Tascam MiNiSTUDIO Creator US-42B Bruksanvisning

Tascam Inte kategoriserad MiNiSTUDIO Creator US-42B

Läs nedan 📖 manual på svenska för Tascam MiNiSTUDIO Creator US-42B (32 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 17 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/32

OWNER’S MANUAL

D01377020C

MiNiSTUDIO CREATOR

US-42B

2 TASCAM MiNiSTUDIO CREATOR

IMPORTANT SAFETY INSTRUCTIONS

INFORMATION TO THE USER

This equipment has been tested and found to comply

with the limits for a Class B digital device, pursuant to

Part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful inter-

ference in a residential installation. This equipment

generates, uses, and can radiate radio frequency

energy and, if not installed and used in accordance

with the instruction manual, may cause harmful

interference to radio communications. However, there

is no guarantee that interference will not occur in a

particular installation. If this equipment does cause

harmful interference to radio or television reception,

which can be determined by turning the equipment

off and on, the user is encouraged to try to correct

the interference by one or more of the following

measures.

a) Reorient or relocate the receiving antenna.

b) Increase the separation between the equipment

and receiver.

c) Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

d) Consult the dealer or an experienced radio/TV

technician for help.

CAUTION

Changes or modifications to this equipment not

expressly approved by TEAC CORPORATION for

compliance could void the user’s authority to operate

this equipment.

For U.S.A.

For Canada

THIS CLASS B DIGITAL APPARATUS COMPLIES WITH

CANADIAN ICES-003.

CET APPAREIL NUMÉRIQUE DE LA CLASSE B EST

CONFORME À LA NORME NMB-003 DU CANADA.

Declaration of Conformity

Responsible party: TEAC AMERICA, INC.

Address: 10410 Pioneer Blvd. Suite #1,

Santa Fe Springs, California

90670, U.S.A.

Telephone number: 1-323-726-0303

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

(1) this device may not cause harmful interference,

and (2) this device must accept any interference

received, including interference that may cause

undesired operation.

This product complies with the

European Directives request and the

other Commission Regulations.

This product complies with appli-

cable UK regulations.

Nameplate

1 Read these instructions.

2 Keep these instructions.

3 Heed all warnings.

4 Follow all instructions.

5 Do not use this apparatus near water.

6 Clean only with dry cloth.

7 Do not block any ventilation openings. Install in

accordance with the manufacturer’s instructions.

8 Do not install near any heat sources such as

radiators, heat registers, stoves, or other apparatus

(including amplifiers) that produce heat.

9 Do not defeat the safety purpose of the polarized

or grounding-type plug. A polarized plug has two

blades with one wider than the other. A grounding

type plug has two blades and a third grounding

prong. The wide blade or the third prong are

provided for your safety. If the provided plug does

not fit into your outlet, consult an electrician for

replacement of the obsolete outlet.

10 Protect the power cord from being walked on or

pinched particularly at plugs, convenience recep-

tacles, and the point where they exit from the

apparatus.

11 Only use attachments/accessories specified by the

manufacturer.

TASCAM MiNiSTUDIO CREATOR 3

12 Use only with the cart, stand,

tripod, bracket, or table

specified by the manufacturer,

or sold with the apparatus.

When a cart is used, use

caution when moving the cart/apparatus combi-

nation to avoid injury from tip-over.

13 Unplug this apparatus during lightning storms or

when unused for long periods of time.

14 Refer all servicing to qualified service personnel.

Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or

plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has

been exposed to rain or moisture, does not operate

normally, or has been dropped.

• The apparatus draws nominal non-operating

power from the AC outlet with its POWER or

STANDBY/ON switch not in the ON position.

• The mains plug is used as the disconnect device,

the disconnect device shall remain readily

operable.

• Caution should be taken when using earphones

or headphones with the product because

excessive sound pressure (volume) from

earphones or headphones can cause hearing

loss.

• If you are experiencing problems with this

product, contact TEAC for a service referral. Do

not use the product until it has been repaired.

CAUTION

• Do not expose this apparatus to drips or

splashes.

• Do not place any objects filled with liquids, such

as vases, on the apparatus.

• Do not install this apparatus in a confined space

such as a book case or similar unit.

• The apparatus should be located close enough

to the AC outlet so that you can easily grasp the

power cord plug at any time.

• If the product uses batteries (including a battery

pack or installed batteries), they should not be

exposed to sunshine, fire or excessive heat.

• CAUTION for products that use replaceable

lithium batteries: there is danger of explosion

if a battery is replaced with an incorrect type

of battery. Replace only with the same or

equivalent type.

8For European Customers

Disposal of electrical and electronic equipment

(a) All electrical and electronic equipment should be

disposed of separately from the municipal waste

stream via designated collection facilities appointed

by the government or the local authorities.

(b) By disposing of the electrical and electronic

equipment correctly, you will help save valuable

resources and prevent any potential negative

effects on human health and the environment.

serious effects on the environment and human

health as a result of the presence of hazardous

substances in electrical and electronic equipment.

(d) The crossed out wheeled dust bin

symbol indicates that electrical and

electronic equipment must be collected

and disposed of separately from

household waste.

(e) The return and collection systems are available to

the end users. For more detailed information about

disposal of old electrical and electronic equipment,

please contact your city office, waste disposal

service or the shop where you purchased the

equipment.

4 TASCAM MiNiSTUDIO CREATOR

Contents

IMPORTANT SAFETY INSTRUCTIONS .............................2

Introduction ............................................................................4

Features ....................................................................................4

Included items .......................................................................5

Conventions used in this manual 5 ...................................

Trademarks and copyrights ..............................................5

Precautions for placement and use 5 ...............................

Using the TEAC Global Site 6 ...............................................

Beware of condensation ....................................................6

Cleaning the unit ..................................................................6

Product registration ............................................................6

About TASCAM customer support service 6 .................

Broadcasting live...................................................................6

Names and functions of parts 8 ..........................................

Top panel ...........................................................................................8

Front panel ........................................................................................9

Rear panel ....................................................................................... 10

Installing the dedicated software ............................... 10

Installing the Windows software ..................................... 10

Installing the Mac software ..................................................11

Working with Gatekeeper .....................................................12

Connecting the power ..................................................... 13

When using a computer (Windows/Mac) ...................13

When using an iOS device ....................................................13

Connection illustrations .................................................. 13

Connecting with a computer ............................................ 14

Connecting iOS devices ........................................................ 14

Audio connections.................................................................... 14

Opening the Settings Panel ........................................... 15

Windows ...........................................................................................15

Mac .......................................................................................................15

Settings Panel overview .................................................. 15

Using the Settings Panel menu bar ................................15

EASY page .......................................................................................17

EXPERT page ................................................................................. 18

Driver settings for specific purposes (Windows only) ...21

Creating podcasts (Windows only) ............................. 21

Using the ducking function ........................................... 22

Notification function ........................................................22

Automatic Settings Panel and firmware update function ...22

Application Guide ..............................................................23

Windows ..........................................................................................23

macOS ...............................................................................................23

Troubleshooting ................................................................. 24

Specifications ......................................................................25

Ratings...............................................................................................25

Analog audio input ratings ..................................................25

Analog audio output ratings ..............................................25

Control input/output ratings .............................................26

Audio performance ..................................................................26

Operation requirements .................................................26

Windows ..........................................................................................26

Mac ......................................................................................................26

iOS device ....................................................................................... 26

Supported audio drivers .......................................................26

General...................................................................................27

Dimensional drawings .....................................................27

Block diagrams....................................................................28

Introduction

Thank you very much for purchasing the TASCAM

MiNiSTUDIO CREATOR.

