Technoline WQ 323 Bruksanvisning

Technoline Klockradio WQ 323

Läs nedan 📖 manual på svenska för Technoline WQ 323 (2 sidor) i kategorin Klockradio. Denna guide var användbar för 2 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/2

Talking Alarm Clock

Features

• Quartz alarm clock

• Date display

• 4 alarms

• Hourly time announcement

• Stopwatch up to max. 23h 59min 59s

• Volume control (2 steps)

• Blue backlight

Key instructions

SET key: Press once to check the year and talking time. Press for a while to

enter into time setting.

UP key:

Press once to turn on or off the Hourly time announcement function

When it’s in setting mode, it uses as an UP-adjusting key.

MODE key:

Press once to enter into the following modes: Count up

Alarm 1

Alarm 2 Æ Alarm 3 Æ Alarm 4 Æ Return to normal time

LIGHT switch: To turn on or off the backlight

TALK/LIGHT key: When LIGHT switch is at ON position, press TALK/LIGHT key to talk

time and light up the backlight for 5 seconds, whereas when LIGHT

switch is at OFF position, press this key to talk time only.

VOLUME switch: To select High or Low volume.

Time setting

1. Press SET key for a while to enter into time setting. The setting digits will flash in the

following sequence: Hour Æ Minute Æ Year Æ Month Æ Day Æ Hour…

2. Use UP key to select the digit. Press UP key for a while to speed up the digit

up-adjustment.

3. Press MODE key to exit the setting mode. The setting is saved automatically and the

clock returns to normal time mode.

If there’s no any key pressed in 1 minute, the clock will also exit the setting mode and returns

to normal time mode. The setting is saved automatically.

Hourly time announcement

In normal time mode, press UP key to turn on or off the hourly time announcement function.

Count up setting

1. In normal time mode, press MODE key once to enter into Count Up mode.

2. Press UP key to start or pause counting up.

3. When the clock is counting up, press SET key once to change the display of Second digit

to “ : ” flashing in the middle. When the clock count up is paused, press SET key to reset.

4. In count up mode, press TALK/LIGHT key to speak out the current count up time. If

LIGHT switch is at ON position then backlight will also light up for 5 seconds.

Talking count up time intervals:

First 10 seconds: The clock will speak out the current count up time.

10 second to 1 minute: The clock will speak out the current count up time every 10

seconds.

1 minute to 10 minutes: The clock will speak out the current count up time every 1

minute.

After 10 minutes: The clock will speak out the current count up time every

10 minutes.

5. Press MODE key to return to normal time mode and speak out the current time. If under

normal time mode or alarm mode, the clock will NOT speak out the current count up time

as mentioned above. If count up time is not reset or paused, the clock will keep counting

up.

Alarm time setting

1. In normal time mode press MODE key to enter into the following alarm time:

Count up Æ Æ Alarm 1 Alarm 2 Æ Alarm 3 Æ Æ Alarm 4 Return

2. In any alarm mode, press UP key to turn on or off the current alarm function.

3. In Alarm 1 mode, press SET key for a while to enter into Alarm 1 time setting. The

following setting digits will ﬂash in sequence: Alarm 1 hour Æ Alarm 1 minute

4. Use UP key to select the digit. Press UP key for a while to speed up the digit

up-adjustment.

5. The same setting is applied to Alarm 2, Alarm 3 and Alarm 4.

If there’s no any key pressed in 30 seconds, the clock will exit the alarm mode and return to

normal time mode and the clock will make two BEEP sounds.

Consideration of duty according to the battery law

Old batteries do not belong to domestic waste because they could cause damages of health

and environment. End-users are committed by law to bring back needed batteries to

distributors and other collecting points!

Produktspecifikationer

Varumärke:	Technoline
Kategori:	Klockradio
Modell:	WQ 323
Färg på produkten:	Wit
Internationell säkerhetskod (IP):	IP20
Innehåller inte:	Halogeen
Drifttemperatur (TT):	0 - 40 °C
Spänningsklassificering:	250 V