Toa SR-FB4 Bruksanvisning

Toa Inte kategoriserad SR-FB4

Läs nedan 📖 manual på svenska för Toa SR-FB4 (2 sidor) i kategorin Inte kategoriserad. Denna guide var användbar för 3 personer och betygsatt med 4.5 stjärnor i genomsnitt av 2 användare

Ladda ner PDF
Sida 1/2
Printed in Japan
133-01-438-90
3
1
2
4
Remove 8 attached screws.
Note
The removed screws are not used.
Speaker mounting
bracket
Speaker
SR-EP4 Extension Plate (optional)
Suspension bracket (A)
Suspension bracket (B)
Mounting hole
[When suspending the speaker with 2 wires]
[When suspending the speaker with 1 wire]
Machine screw
M6 x 15 (accessory)
Hexagon head bolt M8 x 20
with washer (accessory)
Hexagon head bolt M5 x 20 with washer (accessory)
Hexagon head bolt M8 x 20 with washer (accessory)
Plain washer for M6
(accessory)
Spring washer for M6 (accessory)
Note
For speaker joint procedures,
refer to the instruction manual
supplied with the SR-S4L/S4S
Line Array Speaker.
INSTALLATION MANUAL
FLYING BRACKET SR-FB4
The SR-FB4 is designed to be used exclusively to suspend the
SR-S4L or SR-S4S Line Array Speaker.
Select the appropriate suspension holes to adjust the speaker's
downward angle.
A total of up to three SR-S4L and/or SR-S4S can be joined with
the SR-FB4 bracket.
Since the bracket is designed for indoor use, do not install it
outdoors.
1. SAFETY PRECAUTIONS
•Before installation or use, be sure to carefully read all the
instructions in this section for correct and safe operation.
•Be sure to follow all the precautionary instructions in this section,
which contain important warnings and/or cautions regarding
safety.
•After reading, keep this manual handy for future reference.
4. SPECIFICATIONS
• Accessories
Hexagon head bolt M8 x 20 (with washer) ........ 6
Machine screw M6 x 15 ..................................... 2
Plain washer (for M6) ......................................... 2
Spring washer (for M6) ...................................... 2
Hexagon head bolt M5 x 20 (with washer) ........ 8
• Option
Extension plate: SR-EP4
Note: The design and specifications are subject to change without notice for
improvement.
Step 1. Attach the suspension brackets (A) and (B)
to the speaker mounting bracket.
Note
The direction in which brackets (A) and (B)
face each other differs depending on
whether 1 or 2 wires are used to suspend the
speaker.
Step 2. Remove the screws on both sides of the
speaker.
Step 3. Attach the speaker mounting bracket to the
speaker.
Step 4. When joining 2 or 3 speakers, use the
optional SR-EP4 Extension Plate(s) to join
the speakers.
3. INSTALLATION
Select the appropriate angle adjustment suspension hole to
make the speaker face down at the desired angle.
2. SUSPENDING THE SPEAKER
Note
When suspending the speaker, the angle of
the suspension wires must be within 5° from
the vertical axis.
The mounting position for the suspension bracket can be
moved up to 20 mm back and forth, permitting fine adjustment
of the suspension angle.
When the speaker is suspended, if
the downward angle is insufficient,
attach another SR-FB4 bracket to
the speaker's bottom surface, and lift
the speaker backward using wires.
Note
The ang le of the wires must be
within 5° from the vertical axis, and
the inclination angle of the bottom of
the lowest-positioned speaker within
30° from the horizontal axis.
Angle adjustment
suspension hole
Suspension bracket
Wire Within 5 each Within 5 each° °
Wire
Speaker
Suspension
bracket
20 mm
Within 30°
Within 5 Within 5° °
Wire
Speaker
SR-FB4
•Refer all installation work to the dealer from whom the speaker
was purchased. Installation for flying requires extensive technical
knowledge and experience. The speaker may fall off if incorrectly
installed, resulting in possible personal injury.
•Flying Precautions
Be sure to follow the instructions below. Otherwise, the
suspension wires or belts may be off or snap and the speaker
may fall off, causing personal injury.
·Check to confirm that the suspension wires and belts are
strong enough to withstand the speaker load.
·The suspension wires must be securely linked with the bracket.
·All parts and components (such as enclosures, metal pieces,
and screws) must be free from any deformation, crack, and
corrosion.
·Be sure to use screws supplied with the bracket when
mounting it to the speaker.
•Install the unit only in a location that can structurally support the
weight of the unit and the speaker. Doing otherwise may result in
the speaker falling down and causing personal injury and/or
property damage.
•Owing to the speaker's size and weight, be sure that at least two
persons are available to install the speaker. Failure to do so
could result in personal injury.
•Do not use other methods than specified to mount the bracket.
Extreme force is applied to the unit and the speaker could fall off,
possibly resulting in personal injuries.
•Use nuts and bolts that are appropriate for the ceiling's structure
and composition. Failure to do so may cause the speaker to fall,
resulting in material damage and possible personal injury.
•Tighten each nut and bolt securely. Ensure that the bracket has
no loose joints after installation to prevent accidents that could
result in personal injury.
Indicates a potentially hazardous situation which, if mishandled,
could result in death or serious personal injury.
WARNING
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
CAUTION
•Avoid touching the unit's sharp metal edge to prevent injury.
•Do not stand or sit on, nor hang down from the unit as this may
cause it to fall down or drop, resulting in personal injury and/or
property damage.
•Have the unit checked periodically by the shop from where it
was purchased. Failure to do so may result in corrosion or
damage to the unit that could cause the unit to fall, possibly
causing personal injury.
Number of Speakers Max. 3 (when jointed with an optional SR-EP4)
to be Suspended
Finish Steel plate, white, paint
Dimensions 168 (w) x 170 (h) x 284 (d) mm (complete assembly)
Weight 2.9 kg (including accessories)
Product Composition Suspension bracket A ...... 1,
Suspension bracket B ...... 1,
Speaker mounting bracket ...... 1