Before using this unit, read this Owner's Manual

carefully so that you will be able to use it correctly

and enjoy working with it for many years. After you

have finished reading this manual, please keep it in a

safe place for future reference.

You can also download this Owner’s Manual from the

TEAC Global Site (https://teac-global.com/).

Before connecting this unit to a computer, you

must download and install dedicated software

on the computer.

Features

The MiNiSTUDIO series of personal audio interfaces

are designed to make Internet broadcasting of audio

performances easy.

The MiNiSTUDIO CREATOR, which is an advanced

model in the MiNiSTUDIO series, supports both live

broadcasting and production applications as well as

the simultaneous use of two mics. Users can enjoy

streaming and production with advanced features.

• Audio interface designed specifically for live

Internet broadcasting with support for not only

Windows, but also Mac and iOS

• Sound effect triggering (SOUND PAD) function,

voice effects and reverb enable many audio

performance possibilities

• Easily-operated user interface designed for

Internet broadcasting

• Two input jacks support various applications

including performances with vocals and guitar

and interview programs

• CREATOR mode is optimal for creating video

contents and music.

8Note about computer operation

If you are unsure about anything related to the basic

operation of a computer when it is mentioned in

an explanation in this manual, please refer to the

computer operation manual.

To use this unit with a computer, dedicated software

must be installed on the computer.

For details about software installation, see “Installing

the dedicated software” on page 10.

TASCAM MiNiSTUDIO CREATOR 5

Included items

This product includes the following items.

Take care when opening the package to avoid

damaging the items. Keep the box and packing

materials for transportation in the future.

Please contact the store where you purchased this

unit if any of these items are missing or have been

damaged during transportation.

• Main unit × 1 ...................................................................

• USB cable × 1 ..................................................................

• Owner’s Manual (this document) × 1 .....................

The warranty is included at the end of this manual.

Conventions used in this manual

In this manual, we use the following conventions:

• Buttons, connectors and other physical parts of

this unit are written using a bold font like this:

VOLUME knob.

• Information shown on a computer display is

written like this: “OK”.

• Additional information is provided as necessary

as tips, notes and cautions.

TIP

These are tips about how to use the unit.

NOTE

These provide additional explanations and

describe special cases.

CAUTION

Failure to follow these instructions could

result in injury, damage to equipment or lost

recording data, for example.

Trademarks and copyrights

• TASCAM and MiNiSTUDIO are registered

trademarks of TEAC Corporation.

• Microsoft and Windows are either registered

trademarks or trademarks of Microsoft

Corporation in the United States and/or other

countries.

• Apple, Mac, macOS, iPad and iPod touch are

trademarks of Apple Inc.

• Lightning is a trademark of Apple Inc.

• App Store is a service mark of Apple Inc.

• IOS is a trademark or registered trademark of

Cisco in the U.S. and other countries and is used

under license.

• ASIO is a trademark of Steinberg Media

Technologies GmbH.

• Other company names, product names and

logos in this document are the trademarks

or registered trademarks of their respective

owners.

Precautions for placement and use

• The operating temperature range of this unit is

5–35 °C.

• Do not install this unit in the following types

of locations. Doing so could make the sound

quality worse or cause malfunction.

Places with significant vibrations

Near windows or other places exposed to

direct sunlight

Near heaters or other extremely hot places

Extremely cold places

Places with bad ventilation or high humidity

Very dusty locations

• Do not place this unit on top of a power

amplifier or other device that generates heat.

6 TASCAM MiNiSTUDIO CREATOR

Using the TEAC Global Site

You can download updates for this unit from the

TEAC Global Site:

ihttps://teac-global.com/

In the TASCAM Downloads section, select the desired

language to open the Downloads website page for

that language.

Beware of condensation

If the unit is moved from a cold to a warm place,

or used after a sudden temperature change, there

is a danger of condensation; vapor in the air could

condense on the internal mechanism, making correct

operation impossible. To prevent this, or if this occurs,

let the unit sit for one or two hours at the new room

temperature before using it.

Cleaning the unit

Use a dry soft cloth to wipe the unit clean. Do not

wipe with chemical cleaning cloths, thinner, alcohol

or other chemical agents. Doing so could damage the

surface or cause discoloration.

Product registration

Customers in the USA, please visit the following

TASCAM website to register your TASCAM product

online.

https://tascam.com/us/

About TASCAM customer support

service

TASCAM products are supported and warrantied only

in their country/region of purchase.

To receive support after purchase, on the TASCAM

Distributors list page of the TEAC Global Site (https://

teac-global.com/), search for the local company or

representative for the region where you purchased

the product and contact that organization.

When making inquiries, the address (URL) of the

shop or web shop where it was purchased and the

purchase date are required.

Moreover, the warranty card and proof of purchase

might also be necessary.

Broadcasting live

8Computer preparation (installing the

dedicated software)

1. Download the software for the operating system

you are using from the TEAC Global Site (https://

teac-global.com/) and follow the installer proce-

dures to install it. See “Installing the dedicated

software” on page 10 for details.

Installer screen

2. Make the following settings according to the

computer you are using.

Windows

Open the Sound Control panel and set “

MiNiS-

TUDIO US-32/42

” as the Default Device on

both the Playback and Recording tabs. (See

“Windows” on page 23.)

Mac

Open the Utilities folder in the Applications

folder, and double-click “Audio MIDI Setup”.

Then, set “MiNiSTUDIO US-42” to “Use this

device for sound input” and “Use this device

for sound output”. (See “macOS” on page

23.)

TASCAM MiNiSTUDIO CREATOR 7

8Setting up the unit

NOTE

For details about the jack (IN 1) and other

parts, see “Top panel” on page 8 and “Front

panel” on page 9.

3. Set the LOOPBACK switch (o) to .ON

4. Confirm that the knob (IN VOLUME 4) is set to

MIN before connecting a mic.

iConnect a condenser or dynamic mic to the IN

jack ( ).1

iWhen using 4-pole headphones with a built-in

mic, connect it to the jack PHONES (TRRS)

( ).y

iWhen using the headset, connect the

headphone plug to the jack PHONES (TRRS)

( ) and the mic plug to the jack (yMIC u).

5. Set the mic type switch ( ) for the IN jack ( ) 5 1

according to the type of mic connected to it as

follows.

MIC +48V Condenser mic

(mic that requires power)

MIC Dynamic mic

(mic that does not require power)

NOTE

When using 4-pole headphones with a built-in mic

or a headset, you can set this to either MIC +48V

or .MIC

6. Say or sing something, and turn the IN

VOLUME LEVEL knob ( ) until the 4 meter (2)

lights green.

