Thermocet Trimline 2050 OH - 1080 Bruksanvisning

Thermocet Härda Trimline 2050 OH - 1080

Läs nedan 📖 manual på svenska för Thermocet Trimline 2050 OH - 1080 (40 sidor) i kategorin Härda. Denna guide var användbar för 4 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Sida 1/40
Page 1
OPERATING AND INSTALLATION INSTRUCTIONS
1080
Trimline 2050 OH
UNITED KINGDOM-UK IRELAND-IE
Page 2
TABLE OF CONTENTS
1. General Page 3
1.1 Contents of the package
2. Safety of the unit Page 4
2.1 Safety
3. Remote control Page 5
3.1 General
3.2 Manual transmitter
3.3 Screen setup
3.4 Time setup
3.5 Setting the Timer
3.6 Controls (remote control)
3.7 Possible error messages
3.8 Setting the flame size / Extinguishing the fire
3.9 Switching the unit off
3.10 Inserting and replacing the batteries
4. Manual control Page 8
4.1 Igniting the fire
4.2 Extinguishing the fire
4.3 Switching the unit off
5. Initial start-up Page 9
5.1 Daily maintenance
5.2 Important tips
6. Installation instructions Page 10
6.1 General instructions
7. Concentric flue system Page 11
7.1 Components of the concentric flue system
7.2 Construction of concentric flue system
7.3 Installation instructions regarding existing flues.
7.4 Parts
7.5 Installation
7.6 Cleaning and maintenance
8. Instructions for the Mertik Maxitrol GV60 and the Remote Control Page 15
8.1 Mertik Maxitrol Troubleshooting Flow Chart Page 17
9. Maintenance check-up list Page 21
10. Maintenance activities Page 22
11. Installing the unit Page 23
11.1 Connection to the gas pipes
11.2 Preparation and installation of the unit
11.3 Fitting the ceramic log inset
12. Technical details GV60 Page 25
12.1 Gas-technical specifications Page 26
13. Problems and possible Solutions Page 27
Table of concentric pathways Page 28
Illustrations Page 2838
ALL RIGHTS RESERVED.
(6/30012014)
Page 3
We hope you really enjoy the warmth of your new gas fire Read these instructions carefully before
installing and using the gas fire. Keep these instructions in a safe place. Always provide the following
information if the gas fire breaks down: model and serial number, which can be found on the unit. Your
purchase invoice is your proof of warranty.
1. General
Check the unit immediately after delivery to confirm that it has not been damaged during transport. If it is
damaged in any way, please inform your supplier immediately and provide as many details as possible.
Attention
The unit must be installed, connected and checked by a qualified fitter based on national, regional, and local
standards and regulations. The fitter must inspect the unit for tightness in relation to gas and combustion
products and correct operation of the different components and functions.
The flue tube system and the outlets in the outer wall or roof face must also meet the requirements of the
applicable regulations.
The unit falls in the closed unit category, in a set-up location without a fan and with a chimney loss that is
greater than 17 % (non-condensing).
Warning
Gas fires become hot when in use. After installation of the Gas fire, the glass surface must be considered as
active zone. The glass surface may be very hot.!
Therefore care should be taken, for example, by keeping children and those requiring help away from the
immediate vicinity of burning fires. Gas fires must not be placed on or against flammable materials
(curtains, etc.).
Contents of the packaging
1 x Fully assembled unit:
Trimline 2050 OH
1 x Remote control
2 x Restriction plate
1 x 9 V battery
4 x 1.5 V AA battery
1 x Operating and installation instructions
1 x Wood imitation set
1 x Suction cap
Additional
Mantle/support iron

Produktspecifikationer

Varumärke: Thermocet
Kategori: Härda
Modell: Trimline 2050 OH - 1080

Behöver du hjälp?

Om du behöver hjälp med Thermocet Trimline 2050 OH - 1080 ställ en fråga nedan och andra användare kommer att svara dig




Härda Thermocet Manualer

Härda Manualer

Nyaste Härda Manualer