they exit from the

appliance.

13. Outdoor Antenna grounding-If an outside antenna or

cable system is connected to the TV, be sure the anten-

na or cable system is grounded so as to provide some

protection against voltage surges and built-up static

charges. Article 810 of the National Electrical Code,

ANSI/NFPA No. 70, provides information with respect

to proper grounding of the mast and supporting struc-

ture, grounding of the lead-in wire to an antenna dis-

charge unit, size of grounding conductors, location of

antenna-discharge unit, connection to grounding elec-

trodes, and requirements for the grounding electrode.

(Fig. A)

14. Lightning-For added protection for this TV receiver

during a lightning storm, or when it is left unattended

and unused for long periods of time, unplug it from the

wall outlet and disconnect the antenna or cable system.

This will prevent damage to the TV due to lightning

and power-line surges.

15. Power Lines-An outside antenna system should not be

located in the vicinity of overhead power lines or other

electric light of power circuits, or where it can fall into

such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep

from touching such power lines or circuits as contact

with them might be fatal.

16. Overloading-Do not overload wall outlets and extension

cords as this can result in a risk of fire or electric shock.

17. Object and Liquid Entry-Never push objects of any

kind into this TV through openings as they may touch

dangerous voltage points or short out parts that could

result in a fire or electric shock. Never spill liquid of

any kind on the TV.

18. Servicing-Do not attempt to service this TV yourself as

opening or removing covers may expose you to dan-

gerous voltage or other hazards. Refer all servicing to

qualified service personnel.

19. Damage Requiring Service-Unplug this TV from the

wall outlet and refer servicing to qualified service per-

sonnel under the following conditions:

a. When the power supply cord or plug is damaged or

frayed.

b. If liquid has been spilled, or objects have fallen into

the TV.

c. If the TV has been exposed to rain or water.

d. If the TV does not operate normally by following the

operating instructions. Adjust only those controls that

are covered by the operating instructions, as improper

adjustment of other controls may result in damage and

will often require extensive work by a qualified techni-

cian to restore the TV to its normal operation.

e. If the TV has been dropped or damaged in any way.

f. When the TV exhibits a distinct change in perfor-

mance-this indicates a need for service.

20. Replacement Parts-When replacement parts are

required, be sure the service technician uses replace-

ment parts specified by the manufacturer that have the

same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, injury to

persons or other hazards.

21. Safety Check-Upon completion of any service or

repairs to this TV, ask the service technician to perform

routine safety checks to determine that the TV is in

proper operating condition.

22. Heat-This TV product should be situated away from

heat sources such as radiators, heat registers, stoves, or

other products (including amplifiers) that produce heat.

FIGURE A

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

E L E C T R I C

SE R V I C E

E Q UI P ME N T

G R O UN D

CLAM P

NE C - NAT IONAL E LECT RICAL CO DE POWE R SE R V ICE G ROUNDI NG

E LE C T RODE SYST E M

(NE C ART 25 0 , PA R T H)

S 2 8 9 8 A

GRO UND CLA MPS

GRO UNDING CO NDUCTO R S

(NE C SE CTION 81 0 -2 1)

A NT E N NA

DI SCHARG E U NIT

(NE C SE CTION 81 0 -2 0)

A NT E N NA

LE A D IN

W IR E

OPERATING CONTROLS AND FUNCTIONS

- FRONT PANEL -

1. VIDEO (INPUT) jack- Connect to the

video output jack of a video camera or VCR.

2. AUDIO (INPUT) L/R jacks- Connect to

the left/right channel audio output jacks of

a video camera or VCR.

Note: The AUDIO L jack is for mono

input. The sound is heard from both speak-

ers. Use this jack for connecting monaural

audio equipment.

3. MENU button- Press to display the menu

on the TV screen.

4. VOLUME (VOL) ▲ ▼ / buttons- Press to

control the volume level.

Press to determine the setting mode from

the menu on the TV screen. (only the VOL

▲ button)

Press to select or adjust from a particular

menu. (for example: Language Selection,

Channel Presetting, Closed Caption Selection,

Picture Adjustment, V-CHIP Set Up)

5. CHANNEL (CH) ▲ ▼ / buttons- Press to

select memorized channel.

Press to select the setting mode from the

menu on the TV screen.

Press to select item you want to adjust in

the picture control mode.

6. POWER button- Press to turn the TV ON

and OFF.

7. Infrared Sensor Window- Receives the

infrared control signals from the remote

control unit.

8. Channel number buttons- Press two digits

to directly access the desired channel.

Remember to press a “0” before a single

digit channel.

+100 button- Press to select cable channels

higher than 99.