7. Confirm that the headphone knob ( ) is 6

set to , and connect headphones to the MIN

headphone jack (t).

When using this unit for a live broadcast, in

order to prevent feedback (signal looping), use

headphones or an earphone instead of speakers.

8. If you want to apply reverb to your voice, turn the

REVERB knob ( ).0

9. Press the button ( ) so that it lights to ON e

complete preparation.

Audio will start being sent to the computer, so

make the settings in the streaming software to

start streaming.

Start live broadcasting.

CAUTION

Refer to the help pages of the streaming software

to make various settings in it.

Refer to the following pages to use the other

functions of this unit.

Desired action Page

Use voice effects page 17

page 18

Play background music on the

computer page 23

Play sound effects

(SOUND PAD function)

page 17

page 18

Use with an iOS device (connecting) page 13

Use with an iOS device (powering) page 13

Use music on a tablet or other

connected device page 9, i

Using the unit as an audio interface

(music and video creation) page 9, o

8 TASCAM MiNiSTUDIO CREATOR

Names and functions of parts

Top panel

1 IN jack (BALANCED/UNBALANCED)

This XLR/TRS combo jack is an analog input.

It supports high impedance input, including

direct guitar input.

iXLR (1: GND, 2: HOT, 3: COLD)

iTRS

(Tip: HOT, Ring: COLD, Sleeve: GND)

Use the IN VOLUME knob ( ) to set the input 4

level.

Use the jack input switch (IN 5) to enable

balanced line input ( / ) or unbal-MIC +48V MIC

anced input ( ) for the TRS jack.INST

When directly connecting a guitar, bass or other

instrument, set the jack input switch (IN 5) to

INST.

2 LEVEL meters

These show the levels of the analog input signals.

When a signal is being input, this lights yellow

when the level is too low or too high, green

when the level is good and red when the signal

is distorting.

3 IN jack (BALANCED/UNBALANCED)

This XLR/TRS combo jack is an analog input.

It supports high impedance input, including

direct guitar input.

iXLR (1: GND, 2: HOT, 3: COLD)

iTRS (Tip: HOT, Ring: COLD, Sleeve: GND)

Use the IN VOLUME knob ( ) to set the input 9

level.

Use the jack input switch (IN 8) to enable

balanced line input ( / ) or unbal-MIC +48V MIC

anced input ( ) for the TRS jack.INST

When directly connecting a guitar, bass or other

instrument, set the jack input switch (IN 8) to

INST.

4 IN VOLUME knob

Use to adjust the input levels from the jack IN

( ) on the top of the unit, as well as from the mic 1

input for 4-pole headphones with a built-in mic

( ) and the headset jack mic input (y u).

CAUTION

The jack ( ) on the top of the unit, the mic IN 1

input for 4-pole headphones with a built-in mic

(y), and the headset jack mic input (u) cannot be

used at the same time.

5 IN jack input switch

Set according to the input source of the IN

jack ( ) on the top of the unit.1

MIC +48V Mic (phantom power on, +48V)

MIC Mic (phantom power off)

INST Instrument

NOTE

• When using 4-pole headphones with a built-in mic

or a headset, you can set this to either MIC +48V

or .MIC

• Phantom power is not output through the TRS

jack.

6 PHONE LEVEL knob

Use to adjust the output level from the

headphones jack (t) and the headphone

outputs for the 4-pole headphones with a built-in

mic jack ( ).y

CAUTION

Before connecting headphones, minimize the

headphones knob ( ). Failure to do so could 6

result in a sudden loud noise that could harm

hearing, for example.

7 Line output knob

Use to adjust the output level of the LINE OUT

L/R jacks (p) on the back of the unit.

8 IN jack input switch

Set according to the input source of the IN

jack ( ) on the top of the unit.3

MIC +48V Mic (phantom power on, +48V)

MIC Mic (phantom power off)

INST Instrument

NOTE

Phantom power is not output through the TRS

jack.

9 IN VOLUME knob

Use to adjust the input level of the jack (IN 3)

on the top of the unit.

10 TASCAM MiNiSTUDIO CREATOR

Rear panel

p LINE OUT L/R jacks (UNBALANCED)

These RCA pin jacks are analog line outputs.

a POWER switch

Use to turn the unit on and to put it into standby.

When the unit is turned on, the meters LEVEL

( ) light completely once.2

s USB 2.0 port

Use the included USB cable to connect the unit

to a computer. (Supports USB 2.0.)

CAUTION

• When using this unit connected to a computer, it

will receive power from the computer's USB port.

Depending on the computer, the USB port might

not be able to supply enough power to operate

the unit.

• When connected to a USB 3.0 port, it will function

in High Speed mode equivalent to USB 2.0 (480

Mbps maximum).

• After waking a computer from suspend (sleep)

mode, if the unit does not operate properly,

turn it off and turn it on again or disconnect and

reconnect the USB cable.

• USB 1.1 is not supported.

d DC IN 5V connector

When connected to an iOS device or other

equipment that cannot power this unit, you must

use a USB power adapter, mobile battery or other

power supply. See “When using an iOS device” on

page 13 for details.

f Kensington Security Slot

Installing the dedicated software

To use this unit with a computer, dedicated software

must be installed on the computer.

Download the latest software for the operating

system you are using from the TEAC Global Site

(https://teac-global.com/).

• When you install the dedicated software on a

Windows computer, the Windows driver and the

Settings Panel application will be installed.

• When you install the dedicated software on a

Mac, only the Mac Settings Panel application will

be installed.

The standard OS driver will be used.

• When using this unit with an iOS device, the

standard OS driver will be used, so there is no

need to install dedicated software.

CAUTION

Before starting to install software, quit other

applications.

Installing the Windows software

CAUTION

• Complete installation of the Windows software on

the computer before connecting the unit to it with

the USB cable.

• If you already connected the unit to the computer

using the USB cable before installing the Windows

software and the Found New Hardware Wizard

launched, close the message and disconnect the

USB cable.

8Windows software installation procedures

1. Download the latest Windows software for the

operating system you are using from the TEAC

Global Site (https://teac-global.com/) and save it

on the computer to be used with the unit.

2. Open the saved Windows software (zip file) on,

for example, the computer desktop.

3. Double-click the “TASCAM_MiNiSTUDIO_

Installer_XXX.exe”

(XXX is the version number) file

in the folder that appears after uncompression to

automatically launch the installation software.

4. When a “Security Warning” or “User Account

Control” screens appear, click the “Yes” button.

5. When the InstallShield Wizard screen appears,

click the “Next” button.

TASCAM MiNiSTUDIO CREATOR 11

6. Read the contents of the License Agreement,

and select “I accept the terms in the license

agreement” if you agree to the terms.

Then, click the “Next” button.

7. Click the “Install” button.

8. Click the “Install” button in the window that

opens to start installation (Windows 8.1 /

Windows 7).

9. The following screen appears when installation

has completed.