Produktspecifikationer

Varumärke: Toa
Kategori: Inte kategoriserad
Modell: SR-FB4

Behöver du hjälp?

Om du behöver hjälp med Toa SR-FB4 ställ en fråga nedan och andra användare kommer att svara dig


Inte kategoriserad Toa Manualer

Toa

Toa SR-WB4 Bruksanvisning

21 Oktober 2024
Toa

Toa YW-7000 Bruksanvisning

11 Oktober 2024
Toa

Toa ST-34B Bruksanvisning

26 September 2024
Toa

Toa PJ-304 Bruksanvisning

26 September 2024
Toa

Toa PE-604 Bruksanvisning

26 September 2024
Toa

Toa TS-922 Bruksanvisning

26 September 2024
Toa

Toa SC-630TU Bruksanvisning

24 September 2024
Toa

Toa SR-SA4 Bruksanvisning

24 September 2024
Toa

Toa ST-800 Bruksanvisning

24 September 2024
Toa

Toa HY-C0801W Bruksanvisning

24 September 2024

Inte kategoriserad Manualer

Nyaste Inte kategoriserad Manualer

Philips

Philips 43PUL7672 Bruksanvisning

27 Oktober 2024
Manhattan

Manhattan 461504 Bruksanvisning

27 Oktober 2024
Sungrow

Sungrow SG125HV Bruksanvisning

27 Oktober 2024
Schneider

Schneider CCT724319 Bruksanvisning

27 Oktober 2024
Technoline

Technoline WS 250 Bruksanvisning

27 Oktober 2024
Livarno

Livarno IAN 354423 Bruksanvisning

27 Oktober 2024
Kupper

Kupper 12152 Bruksanvisning

27 Oktober 2024
JennAir

JennAir CARBON24L Bruksanvisning

27 Oktober 2024
Medion

Medion Life E74001 (MD 81035) Bruksanvisning

27 Oktober 2024
POLARIS

POLARIS Sportsman Touring 850 SP (2015) Bruksanvisning

27 Oktober 2024