9. MUTE button- Press to turn off the sound

portion of the TV program. (Volume level

display turns LIGHT RED from LIGHT

BLUE.)

Press button again or press the VOL(ume)

▲ ▼ or button to restore sound.

10.INPUT SELECT button- Press to select TV

or the external input (VIDEO1, VIDEO2, or

COMPONENT) mode.

(See USING AUDIO/VIDEO INPUT JACKS.)

11.CHANNEL RETURN button- Press to go

back to the previously viewed channel. For

example, pressing button once will change

channel display from CH 3 (present chan-

nel) to CH 10 (previously viewed channel),

and pressing it a second time will return

from CH 10 to CH 3.

12.DISPLAY button- Press to display the

channel number on the screen. If you press

it again, the channel number will disappear.

13.SLEEP button- Press to display the sleep

timer and start the function. The shut off

time can be determined by the number of

times you press the button. (0, 10, 20, 30,

..90, 0 minutes)

14.GAME button- Press to set Game mode

and external input mode at the same time.

Press the INPUT SELECT button to exit .

15.AC cord- Connect to a standard AC outlet

(120V/60Hz).

Note: Unwrap the AC cord completely

from the backcover before plugging the

cord into an AC outlet.

16.AUDIO OUTPUT L/R jacks- Connect to

the audio input of an external amplifier or

decorder.

17.

S-VIDEO INPUT jack- Connect to the

S-VIDEO output jack of a video camera or

VCR using the S-VIDEO cable (not supplied).

Note: The S-VIDEO jack is given priority

over the VIDEO jack on the rear panel.

18. -COMPONENT AUDIO INPUT jacks

Connect to the left/right channel audio out-

put jacks of DVD player when using the

COMPONENT VIDEO INPUT jacks.

19. -COMPONENT VIDEO INPUT jacks

Connect to the Component Video output

jacks of DVD player.

20.ANT(enna). IN jack- Connect to an anten-

na, cable system or satellite system.

- REMOTE CONTROL -

VIDEO L-AUDIO-R

MENU VOLUME CHANNEL POWER

4 5 6 71 2 3

16 1721 1918 2015

1 2 3

4 5 6

7 8 9

0 +100

DISPLAY

VOL

SLEEP

CHANNEL

RETURN

INPUT

SELECT

MUTE

GAME

POWER

INSTALLING THE BATTERIES

1) Slide the battery compartment cover back

on the remote unit.

2) Insert 2 “AA” penlight batteries into bat-

tery compartment in the direction as indi-

cated by the polarity (+ / -) markings.

Batteries installed with incorrect polarity

may damage the remote unit.

3) Replace the cover.

USING AUDIO/VIDEO INPUT JACKS

When you use the AUDIO/VIDEO input jacks

or COMPONENT VIDEO INPUT jacks,

select “VIDEO1” or “VIDEO2” or “COMPO-

NENT” mode by pressing the INPUT

SELECT button on the remote control.

• To use the VIDEO jack on the rear of the

TV, select “VIDEO1”.

• To use the jack on the front of the TV, select

“VIDEO2”.

•

To use the COMPONENT VIDEO INPUT jacks

on the rear of the TV, select “COMPONENT”.

Notes:

• You may also set Game mode by pressing

the GAME button on the remote control.

“GAME” appears on the TV screen. In this

case, connect the external source to the

AUDIO/VIDEO jacks on the front panel.

(See PICTURE ADJUSTMENT.)

• When you use the S-VIDEO connection,

S-VIDEO jack is given priority over the

VIDEO (Rear) jack.

SYMBOLE D'AVERTISSEMENT POUR

LES COMPOSANTES

APPAREIL ET MEUBLE A ROULETTES

S3126A

- REAR PANEL -

[-] BRIGHT [+] [-] CONTRAST [+] [-] COLOR [+] [-] TINT [+] [-] SHARPNESS [+]

PREPARATION FOR USE

WATCHING A TV PROGRAM

1) Press the POWER button to turn on the TV.

2) Select the desired channel with the CH(annel) ▲ or button.▼

3) Adjust the volume to the desired listening level using the VOL(ume) ▲ or button.▼

4) Adjust picture controls for a natural looking image. (See PICTURE ADJUSTMENT.)

SETTING THE SLEEP TIMER

The sleep timer function allows you to shut off the power automatically after

a set time period.

1) Press the POWER button to turn on the TV and press the SLEEP button

on the remote control .

2) You may change the sleep time by pressing the SLEEP button on the remote

control repeatedly. The timer can be set up to 90 minutes. 10 minutes each

time the SLEEP button is pressed. (The timer display counts

up and sleep timer can be displayed on the screen when you

press the SLEEP button on remote control.)