Click the “Finish” button.

10. The installer will quit and the Windows Settings

Panel will launch.

NOTE

After installing the software, the device driver will

be installed the first time the unit is connected

by USB. At this time, Windows will automatically

search Windows Update, so it might take some

time to recognize the unit connection. If the unit

is still not recognized after some time, open the

Software installation screen from the message

area at the bottom right of the computer display,

and click “Skip Obtaining Drivers From Windows

Update” to cancel the search.

Installing the Mac software

NOTE

• Install the Mac software on the computer before

connecting the unit to it with the USB cable.

• Depending on the Gatekeeper setting, a warning

message might appear during installation. See

“Working with Gatekeeper” for information

about Gatekeeper.

8Mac software installation procedures

1. Download the latest software for the operating

system you are using from the TEAC Global Site

(https://teac-global.com/) and save it on the

computer to be used with the unit.

2. Double-click “TASCAM_MiNiSTUDIO Installer_

XXX.dmg” (XXX is the version number), which is

the saved disk image file for the Mac software,

and double-click “ MiNiSTUDIO Installer.pkg”

inside the folder that opens.

NOTE

Depending on the computer’s settings, the

downloaded zip file might not have opened

automatically. In this case, open the zip file first

and then double-click the disk image file.

3. When the installer starts, click the “Continue”

button.

4. Next, select the desired language and click the

“Continue” button.

12 TASCAM MiNiSTUDIO CREATOR

5. Click the “Read License” button and check the

contents of the Software License Agreement. If

you agree to the contents, click “Agree”.

Then, click the “Next” button.

6. Click the “Install” button in the window that

opens to start installation.

7. The following screen appears when installation

has completed. Click the “Close” button.

Working with Gatekeeper

When using macOS, depending on the Gatekeeper

security function setting, a warning message might

appear during installation.

The solution depends on the warning message

shown. See the following explanations for details.

8When the Gatekeeper setting is “Allow

applications downloaded from: the Mac

App Store”

The following security warning might be shown:

“MiNiSTUDIO_Installer.pkg” can’t be opened

because it was not downloaded from the Mac

App Store.”

In this case, click the “OK” button to close the

message. Then, control-click (or right-click) the

file and click “Open”.

When the “MiNiSTUDIO_Installer.pkg” can’t be

opened because it was not downloaded from the

Mac App Store. Are you sure you want to open

it?” security warning message appears, click the

“Open” button.

This warning message might also appear when

the Gatekeeper setting is something other than

“Allow applications downloaded from: the Mac

App Store.”

The file still might not open and “MiNiSTUDIO_

Installer.pkg” can’t be opened because it was

not downloaded from the Mac App Store.” might

appear again.

In this case, copy the file from the folder where

it is to the desktop or another folder, and then

open it. Alternatively, change the Gatekeeper

settings to “Allow applications downloaded from:

the Mac App Store and identified developers”

and try opening it again.

8When the Gatekeeper setting is not “Allow

applications downloaded from: the Mac

App Store”

“MiNiSTUDIO_Installer.pkg” is an application

downloaded from the Internet. Are you sure

you want to open it?” might appear as a security

warning message. In this case, click the “Open”

button.

8Changing the Gatekeeper setting

The Gatekeeper setting can be changed using

the “Allow applications downloaded from:” item

on the “General” page of the “Security & Privacy”

pane of the System Preferences.

To change this, you must click the lock icon ( ) at

the bottom left and enter a password to unlock

the settings.

TASCAM MiNiSTUDIO CREATOR 13

This setting will lock again when you click the

button or type command-Q to close the System

Preferences or when you click “Show All” to close

the open pane.

CAUTION

Changing the Gatekeeper setting could result in

security risks.

If you changed the Gatekeeper setting to decrease

security (use one of the lower settings), set it back

to the original setting after updating the software

and/or firmware. (When installing a firmware

update immediately after software, do this after

installing the firmware update.)

Connecting the power

When using a computer (Windows/Mac)

Normally, when this unit is connected to a computer,

it will operate using USB bus power, so connecting a

separate power supply device is not necessary.

When using an iOS device

When this unit is connected to an iOS device, connecting

an external battery, USB power adapter or other power

supply device is necessary in order to power the unit.

Connect an external battery pack (TASCAM BP-6AA)

or the USB power adapter included with the iPad or

iPhone to a USB cable (sold separately), and connect

it to the port.DC IN 5V

External battery pack

Connect USB cable

(purchased separately)

CAUTION

• No USB power adapter is included with an iPod

touch. To use it with an iPod touch, purchase a

genuine Apple USB power adapter (that can supply

5 V and a current of at least 700 mA) separately.

• Operation with other external battery packs and

USB power adapters is possible, but we strongly

recommend using a TASCAM BP-6AA external

battery pack or the genuine Apple USB power

adapter included with the iPad/iPhone.

When using another external battery pack or

USB power adapter, be sure that the power

supply device meets the following specifications.

• Supplied voltage: 5 V

• Supplied current: 700 mA or more

Using a power supply device when the speci-

fications are other than the above could cause

malfunction, overheating, fire or other problems.

If anything abnormal occurs, stop use and contact

the retailer where you purchased the unit or a

TASCAM customer support service to request

repair.

Connection illustrations

Guitar

Mic

Examples of connections to a MiNiSTUDIO (top)

14 TASCAM MiNiSTUDIO CREATOR

Headset

Portable audio

player

Headphones

Examples of connections to a MiNiSTUDIO (front)

Powered monitor speakers

with RCA connectors

Computer

Examples of connections to a MiNiSTUDIO (back)

Connecting with a computer

Use the included USB cable to connect the unit to a

computer USB 2.0/3.0 port.

When the power is on, you can check the Settings

Panel Device item to confirm whether a USB

connection is working.

CAUTION

If you connect this unit to a computer via a USB

hub, for example, audio signal dropouts, clicking

noises and other interference could occur due to

the influence of other USB devices connected to

that hub. For this reason, we strongly recommend

connecting this unit to a separate USB port.

Connecting USB keyboards and mice, however, to

the same bus should not be a problem

Connecting iOS devices

You will need a Lightning to USB Camera Adapter and

the USB cable included with this unit to connect an

iOS device.

Audio connections

Analog audio signals input into this device from mics

and other audio equipment can be converted into

digital signals and sent to the computer via USB.

In addition, by connecting speakers (through an

amplifier if not powered) or headphones to this unit,

you can monitor audio signals that are input to this

unit and output from the computer.

CAUTION

Before connecting audio equipment, set the unit’s

VOLUME (4, ), line output (9 7) and headphones

( ) knobs to their lowest values. Failure to do so 6

could cause sudden loud noises from monitoring

equipment, and this could damage the equipment

or harm hearing.

8Connecting microphones

Dynamic mics

Set the / jack input switches (IN IN 5, 8)

to MIC IN IN, and connect the mics to the /

jacks (1, ) on the top of the unit.3

Condenser mics

When using a condenser microphone that

requires phantom power, connect it to the or IN

IN XLR jack (1 or 3), and then set the corre-

sponding input switch ( or 5 8) to

MIC +48V

CAUTION

• Before making connections, turn off this unit

and all connected devices (excluding computers/

iOS devices) to be connected (or put them into

standby).

