Tennsco J1842A-SND Bruksanvisning

Tennsco Garderob J1842A-SND

Läs nedan 📖 manual på svenska för Tennsco J1842A-SND (4 sidor) i kategorin Garderob. Denna guide var användbar för 13 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF

Sida 1/4

GENERAL SAFETY INFORMATION

Some parts may have sharp edges. CARE must be taken when handling

For safety, wear a pair of work gloves when assembling or performing a

LIMITED WARRANTY

Tennsco warrants goods purchased hereunder to be free of defects in materials and workmanship for a period of one (1) year from the

in the event goods are damaged as a result of misuse, abuse, neglect, accident, improper application, modication or repair by person

shipment, or where the date stamps on the goods have been defaced, modied or removed. UNLESS CONSIDERED UNENFORCEABLE

a. ALL IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OR MERCHANTABILITY AND FITNESS FOR A

b. BUYERS REMEDY, IF ANY, FOR ANY DEFECTIVE GOODS SHALL BE LIMITED TO A REFUND BY SELLER OR REPLACEMENT

EVENT INCLUDE DAMAGES OF ANY KIND, WHETHER INCIDENTAL, CONSEQUENTIAL OR OTHERWISE.

NO GOODS ACCEPTED FOR RETURN WITHOUT PRIOR APPROVAL. Seller shall have the right to inspect any goods claimed to be defective at Buyers place of business or require Buyer to return the

goods to Seller for inspection on Seller’s premises. Transportation charges covering returned goods will be borne by Seller only if such goods are proven to be defective, are covered by this warranty

and are returned within the warranty period stated above.

PK-2310918

ASSEMBLY INSTRUCTIONS & PARTS MANUAL

RETAIN INSTRUCTIONS FOR FUTURE REFERENCE

Jumbo Counter-Height Storage Cabinet

Unassembled Models J1842A-N & J2442A-N

Tennsco LLC., Dickson, TN 37056-1888 • (866) 446-8686

LOAD CAPACITIES PER SHELF LEVEL

48w x 18d

48w x 24d

400 lbs.

UNIT SIZE WEIGHT CAPACITY

EVENLY DISTRIBUTED

ASSEMBLY OF J1842A-N OR J2442A-N CABINET

Tools Needed: A free 11/ ” nut driver is included with each Tennsco cabinet. 32

Two people are recommended for assembly. Approximate assembly time: 20-30 minutes.

2. Place the back panels (Ref. No. 1) on a smooth surface,

making sure that the anges of both panels are facing up.

Overlap the right panel over the left anel. After aligning the

holes, bolt the two panels tightly together with four bolts

and nuts (Ref. Nos. 17 & 18).

1. The reference numbers used throughout this sheet refer to

the illustration on the back cover. This is to help you to

identify the various parts as they are mentioned.

3. Attach the left side (Ref. No. 2) to the back by placing ange

(A) around the back and bolting tightly together with four

bolts and nuts. Be sure that the lances on all the shelf

adjustment strips (B) point in the same direction.

5. Attach the right side (Ref. No. 3) to the back in the same

manner as you did in step 3, again making sure that

the ange is around the back and that the lances on

the shelf adjustment strips are pointed in the same

direction as those on the back and left side. Push the

side panel up so the studs in the top go through the holes

in the top ange of the side and fasten with three nuts.

6. Attach the sill (Ref. No. 4) to the sides. Place a nut

(Ref. No. 19) loosely on each of the studs and slide

the ends of the sill into the slots on both sides of the

unit. Then, securely tighten the nuts.

4. Attach the top (Ref. No. 8) to the unit by sliding the outer

ange over the back of the unit and the side ange to the

side panel on the unit. The threaded studs should go

through the holes in the top ange

of the side and fasten with

three nuts. Attach the

back to the top

using four

bolts and nuts.

All lances point UP on

the back and side.

Flange faces upward.

Flange goes

under back.

Slide ends into the slots on

the bottom of the sides.

7. Place the rear ange of the bottom shelf (Ref. No. 5)

into the bottom lances of the back. The ange with two

holes should face the front, hanging over the sill.

Nuts places loosely

on studs of the sill.

Insert the bottom into the bottom lances.