Note: When you disconnect the unit from the AC outlet or

when you have a power failure, the sleep time will be lost.

CLOSED CAPTION SELECTION

SLEEP 10

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [ C1]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [ C2]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [ T1]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [ T2]

TV SOUND [MAIN]

: Press the VOL(ume) ▲ ▼ or button.

BRIGHT

Adjust until the darkest parts of the picture are

as bright as you prefer.

[+] : increase brightness [-] : decrease brightness

CONTRAST

Adjust to increase or decrease contrast.

[+] : increase contrast [ - ] : decrease contrast

COLOR

Adjust to be brilliant or pale color.

[+] : be brilliant color [ - ] : be pale color

TINT

Adjust to obtain natural skin tones.

[+] : greenish tone [ - ] : reddish tone

SHARPNESS

Adjust to detail in the picture.

[+]:increase sharpness [-]:decrease sharpness

Notes:

●“+” is achieved by pressing the VOL(ume)

▲ button and “-” by pressing the

VOL(ume)▼ button.

●In the above steps, the picture adjustment

display will disappear from the TV screen

automatically after about 10 seconds if you

do not press any buttons. Press the MENU

and VOL(ume) ▲ button so that

“PICTURE” is selected. Press the CH(annel)

▲ ▼ or button repeatedly until the display

returns to the screen.

●If you adjust another picture control after

you set the Game mode to [ON], the Game

mode will be set to [OFF] automatically.

[USING THE GAME BUTTON]

You may also set Game mode and external

input mode at the same time by pressing the

GAME button on the remote control. “GAME”

appears on the TV screen.

●To exit Game mode and external input

mode, press the INPUT SELECT button.

●To cancel the Game mode only, follow the

steps in PICTURE ADJUSTMENT or AV

MEMORY. In this case, “VIDEO2” (external

input mode) instead of “GAME” appears on

the TV screen.

●If you press the GAME button when the TV

is off, the TV turns on and will be in Game

mode and external input mode automatically.

PICTURE ADJUSTMENT

1) Press the MENU button so that the menu display appears on the TV screen.

2) Press the VOL(ume) button so that “PICTURE” is selected.▲

3) Press the CH(annel) ▲or ▼ button to select “MANUAL”. Then, press the VOL(ume) ▲ button.

4) Select the feature you wish to adjust with the CH(annel) button and adjust it with the▲ or ▼

VOL(ume) or button.▲ ▼

: Press the CH(annel) ▲ or button.▼

LANGUAGE SELECTION

If you want to change the language of the on-screen menu, follow the proce-

dure below.

1) Connect the power cord to a standard AC outlet.

Note: If some digits appear in the corner of the screen,

press the POWER button without unplugging the power cord.

2) Press the POWER button to turn on the TV.

3) Press the MENU button so that the menu display appears

on the TV screen.

4) Press the CH(annel) button to point to “[ENG]”.▲ or ▼

5) Select “ENG(lish)”, “ESP(añol)” or “FRA(nçais)” by using

the VOL(ume) ▲ or button.▼

6) Press the MENU button to exit the menu.

CHANNEL PRESETTING

To preset a channel or to change a preset channel, follow the procedure below.

1) Press the POWER button to turn on the TV.

2) Press the MENU button so that the menu display appears

on the TV screen.

3) Press the CH(annel) button to point to “CHANNEL SET”, then▲ or ▼

press the VOL(ume) ▲ button.

4) Press the CH(annel) button to point to “AUTO PRESET CH”,▲ or ▼

then press the VOL(ume) ▲ button.

The tuner scans and memorizes all active channels in your area.

●The TV distinguishes between standard TV channels and cable (CATV)

channels.

●When AUTO PRESET CH action is completed, the lowest memorized

channel reappears on the screen.

●When you press the CH(annel) ▲ ▼ or button after selecting “AUTO PRESET CH”,

the tuner will stop at the memorized channels only.

●The TV may recognize TV channels to be CATV channels by receiving conditions. In this case,

try AUTO PRESET CH action again in the fine receiving conditions.

●When AUTO PRESET CH is activated where there is no TV signal input, “NO TV SIGNALS”

will appear on the display after the completion of channel scanning.

[ADD/DELETE FUNCTION]

1) Press the MENU button so that the menu display appears on the TV

screen.

2) Press the CH(annel) button to point to “CHANNEL SET”, then▲ or ▼

press the VOL(ume) ▲ button.

3) Press the VOL(ume) button so that “ADD/DELETE” is selected.▲

4) Use the CH(annel) button to select the channel you wish to put▲ or ▼

into memory or to erase from memory.