• Do not set the / jack input switch ( IN IN 5

or ) to (phantom power on) when 8MIC +48V

connecting a mic that does not require phantom

power.

• Turning phantom power on when a dynamic mic

or other mic that does not require it is connected

could damage this unit and connected equipment.

• Do not connect or disconnect mics while phantom

power is on. Doing so could cause a loud noise

and might damage this unit and connected

equipment.

Set the VOLUME ( , ), line output (4 9 7) and

headphones ( ) knobsto their minimum values 6

before turning phantom power on/off. Depending

on the connected mics, sudden loud noises from

monitoring equipment could occur, and this could

damage the equipment or harm hearing.

• Supplying phantom power to some ribbon mics

will break them. If you are unsure, do not supply

phantom power to a ribbon mic.

TASCAM MiNiSTUDIO CREATOR 15

• If you connect this unit to a laptop computer that

is running on battery power and set the / IN IN

jack input switch ( or ) to , the 5 8 MIC +48V

computer battery charge will be used more quickly.

8Connecting guitars

When connecting a guitar or bass guitar directly to

this unit, use the or jack ( or ) on the IN IN 1 3

top of the unit and set the switch for that jack ( or 5

8) to .INST

8Connecting other audio equipment

Connect other audio equipment to the external input

jack (i) on the front of the unit.

Use the output level setting of the connected device

to adjust the input level.

8Connecting monitor speakers

Connect monitor speakers (powered speakers with

unbalance connections) to the / jacks on LINE OUT L R

the back of the unit.

Use the line output knob ( ) on the top of the unit to 7

adjust the speaker volume.

8Connecting headphones

Connect headphones to a headphones jack (standard

stereo jack (t) or stereo mini jack (y)) on the front

of the unit.

NOTE

The same signals are output from both the

standard stereo jack and the stereo mini jack.

CAUTION

Before connecting headphones, use the

headphones knob ( ) to minimize the volume. 6

Failure to do so could result in a sudden loud

noise that could harm hearing, for example.

Opening the Settings Panel

You can use the Settings Panel to make settings for the

various functions of this unit. You can also check the

versions of the firmware and software used by the unit.

You can open the Settings Panel in the following ways.

Windows

Windows 10

• From the Start menu select “MiNiSTUDIO

Settings Panel” under “TASCAM”.

Mac

• Using the Finder, open the Applications folder

and click “MiNiSTUDIO Settings Panel” to open

the Settings Panel.

Settings Panel overview

The Settings Panel has two tabbed pages.

Click a tab at the top of the Settings Panel to open

that page.

• EASY: This shows the current status of the driver

and information about connections. You can

also make various basic settings.

• EXPERT: Make settings for the built-in mixer and

effects, for example, on this page.

NOTE

When you open the Settings Panel, it will open in

the same state as when last closed.

Using the Settings Panel menu bar

Click “Mode Presets”, “Initialize”, “Scene Memory” or

“Extra Effects” at the top left of the menu bar on

either the “EASY” or “EXPERT” tab of the Settings Panel

to open the corresponding menu screen.

8Mode Presets (Windows only)

Set the LOOPBACK switch on the unit to OFF to

use this.

iCREATOR (default)

The settings of this preset are suitable when

using commercially-available DAW software, for

example.

iKaraoke

The settings of this preset are suitable for

Internet karaoke, for example.

Set ASIO to “ON” in the Settings Panel if you

want to use compatible VST plug-ins to add

echo or other effects.

When using the MiNiSTUDIO built-in effects, set

ASIO to “OFF” in the Settings Panel.

iTalking

The settings of this preset are for talking using

ordinary Internet audio/video communication

applications, for example.

iTalking with PON/BGM

The settings of this preset are for talking using

ordinary Internet audio/video communi-

cation applications, for example, while using

the built-in SOUND PAD function or playing

background music from an audio application or

another application.

16 TASCAM MiNiSTUDIO CREATOR

iGaming

The settings of this preset are for live streaming

of game play while talking to other players in

games that support voice chat.

iPodcast Multi-channel

The number of ASIO input channels has been

increased to six.

In addition to the Mic inputs (Mixing Driver

In1/2), the output of the “MiNiSTUDIO US-32/42”

Windows Driver can be assigned to Mixing

Driver In3/4 and the output of the “Additional

driver US-32/42” can be assigned to Mixing

Driver In5/6.

When using a DAW, different audio can be

recorded to separate tracks, and adjustments

can be made independently, allowing you to

easily create podcast materials. (See “Creating

podcasts (Windows only)” on page 21.)

NOTE

As before, only Mixing Driver In1/2 can be used

with mode presets other than Podcast Multi-

channel. When switching to or from a different

mode preset, the ASIO application must be

restarted and audio settings updated. The Settings

Panel must also be restarted.

8Initialize

The Settings Panel will be set as follows.

iALL Settings

The EQUALIZER, COMPRESSOR, REVERB, EFFECT

and

SOUND PAD

settings will be set to their

default values,

SOUND PAD

LATCH will be turned

on, and nothing will be assigned as the

SOUND

PAD

sound source.

iPON Settings

SOUND PAD LATCH is set to ON and SOUND PAD

sound sources are set as follows.

SOUND PAD 1: NO!!

SOUND PAD 2: YES!!

SOUND PAD 3: APPLAUSE!

iEQUALIZER Settings

Initialize the EQUALIZER settings.

iCOMPRESSOR Settings

Initialize the COMPRESSOR settings.

iREVERB Settings

Initialize the REVERB settings.

iEFFECT Settings

Initialize the EFFECT settings.

8Scene Memory

A maximum of five scenes can be saved. The name of

each scene can be changed as desired by using the

“Rename” submenu item.

iScene Files 1–5 items

Use to save the current Settings Panel settings as

a scene memory.

Five scene memories have been prepared in

advance.

iInitialize Memory item

Use to clear all five scene memories.

For details, see “Resetting all scene memories” on

page 16.

NOTE

The “BUFFER SIZE” item on the EXPERT page is not

saved.

Resetting all scene memories

You can clear the five scene memories.

CAUTION

After resetting, you cannot restore the previous

settings.

1. In the menu bar, open the “Scene Memory”

menu, and click “Initialize Memory”

2. The following confirmation message, which

explains that all scene memories will be reset,

will appear.

TASCAM MiNiSTUDIO CREATOR 17

3. Click the “OK” button to reset all the scene

memories.

NOTE

Click the “Cancel” button to return to the Settings

Panel without initializing the five scene memories.

8Extra Effects

iDucking

Open the ducking setting screen where the

ducking function can be set. (See “Using the

ducking function” on page 22.)

EASY page

NOTE

Click buttons with the mouse to turn them on and

off.

1 Status area

This shows the current status of the software.

Item displayed Meaning

Software version This is the software version.

Firmware version This is the firmware version

used by the connected unit.

