Taylor TP16FF Bruksanvisning

Taylor Köksvåg TP16FF

Läs nedan 📖 manual på svenska för Taylor TP16FF (4 sidor) i kategorin Köksvåg. Denna guide var användbar för 9 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/4
Compact Mechanical
Portion Control Scales
Instruction Manual
TP16,
TP16FF,
TP32
1
Leading the Way in Accuracy®
2
Thank you for purchasing a Taylor® Portion Control
scale. Your Taylor® scale is an example of superior
design and craftsmanship. Please read this instruction
manual carefully before use. Keep these instructions
handy for future reference.
General Operation
1. Place the scale on a hard, level surface
2. Before using the scale, allow it to reach room
temperature, then perform the following steps:
A. Place weight on scale and allow pointer to come
to rest.
B. Remove weight and allow pointer to come to rest.
C. After repeating this cycle two or three times,
adjust pointer to zero using the adjustment knob
located on top of the scale body, beneath the
platform, and repeat the adjustments until zero is
stabilized.
3. If scale is relocated, readjustment to zero may be
required. To do so, repeat above steps. When
weighing, evenly distribute weight on platform.
Soft Serve Calibrator Feature
(Model TP32 only)
This model has the percentage of overrun scales
for a pint sample or a quart sample. Refer to your
manual for the soft serve machine manufacturer’s
recommendation.
1. You will need an accurate one pint or one quart
measuring cup to hold the sample.
2. You must tare-out (Re-Zero) the scale with the empty
cup to be used.
3. Be sure to Re-Zero the scale after the calibration of
your soft serve machine.
Care and Maintenance
1. The body and mechanism are not dishwasher
safe. Immersing the scale in water may trap liquid
between lens and body that can not be effectively
dried out. Damage will void warranty.
2. Caution … An occasional wiping with a soft cloth
and mild soap will keep your Taylor® scale clean
and attractive. Do not use abrasive cleaners. Your
Taylor® scale does not require oiling or lubrication of
any kind.
3. Do not tamper with unit’s internal components.
Doing so will invalidate the warranty on this unit and
may cause damage. The unit contains no user-
serviceable parts.
4. The lens can
be removed by
pressing in on the
tab at the bottom
of the bezel and
pulling the lens/
bezel away from
the scale case.
There are two (2)
tabs at the top and
the entire lens/bezel
will lift up and out
of slots in the lens.
You can clean the
inside of the lens this
way but be careful
to not bend the red
pointer. Do the reverse to reattach and snap the
tab into its slot on the bottom.
3

Produktspecifikationer

Varumärke: Taylor
Kategori: Köksvåg
Modell: TP16FF

Behöver du hjälp?

Om du behöver hjälp med Taylor TP16FF ställ en fråga nedan och andra användare kommer att svara dig


Köksvåg Taylor Manualer

Taylor

Taylor 3719-49 Bruksanvisning

8 Januari 2025
Taylor

Taylor 3741 Bruksanvisning

8 Januari 2025
Taylor

Taylor 3880 Bruksanvisning

8 Januari 2025
Taylor

Taylor TE22OS Bruksanvisning

28 December 2024
Taylor

Taylor 384521 Bruksanvisning

26 September 2024
Taylor

Taylor 5302553 Bruksanvisning

22 September 2024
Taylor

Taylor 3812 Bruksanvisning

13 September 2024
Taylor

Taylor 3842 Bruksanvisning

13 September 2024
Taylor

Taylor 1250BK Bruksanvisning

13 September 2024
Taylor

Taylor 1053 Bruksanvisning

13 September 2024

Köksvåg Manualer

Nyaste Köksvåg Manualer

Heinner

Heinner HKS-5RSS Bruksanvisning

14 Januari 2025
Heinner

Heinner HKS-BK10USB Bruksanvisning

14 Januari 2025
Heinner

Heinner HKS-BK5USB Bruksanvisning

14 Januari 2025
Comelec

Comelec BCCH6102 Bruksanvisning

13 Januari 2025
Sencor

Sencor SKS 31GR Bruksanvisning

9 Januari 2025
Ade

Ade KE 707 Angelina Bruksanvisning

9 Januari 2025
Kern

Kern PES 15000-1M Bruksanvisning

7 Januari 2025
Adler

Adler AD 3173 Bruksanvisning

7 Januari 2025
Primo

Primo SCK2 Bruksanvisning

7 Januari 2025
Listo

Listo BCL6 Bruksanvisning

5 Januari 2025