Note: The menu will disappear automatically in about 10 seconds.

Perform ADD/DELETE function while this display appears on the screen.

●Press the VOL(ume) button to light up the channel number ▲ or ▼

in LIGHT BLUE if you wish to add the channel into memory.

●Press the VOL(ume) button to light up the channel number ▲ or ▼

in LIGHT RED if you wish to erase the channel from memory.

5) Press the MENU button to exit the menu.

MTS (Multi-Channel Television Sound) SYSTEM

You can listen to a program in MTS stereo by following the steps below.

[To Select STEREO, MONO or SAP in Stereo broadcast]

1) Press the MENU button so that the menu display appears on the TV screen.

2) Press the CH(annel) button to point to “TV SOUND”. ▲ or ▼

3) Press the VOL(ume) button to select your desired stereo mode. ▲ or ▼

([MAIN], [MONO] or [SAP].)

RESUME FUNCTION

If the power fails or is disconnected while the TV is powered on, the TV will turn on automatical-

ly when the power resumes.

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

ADD/DELETE

AUTO PRESET CH

ADD/DELETE

AUTO PRESET CH

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

OPERATIONS

Type of

broadcast

Regular -None-

Stereo

broadcast STEREO

SAP

Selection MAIN MONO SAP

-None- -None-

MONO STEREO

SAPMAIN MAIN

To show the status, press the DISPLAY

button on the remote control.

SAP: Second Audio Program, which

means your program can also be

received in a second language or

sometimes a radio station.

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MAIN]

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [MONO]

PICTURE

CHANNEL SET

[ENG] / ESP / FRA

V-CHIP SET UP

CAPTION [OFF]

TV SOUND [SAP]

: Press the VOL(ume) ▲ or button.▼

To cancel the sleep timer:

Press the SLEEP button repeated-

ly until “SLEEP 0” is displayed.

You may view specially labeled (cc) TV pro-

grams, movies, news and prerecorded tapes,

etc. with either a dialogue caption or text dis-

play added to the program.

1) Press the MENU button so that the menu

display appears on the TV screen.

2) Press the CH(annel) button to point▲ or ▼

to “CAPTION”.

3) Press the VOL(ume) button to▲ or ▼

select the mode you wish.

4) When done, press the MENU button to exit

the menu.

AV MEMORY

This feature allows you to quickly adjust picture settings for MANUAL, SPORT, NEWS,

MOVIE, and GAME to match the program you are watching.

1) Press the MENU button so that the menu display appears on the TV screen.

2) Press the VOL(ume) button so that “PICTURE” is selected.▲

3) Select the item with the CH(annel) ▲ or button.▼

Note: See PICTURE ADJUSTMENT to manually customize the picture.

MANUAL NEWSSPORT MOVIE GAME

: Press the CH(annel) ▲ or ▼ button.

Produktspecifikationer

Varumärke:	Sylvania
Kategori:	Tv
Modell:	6432TE

Behöver du hjälp?

Om du behöver hjälp med Sylvania 6432TE ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Tv Sylvania Manualer

Sylvania 6620LDF Bruksanvisning

27 Oktober 2024

Sylvania 3819LC Bruksanvisning

5 September 2024

Sylvania 6419TD Bruksanvisning

4 September 2024

Sylvania 6419CTA Bruksanvisning

4 September 2024

Sylvania 6842PE M Bruksanvisning

4 September 2024

Sylvania KVS600A Bruksanvisning

3 September 2024

Sylvania 6413TEY Bruksanvisning

3 September 2024

Sylvania 6432TE Bruksanvisning

3 September 2024

Sylvania 6719DC Bruksanvisning

3 September 2024

Sylvania 6242CVC Bruksanvisning

3 September 2024

Tv Manualer

Nyaste Tv Manualer

Finlux 48FFA4110 Bruksanvisning

27 Oktober 2024

Continental Edison CELED55120B2 Bruksanvisning

27 Oktober 2024

Bang And Olufsen Beovision 7-55 Bruksanvisning

27 Oktober 2024

Finlux CT1412T DVD Bruksanvisning

27 Oktober 2024

Xoro HTC 2240 HD Bruksanvisning

27 Oktober 2024

Sharp LC-32LX705 Bruksanvisning

27 Oktober 2024

Sharp 65BJ5K Bruksanvisning

27 Oktober 2024

Daitsu DL32 Bruksanvisning

27 Oktober 2024

Nevir NVR-7200-19SD-B Bruksanvisning

27 Oktober 2024

GoGEN TVU50V47FE Bruksanvisning

27 Oktober 2024