Device

This shows the name of

the connected unit. (“No

Device” is shown when no

device is connected.)

Sample Rate This shows the sampling

frequency.

2 MIC 1/MIC 2 tabs

Use these to switch between showing the

SOUND and EFFECT controls for the MIC 1 (1, , y

u) input jacks and the MIC 2 input jack ( ).3

3 SOUND area

Use this to select a preset sound quality to apply

to the signals input through the inputs (1, 3, y

and u).

The indicator lights for the selected sound quality.

Options: Soft Vocal, Hard Vocal, OFF, Hard

Spoken, Soft Spoken, EXPERT

NOTE

If the “EXPERT” is selected, the Compressor and

Equalizer settings on EXPERT page would be

assigned.

4 EFFECT area

Use this to select a preset effect to apply to the

signals input through the inputs (1, 3, and y u).

The indicator lights for the selected effect.

Options: RADIO, ECHO, MALE, FEMALE,

CHOPPER, EXPERT

NOTE

If the “EXPERT” is selected, the EFFECT settings on

EXPERT page would be assigned.

5 REVERB area

Use this to select a preset reverb to apply to the

signals input through the inputs (1, 3, and y u).

The indicator lights for the selected reverb.

Options:

HALL, ROOM, LIVE, STUDIO, PLATE, EXPERT

NOTE

If the “EXPERT” is selected, the REVERB settings

on EXPERT page would be assigned.

6 Triggered sound output volume sliders

Use these to adjust the volume of triggered sounds.

Slide to MIN to mute or toward MAX to amplify the sound.

7 Repeat buttons

When a repeat button is on, the arrows light and the

repeat function for the triggered sound is enabled.

8 Trigger sound status

Drag and drop audio files to load them.

iWhen a SOUND PAD trigger pads (1/2/3) has an

audio file loaded, the name of that file is shown

in the trigger sound status area and it lights

orange.

iWhen there is a problem with a loaded audio

file, the name of that file is shown in the trigger

sound status area but the area appears gray.

iWhen no audio file is loaded, the trigger sound

status area appears gray.

18 TASCAM MiNiSTUDIO CREATOR

EXPERT page

CAUTION

The EQUALIZER, COMPRESSOR and REVERB have

no effect on the external input jack (i).

NOTE

• Use the mouse to click and drag parameter knobs

up and down to adjust them.

• Click buttons with the mouse to turn them on and

off.

1 EQUALIZER area

This unit has a 4-band equalizer (with HIGH, HIGH

MID, LOW MID and LOW bands).

Use the equalizer to increase or decrease the levels

of specific frequency ranges. This can be used,

for example, to enhance the sound of individual

instruments, to adjust the balance of a wide

frequency range and to cut specific unwanted

frequencies. (See “EQUALIZER (4-band parametric

EQ) display area overview” on page 19.)

2 COMPRESSOR area

When the input volume exceeds the THRESHOLD

level, the input volume is compressed, reducing

output volume variation.

For example, by reducing the levels of loud sounds,

lower level sounds become relatively louder,

creating a more even volume level throughout

and a more sustained sound. (See “COMPRESSOR

display area overview” on page 20.)

NOTE

When the compressor is off, the compressor curve

will appear but the meters will not be active.

3 RVB SEND display area

If a reverb type switches other than OFF is

selected, the mic reverb can be turned on/off.

Options: ON (default), OFF

4 EFFECT area

Use this to select a preset effect to apply to the

signals input through the inputs (1, 3, and y

u). Use the BALANCE knob to adjust the dry/

wet signal balance. (See “EFFECT display area

overview” on page 20.)

5 BUFFER SIZE setting area (Windows only)

The Windows driver for the unit stores the audio

signals sent to and from the computer tempo-

rarily in a buffer. This buffer size can be adjusted.

Smaller buffer sizes result in less audio signal

delay (latency), but require high-speed

processing by the computer.

If the processing cannot keep up, for example,

due to other system operations, clicking and

popping noises might occur and the audio signal

might even drop out.

Increasing the buffer size will stabilize operation

and suppress negative effects on audio signals,

but the delay in audio signals sent to the

computer will increase.

You can use the slider on the panel to adjust the

buffer size, according to the use conditions.

Use the slider to select fixed values that increase

from left to right.

Options: 1024, 512, 256, 128, 64

6 ASIO setting area (Windows only)

This turns ASIO use on or off.

Turn this ON when using a plug-in that supports

ASIO on signals being input to the unit.

Options: ON, OFF

CAUTION

If this is left ON when not using a plug-in that

supports ASIO, input signals will not be output.

7 Reverb type switches

Use to select the type of reverb.

Depending on the type, the density and level of

the reverb sound changes.

Options:

HALL, ROOM, LIVE, STUDIO, PLATE, OFF

8 PRE DELAY knob

Set the amount of delay until the first reverberations.

The larger the value, the larger the reverberations

make the room sound.

Range: 0–250 ms

9 REVERB TIME knob

Set the amount of time that the reverberations

continue.

The larger the value, the longer they continue.

Range: 0.1–10 s

0 DIFFUSION knob

Sets the breadth of the reverberations.

Range: 0–100

TASCAM MiNiSTUDIO CREATOR 19

q Trigger sound area

Make trigger sound settings here. (See “SOUND

PAD trigger display area overview” on page 20.)

w COMPUTER fader

Use this to adjust the amount of signal returned

from the computer.

The adjusted value is shown below the fader.

e MASTER fader

Use this to adjust the level of the output signal.

The adjusted value is shown below the fader.

r OUTPUT setting area

Set whether the MASTER signal output is mono

or stereo.

Options: STEREO, MONO

t USB DELAY setting area

During live broadcasts, screen capture latency can

result in timing differences between video and

audio. By intentionally adding delay to the audio

output by USB, you can correct this difference.

Range: 0 ms–2000 ms

NOTE

The USB DELAY setting cannot be used when the

sampling frequency is 88.2 or 96 kHz.

y DIRECT MONITOR setting area

Set whether the MASTER signal output is mono

or stereo.

Options: STEREO, MONO, OFF

8EQUALIZER (4-band parametric EQ)

display area overview

1 EQ graph

This shows the frequency response with the

current equalizer settings.

The graph is shown even when the equalizer is off.

2 GAIN (HIGH/HIGH MID/LOW MID/LOW) knobs

Set the amount the levels are increased or decreased

for the HIGH, HIGH MID, LOW MID and LOW bands.

Range: ±12 dB (default: 0 dB)

3 FREQ (HIGH/HIGH MID/LOW MID/LOW) knobs

Set the cutoff frequencies of the HIGH, HIGH MID,

LOW MID and LOW bands.

Ranges

HIGH: 1.7 kHz–18.0 kHz (default: 5 kHz)

HIGH MID: 32 Hz–18.0 kHz (default: 1.2 kHz)

LOW MID: 32 Hz–18.0 kHz (default: 300 Hz)

LOW: 32 Hz–1.6 kHz (default: 80 Hz)

4 Q (HIGH MID/LOW MID) knobs

Set the acutenesses of the peaks of the HIGH MID

and LOW MID bands.