1. Place the locking handle

(Ref. No. 10) on the right

hand door and fasten with

two #8-32 X 1/4 hex-head

bolts and lock washers,

provided with the handle.

2. Turn the handle to the

open position and

place the locking cam

(Ref. No. 11) over the

square shank of the

door handle. The latch

must be facing downward

as shown. Then place the

locking cotter pin (Ref. No.

13) through the hole of the

square shank.

3. With the handle still in the open position, hook the

locking bars (Ref. No. 9) to the locking cam (see

“A” at left). Once in position, slowly rotate the door

handle to the closed position so the lock bars

prot rude from the holes at the top and bottom

of the door (shown at right, below).

4. Slide the nylon lock bar

guide inserts (Ref. No.

12) over the lock bar

ends and through the

door slots (see “B” at

right). Push down rmly

until the guides snap

into place.

5. Attach the “dummy” handle

(Ref. No. 14) using two

#8-32 X 1/4 hex-head bolts

and lock washers.

Handle/Locking System Installation

8. Set the unit upright. Insert the second shelf at the desired

level. Be sure that the ange with the two holes should

face the front.

10. Cabinet must be level for doors to

open and close properly. Insert a

athead screwdriver into the two

leveling holes and turn the screws

until the cabinet is level. The cabinet

is now ready for use.

NOTE: In order to place the shelf, you must ﬁrst tilt

the shelf slightly to the left or right before inserting

into the unit.

9. Attach the left door (Ref. No. 6) to the unit by placing the

door on the hinges, aligning the hinge holes, placing the

hinge pins (Ref. No. 15) into the slots and tapping them in

until secure. Attach the right door (Ref. No. 7) to the unit

in the same manner as the left door.

Produktspecifikationer

Varumärke:	Tennsco
Kategori:	Garderob
Modell:	J1842A-SND
Enhetsplacering:	Ingebouwd
Typ av operation:	Draaiknop
Färg på produkten:	Zwart
Antal effektnivåer:	9
Inbyggd display:	Nee
Timer:	Nee
Vikt:	18000 g
Bredd:	752 mm
Djup:	520 mm
Höjd:	45 mm
Förpackningens vikt:	19000 g
Typ av material (överst):	Glas
Brännare/kokzonseffekt 2:	1000 W
Brännare/kokzonseffekt 3:	4000 W
Brännare/kokzonseffekt 1:	1750 W
Antal brännare/kokzoner:	5 zone(s)
Typ av häll:	Gaskookplaat
Brännare/kokzon typ 1:	Regulier
Brännare/kokzon typ 2:	Sudderen
Typ av brännare/kokzon 3:	Extra groot
Antal gasbrännare:	5 zone(s)
Antal elektroniska kokzoner:	0 zone(s)
Kontrollposition:	Boven voorzijde
Ansluten last (elektrisk):	- W
Installationsfackets bredd:	560 mm
Installationsfack höjd:	45 mm
Nuvarande:	3 A
Ansluten last (gas):	11500 W
Pannstödsmaterial:	Gietijzer
Installationsutrymmets djup (min):	480 mm
Antal kokzoner som ska användas samtidigt:	5
Typ av brännare/kokzon 4:	Groot
Brännare/kokzonseffekt 4:	3000 W
Strömkälla brännare/kokzon 1:	Gas
Strömkälla brännare/kokzon 2:	Gas
Strömkälla brännare/kokzon 3:	Gas
Strömkälla för brännare/kokzon 4:	Gas
Installationsutrymmets djup (max):	492 mm
Wokbrännare:	Ja
Wokbrännares läge:	Midden
Placera brännare/kokzon 1:	Links achter
Placera brännare/kokzon 2:	Links voor
Placera brännare/kokzon 3:	Centraal
Placera brännare/kokzon 4:	Rechts achter
Kokzon 1 form:	Rond
Kokzon 2 form:	Rond
Kokzon 3 form:	Rond
Kokzon 4 form:	Rond
AC-ingångsspänning:	220-240 V
AC-ingångsfrekvens:	50 - 60 Hz
Strömkälla för brännare/kokzon 5:	Gas
Typ av brännare/kokzon 5:	Regulier
Placera brännare/kokzon 5:	Rechts voor
Brännare/kokzonseffekt 5:	1750 W
Kokzon 5 form:	Rond