The higher the value the more acute it becomes,

making it affect a narrower frequency band.

The lower the value, the less acute it becomes,

making it affect a broader frequency band.

Ranges

HIGH MID: 0.25–16.00 (default: 1.00)

LOW MID: 0.25–16.00 (default: 1.00)

5 LCF button

Click the LCF button to enable a low cut filter that

cuts noise and other sounds at low frequencies.

The LCF button lights when enabled. (Default: off)

20 TASCAM MiNiSTUDIO CREATOR

8COMPRESSOR display area overview

1 Compressor status display

Three meters show the level of the signal input

to the compressor (INPUT), the level of the signal

output from the compressor (OUTPUT) and the

gain reduction caused by the compressor (GR).

2 THRESHOLD knob

Sets the threshold level that will cause the

compressor to start.

Range: −32 dB–0 dB (default: 0 dB)

3 ATTACK knob

Sets the amount of time until the compression

reaches the compression RATIO setting after the

input volume exceeds the threshold.

Range: 2 ms–200 ms (default: 2 ms)

4 GAIN knob

Sets the gain of the output signal.

When the volume is compressed, the output

level becomes lower than the input level. Use the

GAIN knob to increase the output level so that it

is close to the input level.

Range: 0 dB–20 dB (default: 20 dB)

5 RATIO knob

Sets the compression ratio for the input volume.

Turning it right raises the compression ratio,

increasing the amount of compression.

Range: 1.0:1–inf:1 (default: 1.0:1)

6 RELEASE knob

Sets the amount of time until the compression

stops and the sound returns to its uncompressed

level after the input sound goes below the

threshold level.

Range: 10 ms–1000 ms (default: 10 ms)

NOTE

When the compressor is off, the compressor curve

will appear but the meters will not be active.

8EFFECT display area overview

1 EFFECT type switches

Use this to select a preset effect to apply to the

signals input through the inputs (1, 3, and y

u).

Options: RADIO, ECHO, MALE, FEMALE, CHOPPER, OFF

2 ADJUST knob

Adjust the amount the sound is affected.

Turn it toward right increase the amount the

sound is affected.

8SOUND PAD trigger display area overview

1 Trigger sound status

Drag and drop audio files to load them.

iWhen a SOUND PAD trigger pads (1/2/3) has an

audio file loaded, the name of that file is shown

in the trigger sound status area and it lights

orange.

iWhen there is a problem with a loaded audio

file, the name of that file is shown in the trigger

sound status area but the area appears gray.

iWhen no audio file is loaded, the trigger sound

status area appears gray.

2 FADE IN knob

Sets the fade in time of the triggered sound.

Range: 0.00–5.0 s (default: 0.00 s)

3 LEVEL knob

Adjusts the volume of triggered sound.

Range: 0–100 (default: 60)

4 FADE OUT knob

Sets the fade out time of the triggered sound.

Range: 0.00–5.0 s (default: 0.00 s)

5 START TIME knob

Sets where playback of the triggered sound starts

in the file.

Range: 0.0–5.0 s (default: 0.0 s)

TASCAM MiNiSTUDIO CREATOR 21

6 REPEAT button

When a repeat button is on, the arrows light and the

repeat function for the triggered sound is enabled.

Default: off

7 LATCH/UNLATCH button

This sets the SOUND PAD trigger pad mode.

LATCH: Press a SOUND PAD trigger pads

once to start playback, and press

it again to stop playback.

UNLATCH: Press and hold a SOUND PAD

trigger pads to play the sound for

as long as it is held down. Release

the button to stop playback.

8 VELOCITY button

This sets the operation modes of the SOUND

PAD trigger pads (1/2/3).

When on, VELOCITY lights and operation is as

follows.

Default: off

On: The playback volume of the

SOUND PAD sound is affected by

how hard the SOUND PAD trigger

pads (1/2/3) is pressed.

Off: The playback volume of the

SOUND PAD sound is set by the

LEVEL knob. It is not affected by

how hard the SOUND PAD trigger

pads (1/2/3) is pressed.

Driver settings for specific purposes

(Windows only)

Purpose

ASIO driver set with

DAW software or

other application

Sound default

device

Using a DAW or other

application primarily

for recording

MiNiSTUDIO

US-32/42 ASIO* Basic driver US-42*

Using a DAW or other

application primarily

for playback

MiNiSTUDIO

US-32/42 Mixing

Driver

MiNiSTUDIO

US-32/42

Using primarily for live

broadcast/karaoke

* This might improve performance depending on the

operating conditions.

NOTE

“Additional driver US-32/42” is compatible with

major communication apps.

Creating podcasts (Windows only)

Podcasts may be recorded in multi-channel sessions

by selectively assigning the various drivers to the

appropriate DAW tracks. This allows for complete

control over of individual audio streams during

Post-Production Audio Editing.

NOTE

A DAW (Digital Audio Workstation) or other

software that supports ASIO input is for multi-

channel podcast recording.

1. Select "Podcast Multi-channel" from the Mode

Presets in the MiNiSTUDIO Settings Panel.

2. Open your DAW and select "MiNiSTUDIO

US-32/42 Mixing Driver" as the ASIO device.

3. Create new tracks and assign their inputs as

follows.

DAW Track 1

Mixing Driver

In1/In2

input from Mic 1/2

DAW Track 2

Mixing Driver

In3/In4

output from

"MiNiSTUDIO

US-32/42" Windows

driver

DAW Track 3

Mixing Driver

In5/In6

output from

"Additional US-32/42"

Windows driver

NOTE

• Separate DAW Tracks may be created for Mixing

Driver 1 (Mic 1) and Mixing Driver 2 (Mic 2)

• Tracks can be monitored as desired by enabling

their monitoring functions in the DAW.

For example, when a mic is connected to the

input of this unit and the Windows default device

is set to "MiNiSTUDIO US-32/42", and the input/

output device for ordinary Internet audio/video

communication apps is set to "Additional driver",

the following input sounds can be monitored if

monitoring is enabled for each track.

DAW Track 1

Input from MiNiSTUDIO mic inputs

DAW Track 2

MiNiSTUDIO SOUND PAD playback

and other PC sounds and Music

DAW Track 3

Call-in guest speech from popular

audio/video conference call

applications

NOTE

Voices from more than one simultaneous call-in

guests will be combined on a single audio track.

4. Record in the DAW.

5. Edit: Adjust audio balance, add effects, remove

unwanted pauses or content, etc.

22 TASCAM MiNiSTUDIO CREATOR

Using the ducking function

When a mic signal is input, this function can automat-

ically lower the volume of background music or other

sound that is playing back on the computer or input

through the AUX jack on the front of the unit. Open

the ducking setting screen from the “Extra Effects”

menu at the top of the Settings Panel.

First, select the background music input source, and

set the “THRESHOLD” knob.

Then, adjust the “ATTENUATE” and “RELEASE TIME”

knobs as necessary.

1 DUCKING indicator

This indicator appears lit within the ducking

function is on.

2 Ducked sound source

Select the source to be ducked.

Only AUX can be selected when using a Mac.

Options Meaning

COMPUTER

Background music playing

on the computer will be

ducked.

AUX(default)

Background music playing

from the AUX input will be

ducked.

COMPUTER/AUX Both sources will be

ducked.

3 Ducking function ON/OFF buttons

These turn the ducking function on and off.

4 Effect illustration

This shows how the “ATTENUATE” and “RELEASE

TIME” knob settings affect the ducking level.

5 THRESHOLD knob

Ducking is activated when the mic input exceeds

this set level.

To use the ducking function when the mic input

level is low, set this parameter to a low value

(−30dBFS is the minimum).

Setting values: 0dBFS, −6dBFS, −9dBFS,

−12dBFS, −15dBFS,

−18dBFS(default), −21dBFS,

−24dBFS, −27dBFS, −30dBFS

6 ATTENUATE knob

This sets the amount that the background music

volume level will be reduced.

Setting values: 0dB, −3dB, −6dB, −9dB,

−12dB(default), −18dB, −24dB,

−27dB, −30dB

7 RELEASE TIME knob

This sets the amount of time until the background

music volume returns to normal after the mic

input goes below the “THRESHOLD” level.

Setting values: 0.1s, 0.5s, 1.0s, 1.2s, 1.5s, 1.8s,

2.0s(default), 2.5s, 3.0s, 3.5s,

4.0s, 4.5s, 5.0s

Notification function

Notifications will be shown if the computer being

used is connected to the Internet when the Settings

Panel is launched.

NOTE

Put a check in the “Do not show the same

message again” checkbox to prevent the

same message from being shown the next

time it is launched.

Automatic Settings Panel and

firmware update function

If the computer you are using is connected to the

Internet, when a new version of the Settings Panel

or the firmware is released, a notification about

automatic updating will appear when the Settings

Panel is launched.

Settings Panel update notification

Firmware update notification

Click the “Update now” button if you want to use the

latest version of the Settings Panel or firmware.

The file will be downloaded automatically in

the update software will launch.

24 TASCAM MiNiSTUDIO CREATOR

Troubleshooting

Please read this chapter if you are unable to use the

unit properly even after setting it up following the

procedures in this manual.

If you are still unable to resolve a problem, please

contact the store where you purchased this unit or

TASCAM customer support service with the following

information about the operating environment and

details about the trouble.

8Operating environment

• Computer manufacturer:

• Model:

• CPU:

• Memory (RAM):

• Operating system:

• Applications used:

• Antivirus software:

• Wireless LAN use:

See the end of this document for contact information.

8The dedicated software cannot be installed.

1. Check the operating system

The operating system you are using might not be

supported by the software that you are trying to

install. Check the operating systems supported

by the software that you are trying to install.

2. Stop software that is running in the background

Antivirus software and other software running in

the background can interfere with installation.

Quit software running in the background and try

installing again.

8The unit is connected, but the computer

does not recognize it.

1. Install the dedicated software

iIf you have not done so, install the dedicated

software. See “Installing the dedicated software”

on page 10 for details.

2. Change the USB port

iThis unit will not work with USB 1.1. Use a USB

2.0 or USB 3.0 port.

iDo not use a USB hub. Always connect the unit

directly to a USB port on the computer.

iIf the above steps do not resolve the problem,

connect the unit to a different USB port on the

computer.

8There is no sound even though audio is

playing back on the computer.

Windows

• See the " Windows " section of the "Application

guide", and make settings as necessary for the

OS.

Mac

1. Quit all applications and open "System Prefer-

ences…" from the Apple menu.

2. Open "Sound".

3. On the Output tab, select “MiNiSTUDIO US-42”.

After completing the setting, restart the computer

and check the sound of playback.

Depending on the application that you are using,

you might need to make additional device settings.

Please see the manuals for the applications that you

are using for detailed setting procedures.

8Sound breaks up or there is noise.

The processing load on the computer causes sound

to break up and noise to occur.

Here are some methods to reduce the load on the

computer.

1. A wireless LAN and software running in the

background, including antivirus software, regularly

put processing loads on the computer, which can

cause sound to break up and other noise.

Stop wireless LAN transmission, antivirus

software and other software running in the

background when using this unit.

2. Set the buffer size (latency) in the audio appli-

cation that you are using or in this unit's Settings

Panel to a larger value. (Windows only)

NOTE

Consult the maker of the audio application that

you are using for methods to reduce its load on

your computer.

3. Change the settings of your computer so that

they are optimal for audio processing.

Using Windows

1 Open “System” using the appropriate method

for the OS you are using (Windows 10 /

Windows 8.1 / Windows 7).

iIn Windows 10, open the “Control Panel”.

Then, click the “System” icon.

iIn Windows 8.1, right-click the ordinary Start

screen (Metro user interface screen) and then

click “All apps”. Then, right-click “Computer”

and select “Properties”.

iIn Windows 7, from the Start button right-

click “Computer” and select “Properties”.

2 Click “Advanced system settings”.

3 Click “Settings” in the “Performance” section of

the “Advanced” tab of the “System Properties”

window.

4 In the “Visual Effects” tab of the “Performance

Options” window, select “Adjust for best

performance”.

Produktspecifikationer

Varumärke:	Tascam
Kategori:	Inte kategoriserad
Modell:	MiNiSTUDIO Creator US-42B

Behöver du hjälp?

Om du behöver hjälp med Tascam MiNiSTUDIO Creator US-42B ställ en fråga nedan och andra användare kommer att svara dig

Ditt namn*

Din e-post*

Skriv din fråga här

Inte kategoriserad Tascam Manualer

Tascam US-1X2 Bruksanvisning

4 Oktober 2024

Tascam Porta-02MKII Bruksanvisning

19 September 2024

Tascam DR-10L Pro Bruksanvisning

11 September 2024

Tascam TC-8 Bruksanvisning

2 September 2024

Tascam US-800 Bruksanvisning

2 September 2024

Tascam 424MKIII Bruksanvisning

28 Augusti 2024

Tascam DP-008 Bruksanvisning

25 Augusti 2024

Tascam VL-A4 Bruksanvisning

25 Augusti 2024

Tascam US-1200 Bruksanvisning

21 Augusti 2024

Tascam MiNiSTUDIO Creator US-42B Bruksanvisning

20 Augusti 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips 55PUS6551 Bruksanvisning

16 Januari 2025

Philips 32PHS4504 Bruksanvisning

16 Januari 2025

Electrolux RH36WC40GS Bruksanvisning

16 Januari 2025

Rocstor SolidKVM SK05 Bruksanvisning

16 Januari 2025

Carlsbro CSD25M Bruksanvisning

16 Januari 2025

Carlsbro CSD45M Bruksanvisning

16 Januari 2025

Carlsbro CSD35M Bruksanvisning

16 Januari 2025

On-Q EN2050 Bruksanvisning

16 Januari 2025

On-Q EN1420 Bruksanvisning

16 Januari 2025

Chief Kontour KRA300B Bruksanvisning

16 Januari 2025